GB GB
uResting the back of the ink pad inside the
pad cradle slide the pad into the slot of
the stamp.
uIn order to return to the print position,
simply push down on handle .
To park the stamp _Fig. 5
To prolong the life of the inkpad,
park the stamp!
uPress and hold button on the front plate.
uGently push handle downwards until the
stamp clicks & locks in a raised position.
uIn order to return to the print position,
simply push down on handle .
To set the stamp wheels _Fig. 1+ 2+ 3
uPress the handle to the bottom of its
travel, then while still holding it.
uPress and hold button on the front plate.
uAllow the handle to move upwards until
the handle locks in place.
uYou will be able to move the stamp wheels
freely with the stylus .
uIn order to return to the print position,
simply push down on handle .
You can easily place the date or the number one
position further!
(Not valid for the stamp Model D28c.)
uPress the switch button once.
This applies to the stamp D28bN:
uTo automatically place the number one
position further in every stamping process,
rotate the rotary switch 90°.
To insert the inkpad _Fig. 1+ 4
Handle with caution to avoid dirt from ink!
uPress the handle to the bottom of its
travel, then, while still holding it.
uPress the button on the front plate and
continue to hold it.
uAllow the handle to move upwards until
the handle locks in place.
uUnpack the inkpad carefully.
uSqueeze the grips on the back of the
inkpad and hold them.
A
A
A
B
B
F
E
A
B
J
A
A
A
K
CD
A