Reliable PRONTO 200CS User manual

QUICK START GUIDE
PRONTO 200CS
Having trouble? Call us.
For service and/or technical assistance
on this product, call our toll free
number or email our support staff
1-800-268-1649
[e-mail]
For more information on your product,
to view instructional videos or to
download the full user manual, visit
reliablecorporation.com
FROM WHERE YOU LIVE
TO WHAT YOU WEAR, WE’RE
RIGHT THERE WITH YOU
At Reliable, we do what we love, and we take pride in
doing it right. Quality, functionality, design and customer
service play an equally important part in delivering what’s
right for you. From irons to steam cleaners to sewing
machines, you can count on us to be right there with you.
That’s the Reliable Way.
V3_Pronto 200CS - Quick Start Guide.indd 1V3_Pronto 200CS - Quick Start Guide.indd 1 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

What’s Inside
APronto 200CS Body
BHigh Pressure Steam Nozzle
Cx2 30mm Nylon Brushes
Dx2 30mm Brass Brushes
Ex2 60mm Nylon Brushes
FAccessory Storage Bag
A
B
C
D
E
F
Using Your Pronto 200CS
1Attach the high
pressure steam
nozzle to the
front of the unit.
3Lift open the rubber lid cap. Fill
tank with 350mL of water, careful
not to overfill. Close rubber cap
securely to avoid any leaks.
4Attach water tank back
onto Pronto unit. You
will hear a faint
click when it
is securely
in place.
2Push unlock
button to
remove water
tank.
7Plug your system into an outlet. Once
plugged in, the light on the top of the
unit will flash. Wait up to 30 seconds
until the light turns a solid color. Once
a solid color appears, the system is
ready for use.
8Based on your cleaning needs, either
utilize the high pressured steam nozzle,
or connect one of the attachments to
the front of the nozzle.
NOTE: As water is
drawing into the
unit, you will hear
a chugging sound.
Once the unit is
fully activated, this
sound will cease.
ATTACHMENT RECOMMENDED USE
High Pressure
Steam Nozzle
Ideal for most cleaning
applications
Nylon Brush
Can be used around sinks,
to clean grout lines, etc
Brass Brush
Ideal for metal safe surfaces
(e.g., BBQs)
9Place your Pronto 1-2 inches away
from the area that you would like
to clean. Push the trigger once to
release steam and move the system
slowly back and forth over the desired
area. Do not hold down the trigger.
10 Adjust the steam
setting from low to
high based on your
cleaning needs.
11 Push the
trigger on the
handle again
to stop steam
output. It may
take a few
seconds for all
the steam to
release.
12 When you are finished
cleaning, ensure to
unplug the device.
Maintenance
1Ensure that
the unit is
off and has
cooled
completely.
2Empty the
tank of any
residual water.
3Wipe surface
of machine
with a soft,
clean cloth.
4Allow time for
product to dry
before storing.
Troubleshooting
My Pronto 200 is producing
reduced/no steam
If your Pronto 200CS is not producing any
steam, or producing very little, first check that
your unit is on and wait until the steam-ready
light is a solid color. Another possible cause is
that the water tank is empty. Check your water
tank level to see if the unit requires more water.
Always ensure to unplug your Pronto prior to
filling it with water.
My Pronto’s steam-ready light
keeps flashing
If the steam-ready light on your Pronto 200CS
keeps flashing, this may indicate that the unit is
reheating. Wait until the unit has reheated prior
to continuing your cleaning regimen.
My Pronto unit keeps making a
chugging sound
If your unit is making a chugging sound upon
initial startup, this is the water drawing into the
unit. Wait until the unit is fully activated and the
chugging sound will stop. If your unit is making
the chugging sound after you’ve already started
up your unit, perhaps the water tank is close
to empty. Refill your water tank before further
cleaning.
My Pronto is leaking water
Check the water tank cap to make sure it is
secure. If not, close rubber lid securely and
ensure that the surrounding area is dry. Also
be sure not to overfill water tank in order to
avoid leakage.
V3_Pronto 200CS - Quick Start Guide.indd 2V3_Pronto 200CS - Quick Start Guide.indd 2 2020-12-14 12:07 PM2020-12-14 12:07 PM

QUICK START GUIDE
PRONTO 200CS
Having trouble? Call us.
For service and/or technical assistance
on this product, call our toll free
number or email our support staff
1-800-268-1649
[e-mail]
For more information on your product,
to view instructional videos or to
download the full user manual, visit
reliablecorporation.com
FROM WHERE YOU LIVE
TO WHAT YOU WEAR, WE’RE
RIGHT THERE WITH YOU
At Reliable, we do what we love, and we take pride in
doing it right. Quality, functionality, design and customer
service play an equally important part in delivering what’s
right for you. From irons to steam cleaners to sewing
machines, you can count on us to be right there with you.
That’s the Reliable Way.
V3_Pronto 200CS - Quick Start Guide.indd 1V3_Pronto 200CS - Quick Start Guide.indd 1 2020-12-14 12:07 PM2020-12-14 12:07 PM

QUICK START GUIDE
PRONTO 200CS
Having trouble? Call us.
For service and/or technical assistance
on this product, call our toll free
number or email our support staff
1-800-268-1649
[e-mail]
For more information on your product,
to view instructional videos or to
download the full user manual, visit
reliablecorporation.com
FROM WHERE YOU LIVE
TO WHAT YOU WEAR, WE’RE
RIGHT THERE WITH YOU
At Reliable, we do what we love, and we take pride in
doing it right. Quality, functionality, design and customer
service play an equally important part in delivering what’s
right for you. From irons to steam cleaners to sewing
machines, you can count on us to be right there with you.
That’s the Reliable Way.
V3_Pronto 200CS - Quick Start Guide.indd 1V3_Pronto 200CS - Quick Start Guide.indd 1 2020-12-14 12:07 PM2020-12-14 12:07 PM