Renesas RTE7701201CFK144T000R User manual

User’s Manual
R20UT3176EJ0100 Rev. 1.00 Page 1 of 5
Sep. 05, 2014
RTE7701201CFK144T000R
Exchange Adapter for Connecting RH850/E1x Series
in 144-pin 0.5-mm-pitch LQFP
1. Outline
The RTE7701201CFK144T000R is an exchange adapter (EA) for
connecting the RTE7701202EPA00000J emulator pod for the RH850/E1x
(subsequently referred to as the pod) to pad patterns for a 144-pin 0.5-mm-pitch
LFQFP (PLQP0144KA-A).
2. Package Components
Check to see if the RTE7701201CFK144T000R package has all the following
contents with reference to Contents of the Package included in the package after
purchasing this product.
(1)
RTE7701201CFK144T000R exchange adapter
1 pc.
(2)
Table of Toxic and Hazardous Substance and Elements 1 sh.
3. Specifications
Table 1 Specifications
Applicable package PLQP0144KA-A
(144-pin 0.5-mm-pitch LFQFP)
Insertion/removal
iterations of connector 100 times guaranteed
4. Usage (See Figure 2)
The RTE7701201CFK144T000R can be used for debugging and on-board
evaluation in common by mounting the TC on the target system.
(1) For debugging
Mount the TC on the pad pattern for the MCU on the target
system board and attach the EC above it. In addition,
connect the RTE7701201CFK144T000R to the pod, and then attach
the RTE7701201CFK144T000R above the EC.
The height of the socket is adjustable by inserting the SA between the EC
and RTE7701201CFK144T000R if this is desired.
(2) For on-board evaluation
Mount the TC, an MCU with on-chip flash memory or one-time PROM,
and the MA, in that order, on the target system.
Before using the RTE7701201CFK144T000R, be sure to read the precautions
on page 4.
R20UT3176EJ0100
Rev. 1.00
Sep. 05, 2014
Figure 1 External View of the RTE7701201CFK144T000R
Figure 2 Usage of the RTE7701201CFK144T000R
SA: Space adapter (sold separately, product of Renesas Electronics
Corporation)
Model Name: QB-144GJ-YS-01T
EC: Emulator connector (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ-YQ-01T
*The QB-144GJ-YQ-01T package includes the YQ guides.
TC: Target connector (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ-NQ-01T
MA: Mounting adapter (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ -HQ-01T
RTE7701201CFK144T000R exchange adapter
●in the figure indicates an example of the location of the pin that
governs alignment. Be sure to align the pin one positions of the pad
pattern on the board and the other parts.
Flash memory MCU and etc.
EC
TC
YQ guides (four) MA
(2) For on-board evaluation
(1) For debugging
R
ENESAS
RTE7701202EPAxR
SA
RTE7701201CFK144T000R
144-pin 0.5-mm-pitch
PLQP0144KA-A) pad patterns
Pod for RTE7701202EPA00000J (sold separately)

RTE7701201CFK144T000R User’s Manual
R20UT3176EJ0100 Rev. 1.00 Page 2 of 5
Sep. 05, 2014
5. Connection Procedure (See Figure 3)
The procedure for connecting the RTE7701201CFK144T000R is shown below.
(1) Mount the TC on the target system.
(a) Thinly apply a two-part curing-type epoxy-based adhesive (with curing
taking at least thirty minutes) to the tips of the four protrusions from the bottom
surface of the TC to be bonded to the target system (before using the adhesive,
use alcohol or another suitable solvent to clean the surface of the target system).
If you have difficulty aligning the positions of the leads of the TC with the pads
on the target system, adopt the method described in (b) below.
(b) Use guide pins (NQ guide) to align positions attached to the TC by
inserting the pins into the sockets for this purpose on the top of the TC.
These are two or three non-through holes with a diameter of 1.0 mm.
Refer to the drawings of your TC for more information on the socket positions.
(c) Solder the TC to the target system. If an MA is to be included, attach the
MA before soldering the TC. The MA is used to prevent scattered flux or solder
creating problems by becoming attached to the contact pins of the TC.
Conditions for soldering
Reflow: within 10 seconds at 260°C
Manual soldering: within 5 seconds at 350°C (per pin)
Cautionary note: Do not wash the flux away by immersion or
vapor treatment.
(d) Remove the guide pins or MA if they were used.
(2) Attach the EC to the TC.
Attach the EC above the TC after confirming there are neither cracks nor bends
on the contact pins of the EC.
(3) Secure the four corners of the EC with the YQ guide screws that came
with the EC.

Screws supplied with the EC
Use the flathead screwdriver or torque driver supplied with the
EC to secure, in order, the screws at the four corners. The
tightening torque of a YQ guide should be no more than 0.054
Nm. Securing the scre
ws too tightly will lead to faulty
connections.
(4) Attach the pod to the RTE7701201CFK144T000R.
(5) Attach the RTE7701201CFK144T000R to the EC.
Adjusting the height of the socket
The height of the socket is adjustable by inserting an SA between
the EC and the RTE7701201CFK144T000R.
(1)
(2)
(3)
(5)
Use the flathead screwdriver
●in the figure indicates an example of the location of the pin that
governs alignment. Be sure to align the pin one positions of the pad
pattern on the board and the other parts.
R
ENESAS
RTE7701202EPAxR
(4)
YQ guides (four)
EC
TC
SA
Figure 3 Procedure for Connecting the
RTE7701201CFK144T000R
Pod for RTE7701202EPA00000J (sold separately)
RTE7701201CFK144T000R
144-pin 0.5-mm-pitch
(PLQP0144KA-A) pad patterns
SA: Space adapter (sold separately, product of Renesas Electronics
Corporation)
Model Name: QB-144GJ-YS-01T
EC: Emulator connector (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ-YQ-01T
*The QB-144GJ-YQ-01T package includes the YQ guides.
TC: Target connector (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ-NQ-01T
MA: Mounting adapter (sold separately, product of Renesas Electronics
Corporation)
Model name: QB-144GJ -HQ-01T

RTE7701201CFK144T000R User’s Manual
R20UT3176EJ0100 Rev. 1.00 Page 3 of 5
Sep. 05, 2014
6. Drawing of the Socket Assembly, Drawing with Dimensions, and Pad Pattern for
Reference
Unit [mm]
EC
xxMHz
9.6
RTE7701201CFK144T000R
55.0
Figure 4Drawing of the Socket Assembly
Unit [mm]
*This dimension is increased by 3.2 mm if QB-144GJ-YS-
01T is used to adjust the height of the socket.
18.0*
0.5×35 = 17.5
0.5
0.2
0.5×35 = 17.5
40.0
55.0
2
RTE7701201CFK144T000R
CN1
MADE IN JAPAN
CN2 CN3
60 62 120
159 61 119
260 62 120
159 61 119
119 61 59 1
120 62 60 2
5.55.5
5.0
13.0
13.0
Figure 5Drawing with Dimensions and a Pad Pattern for Reference

RTE7701201CFK144T000R User’s Manual
R20UT3176EJ0100 Rev. 1.00 Page 4 of 5
Sep. 05, 2014
7. Precautions and WEEE Directive
CAUTION
Cautions to be Taken for This Product:
Use the YQ guides supplied with the EC to attach the QB-144GJ-YQ-01T.
IMPORTANT
Note on This Product:

This product is not reparable.
Disposal Instruction (This is only valid in the European Union.):
Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic
Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed of as
household waste but through your locally recognised recycling or disposal schemes. As part of our commitment to environmental
responsibility Renesas also offers to take back the equipment and has implemented a Tools Product Recycling Program for
customers in Europe. This allows you to return equipment to Renesas for disposal through our approved Producer Compliance
Scheme. To register for the program, click here “http://www.renesas.com/weee".

Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits,software, and information in the design ofyour equipment. Renesas Electronics assumes no responsibility forany losses incurred by you orthird parties arising fromthe
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrantthatsuch information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errorsin or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement ofpatents, copyrights, or other intellectual property rights ofthird parties by or arising from the use ofRenesas Electronics products or
technical information described in this document. No license, express,implied or otherwise, is granted hereby under any patents,copyrights orotherintellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product,whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy orotherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade,as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neitherintended nor authorized foruse in productsor systems thatmay pose a direct threat to human life or bodily injury (artificial life supportdevices or systems,surgical
implantations etc.),or may cause serious property damages (nuclear reactor control systems,military equipmentetc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may notuse any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you orthird parties arising from the use ofany Renesas Electronics product forwhich the productis not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximumrating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability ofits products, semiconductor products have specific characteristics such as the occurrence offailure ata certain rate and
malfunctions under certain use conditions. Further,Renesas Electronics products are notsubject to radiation resistance design. Please be sure to implementsafety measures to guard them against the
possibility ofphysical injury,and injury or damage caused by fire in the eventof the failure of a Renesas Electronics product,such as safety design forhardware and software including but not limited to
redundancy,fire control and malfunction prevention,appropriate treatmentfor aging degradation or any other appropriate measures. Because the evaluation of microcomputersoftware alone is very difficult,
please evaluate the safety ofthe final products or systemsmanufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations thatregulate the inclusion or use ofcontrolled substances, including withoutlimitation, the EU RoHS Directive. Renesas Electronics assumes
no liability fordamages or losses occurring as a result of yournoncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may notbe used for orincorporated into any products or systems whose manufacture,use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this documentfor any purpose relating to military applications or use by the military, including but not limited to the
development ofweapons of mass destruction. When exporting the Renesas Electronics productsor technology described in this document,you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. Itis the responsibility of the buyer ordistributorof Renesas Electronics products,who distributes,disposes of,or otherwise places the productwith a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you orthird parties as a result ofunauthorized use ofRenesas Electronics
products.
11. This document may not be reproduced or duplicated in any form,in whole or in part, without prior written consent ofRenesas Electronics.
12. Please contact a Renesas Electronics sales office if you have anyquestions regarding the information contained in this documentor Renesas Electronics products,or if you have anyother inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or forRenesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A.
Tel: [phone], Fax: [phone]
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: [phone], Fax: [phone]
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: [phone], Fax: [phone]
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: [phone], Fax: [phone]
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: [phone], Fax: [phone]
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: [phone], Fax: [phone]
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: [phone], Fax: [phone]
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: [phone], Fax: [phone]
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: [phone], Fax: [phone]
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: [phone], Fax: [phone]
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Ku, Seoul, 135-920, Korea
Tel: [phone], Fax: [phone]
SALES OFFICES
© 2014 Renesas Electronics Corporation. All rights reserved.
Colophon 4.0
© 2014 Renesas Electronics Corporation and Renesas Solutions Corp.
Colophon 4.0
Renesas Tools Website http://www.renesas.com/tools
All trademarks and registered trademarks are the property
of their respective owners.
If the requirements shown in the "CAUTION"
sentences are ignored,
the equipment may cause
personal injury or damage to the products.