ReptiZoo PALUDARIUM ECO User manual

PALUDARIUM ECO KNOCK-DOWN GLASS
TERRARIUM INSTRUCTION MANUAL
Safety and Maintenance
1.This product is not suitable for children to play as toys.
2.For indoor use only, do not place the assemble terrarium under the sun.
Important Safety Information
1.【Warning】Failure to follow these safety instructions may result in product damage and personal safety.
2.【Usage】Please read all safety information before using the product.
3.【Maintenance】Do not disassemble the product. If the product is damaged or malfunctioning, please
contact ETAN PET SUPPLIES or Authorized distributors.
You can scan the code to follow Official WeChat account or find out more information about services at:
www.repti-zoo.com
Company Name: Dongguan ETAN Pet Supplies Co.,Ltd
Website: www.repti-zoo.com
Address: No.3 JinXinEr Road, Qingxi Town, Dongguan City, Guangdong Province, China
7.Install Cable pass component
B2
B1
A
B
A
B1
B2
Put B1 outside of terrarium
and B2 inside of terrarium and
then rotate B2 clockwise.
Please align the arrow and
install A into B.
Please follow the direction
"CLOSE” and rotate it to lock.
SLIDING DOOR

The paludarium eco knock down glass terrarium adopts detachable sliding door, easy to disassemble,
assemble, transport and stock.
The metal mesh cover with new patent design is ventilated and air-permeable, which can place lamp fixture
to provide heat and UVB for your pet.
The air flow is conducive to reduce the temperature in the terrarium.
The design of water proof base makes it more suitable for aquatic and terrestrial animals; Raised bottom
frame design is easy to install heating pad and uniform heat dissipation.
Equipped with cable pass hole which is convenience for the device in terrarium connect to power supply.
The stacker is optional which can save space and better for ornamental.
1.Put the base on the ground, take out 4pcs tubes, then tighten it clockwise as below picture shown.
2.Insert the glass support strip along with the tube vertically. Please note that the glass support strips should
bu aligned with the bend corner of terrarium.
3.Install the back glass, left & right side glass and H-slots in turns. Details are as below.
4.Install the top frame after assembling the side glass.
5.Tighten the screw
6.Install the top cover and screw cover
Product overview
Parts list
Installation instruction
Right side
glass 1pc
Tubes 4pcs
H-slots 1pc
Black glass
2pcs
Screws 4pcs
Left side
glass 1pc
Base 1pc Top frame 1pc Top cover 1pc
Rubber Caps
4pcs
Screwdriver
1pc
Cable pass
1pc
Glass doors
2pcs
Screw Cover
Back Supports (2) Front Supports with
double slot. (2)