Rescue Source RQ3 Gear Storm Alpha User manual

Side aachment piece
G
Chin strap
Strap for securing helmet
Front vent for securing headlamp
G
Removable
ear pieces
Removable foam
G
Designed by rescue professionals for rescue professionals.
G
G
G

To Remove Ear Pieces
(1.) Use Allen Wrench with philips screw driver end to remove screws
holding ear pieces in place.
(2.) Remove plasc ear piece from helmet.
(3.) If ear pieces are wanted but you do not want your ears covered, the
foam ear piece can also be removed by slipping it out from the padding.
To Aach Visor
(1.) Use Allen Wrench to unscrew side aachment piece.
(2.) Align visor so holes line up to aachment point on helmet and use
the Allen Wrench to screw into place (visor will not be ush to helmet).
(3.) Visor should be able to move from top of helmet over eyes easily.
To Secure Headlamp
(1.) Aach headlamp strap onto helmet by placing clips in front two vents
of helmet (2.) Aach headlamp to back clip and secure onto the front
with the headlamp strap. (3.) Visor and headlamp cannot be worn at the
same me. OR,
(1.) Aach headlamp strap onto helmet by sliding the clips through the
front two vents so the strap sits on the inside of the helmet (2.) Aach
headlamp to back clip of helmet and secure on to the front with aaching
the clips to the headlamp.
Designed by rescue professionals for rescue professionals.