ReSound Match Series User manual

Technical Manual
ReSound Match ITE
GN ReSound as
Global Technical Operations
Lautrupbjerg 7 • DK-2750 Ballerup • Denmark
E-Mail: [email protected]

Doc. No. 0175820 rev. F
Page 2 of 16
Table of contents
Subject Page
Matrix ............................................................................................................. 3
Spare Part List ............................................................................................... 4
Faceplate Assemblies .................................................................................... 5
Blank Faceplates............................................................................................ 6
Hybrid Connections ........................................................................................ 7
Diagram....................................................................................................... 8-9
Receiver assembly ....................................................................................... 10
Prepare the faceplate ............................................................................ 11-12
Options ......................................................................................................... 13
Final Device ................................................................................................. 14
Service tool .................................................................................................. 15
Test Equipment ............................................................................................ 16

Doc. No. 0175820 rev. F
Page 3 of 16
Matrix
C3.1 Battery
Size 13
Normal Power Single Mic VC
(oating)
L-TRIMMER P-TRIMMER H-TRIMMER Push Button Telecoil
MA50-P x x x Standard Optional Opional Optional Not Optional Not Optional
MA2T50-P x x x Standard Standard Standard Optional Not Optional Not Optional
MA3T50-P x x x Standard Standard Standard Standard Not Optional Not Optional
Note:
• All ITE faceplate assemblies can be tted with three trimmers or less.
• If a trimmer is opted to be added / removed, the device must be recongured in the AUDIOMaster or the
Match Conguration Tool Software to reect correct option added / removed.
•The Match Conguration Software can be downloaded from the GTO website : http://gto.gnresound.com.

Doc. No. 0175820 rev. F
Page 4 of 16
Spare Part list
Item Part No.
Tubing,Q-ex,.100”ID X.120”OD 10038801
Tape, 3m., Doubleface (56X3.9MM) 10038905
Wrap for BK1610 receiver 15414300
Novec EGC-1700 (coat), 100 ml. 15290401
Flex-Hybrid, C3.1, Denmark 16016900
Microphone, EM-6717, Portless 15198100
Receiver, BK1610 15197800
Sleeve, Wire 11834-001
Wire, ESW, Blue, 7x50µ 14 mm. 15130314
Wire, ESW, Blue, 7x50µ 16 mm. 15130316
Wire, ESW, Blue, 7x50µ 22 mm. 15130322
Wire, ESW, Green, 7x50µ 8 mm. 15130208
Wire, ESW, Green, 7x50µ 13 mm. 15130213
Wire, ESW, Green, 7x50µ 16 mm. 15130216
Wire, ESW, Green, 7x50µ 22 mm. 1513022
Wire, ESW, Green, 7x50µ 28 mm. 15130228
Wire, ESW, Green, 7x50µ 32 mm. 15130032
Wire, ESW, Red, 7x50µ 14 mm. 15130014
Wire, ESW, Red, 7x50µ 16 mm. 15130016
Wire, ESW, Red, 7x50µ 22 mm. 15130022
Wire, ESW, Red, 7x50µ 28 mm. 15130028
Wire, ESW, Red, 7x50µ 32 mm. 15130032
Wire, ESW, Amber, 7x50µ 10 mm. 15130110
Wire, ESW, Amber, 7x50µ 22 mm. 15130122
Wire, ESW, Amber, 7x50µ 28 mm. 15130128
Option Part No.
Trimmer,L,150K,PJ63,Green 16667500
Trimmer,H,150k,PJ63,Yellow 16667600
Trimmer,P,150K,PJ63,Black 16667700
Analog VC Complete Part No.
VC, ASM, L 16857100
VC, ASM, R 16857000
Note: For conformal coating EGC-17000, check the
vendor website: www.3M.com to purchase locally. For
conformal coating SL1367 peters coat, check the vendor
website: www.peters.de to purchase locally.

Doc. No. 0175820 rev. F
Page 5 of 16
Faceplate Assemblies
VC, 2 Trimmer - Left, HP VC, 3 Trimmer - Left, HP
VC, No Trimmer - Left, HP

Doc. No. 0175820 rev. F
Page 6 of 16
Blank faceplates
13 FLT VC - Left 13 FLT VC - Right
Blank FP Single mic. Part No.
FP, 13, FLT VC, Light (L) 15185050
FP, 13, FLT VC, Medium (L) 15185051
FP, 13, FLT VC, Dark (L) 15185052
FP, 13, FLT VC, Light (R) 15185060
FP, 13, FLT VC, Medium (R) 15185061
FP, 13, FLT VC, Dark (R) 15185062
Battery Door 13 Part No.
Batt Door Left, Light 15185120
Batt Door Left, Medium 15185121
Batt Door Left, Dark 15185122
Batt Door Right, Light 15185110
Batt Door Right, Medium 15185111
Batt Door Right, Dark 15185112

Doc. No. 0175820 rev. F
Page 7 of 16
Hybrid connections (C3.1 Flex)
H12
H11
H10
H13 H14
H17
H21 H22
H16 H15
H1
H2H3
H4
H5H6
H8
H7H9H20
H18 H19
H12
H11
H10
H13 H14
H17
H21 H22
H16 H15
H1
H2H3
H4
H5H6
H8
H7H9H20
H18 H19
MIC +
MIC -
MIC(0)
MODULE
MODULE
BATT +
BATT -
REC -
REC +
NOTE : Coating EGC-1700 or SL1367 peters
coat must be added after soldering.

Doc. No. 0175820 rev. F
Page 8 of 16
Diagram - ITE Left
NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering.

Doc. No. 0175820 rev. F
Page 9 of 16
Diagram - ITE Right
NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering.

Doc. No. 0175820 rev. F
Page 10 of 16
Receiver assembly
BK1610 rec. wires are to
be routed as shown.
BK1610 rec: Place foam-
wrap p/n 15414300 as
shown.
NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering.

Doc. No. 0175820 rev. F
Page 11 of 16
Prepare the faceplate - Trimmer Installation
Mark target hole. Drill target hole. Remove debris and
insert trimmer,
Make trimmer ush
even on the external
side of faceplate.
Use Loctite 416 and
glue around the trim-
mer (internal side).
Let it cure.
NOTE : Do the same process
for additional trimmers. Let the
glue cure rst then operate the
trimmer to ensure that it is not
frozen.
Drill bit 0.076” or 1.93mm
for the trimmer hole

Doc. No. 0175820 rev. F
Page 12 of 16
Prepare the faceplate - VC Installation
Drill bit 0.159” or 4.038 mm
for the Analog VC hole
Mark target hole. Drill target hole. Remove debris and insert
Analog VC
Make sure that VC is not
protruding too much above
the highest point of the
external side of faceplate.
Use Loctite 416 and glue
around the VC (internal
side). Let it cure.
NOTE : Let the glue cure rst
then operate the VC to ensure
that it is not frozen.

Doc. No. 0175820 rev. F
Page 13 of 16
Options
P - TRIMMER
L - TRIMMER
E
S
A
E
S
AE
S
A
H - TRIMMER
Note: If a trimmer is opted to be added / removed, the device must be recongured in the AUDIOMaster or
the Match Conguration Tool software to reect correct option added / removed. The Match Conguration
Software can be downloaded from the GTO website: http://gto.gnresound.com

Doc. No. 0175820 rev. F
Page 14 of 16
Final Device
3 TRIMMER OPTION 2 TRIMMER OPTION

Doc. No. 0175820 rev. F
Page 15 of 16
Service Tool
When working on the assembled faceplate a heat sink (p/n 10158701) must always be used in order to prevent
damages to the components.
The tool can be used on both sides. One side for size 13 and 312, the other side to be used for size 10
Size 13 and 312 Size 10

Doc. No. 0175820 rev. F
Page 16 of 16
Test Equipment
Both programming cable sets shown on this page can be used
Connect the ex to the programming cable
by using the ex end marked with an arrow.
• Programming cable CS63 p/n 50931703
• Flex strip 10 pcs. p/n 50931703
Programming cable CS44 :
P/n 9022 907 69029, Blue (L)
P/n 9022 907 69019, Red (R)
P/n 9022 907 69579,
Flex adaptor CS44 (incl a ex strip)
When testing / programming a
battery pill must be used:
13
The device is to be congured with either AUDIOMaster or MATCH Conguration
Software for trimmer option changes. The Conguration Software can be down-
loaded from the GTO website http://gto.gnresound.com