Ress FM5 Pro User manual

RESS 9
6. Memory card
7. Technical data
Overall dimension 135 x 220 x 73 (W / H / D)
Weight ca. 1100 g
Casing Synthetic material / Powder-coated aluminum
Monitor 5 inches LCD-TFT color screen 102 x 73 mm
Storage media 2 GB SD-card
1 photo 32 kb (720x576 pixel)
300 second video
Power supply Lead acid battery 12 V/2,1 Ah
Voltage monitoring LCD-display
Operating time Approx. 2 hours (depending on the camera head that is being used)
Charging time Approx. 2 hours
The SD-card slot is on the top of the Handset. The
delivery contents an SD-card, where photos and
movies are saved onto.
Please note that the monitor supports SD-cards of
1-8 GB.
Insert the SD-card with the writing on top until you
hear a "click". Now the SD-card is locked and ready
to be used. To remove, please push the SD-card
until you hear a "click" again. The card will pop out
automatically. Now it can be connected to a reading
device (not supplied).

Always be fully aware of your safety! At all times!
Tips for the inspection
Inspection of a default
Inspection in the attic or on the rooftop
Cable use
Safety note
Always be fully aware of your safety! At all times!
12 RESS
To determine if the chimney has a default, hold the camera vertical in the centre of the chimney at
its lowest cleaning door. You will see the light on the monitor. Lead the camera in a circular motion
through the chimney. With a little practice, you will be able to determine the default and its direction.
A precise localization you can achieve from the attic.
After switching the device on, gently lower the camerahead into the chimney. By using a cable with
marks, you can see how deep the camera is inside. The cable has been made for this use, so even if
you use the full length, it will carry the weight of the camera easily. A roller-stand can come in quite
handy in this situation. It is available as an accessories (chimney door Art.-No.: 0042 / chimney cap
Art.-No.: 0043)
The working temperature for the camera cable should not fall below +5°C. There is a risk of cable breakage.

RESS GmbH & Co. KG
Am Hasselbruch 28
D-32107 Bad Salzuflen
Tel. ++ 49 52 08 / 91 27 0
Fax ++49 52 08 / 80 30
[e-mail]
Internet-Shop: www.ress.de 09.03.2018
RESS
The Producer
Visual Inspection Sweep Instruments Measuring Instruments