REVELL Corvette C6 Convertible User manual

If you have any questions or comments, call our hotline at: [phone]
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85195010200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
CORVETTE ®C6 CONVERTIBLE
STICKER PLACEMENT
11
KIT 1950 85195010200
NOTE: When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet
slightly to lift edge of sticker & use a fingernail to lift sticker from sheet. Line up sticker on body and press an edge
into place, slowly working sticker with a fingernail until sticker is fully on model.
• Studytheassemblydrawings.
• Eachplasticpartisidentifiedbyanumber.
• In the assembly drawings, some parts will be marked
by a star (★) to indicate chrome plated plastic.
• Forbetterpaintandstickeradhesion,washthe
plastic parts in a mild detergent solution. Rinse and
let air dry.
• Allowpainttodrythoroughlybeforehandlingparts.
• Anyunusedpartsmaybediscarded.
• Donotovertightenscrews
Caution:
Position all parts in this kit carefully. parts
will only snap together once.
READ THIS BEFORE YOU BEGIN LIRE CEQUI SUIT AVANT DECOMMENCER
• Etudier les schémas de montage.
• Chaque pièce en plastique est identifiée par un numéro.
• Surlesschémasdemontage,certainespiècessontmarquéesd'une
étoile (★)pourindiquerqu'ellessontenplastiquechromé.
• Pour une meilleure prise de la peinture et des autocollants, laver les
pièces en plastique avec une solution détergente peu concentrée.
Lesrinceretleslaissersécheràl'air.
• Laisser la peinture bien sécher avant de manipuler les pièces.
• Toute pièce inutilisée peut être jetée.
• Neserrezpastroplesvis.
Mise en garge:
Positionnez avec précaution toutes
les piéces de ce modéle réduit, car vous ne pouvezles
emboîter qu'uene seule fois.
The sixth generation
Chevrolet
®Convertible is
one of the best high perfor-
mance sport car bargains on
theplanet.Fromit'spowerfull
400HP V8 engine to the ultra
precision handling chassis,
the Corvette
®remains one
of the top American made-
sports cars in the world!
Your Revell model fea-
tures custom rolling wheels
with metal axles and screw-
on chassis. Easy Snaptite
assembly requires no glue or
painting. Colorful peel-and-
stickdecalsarealsoincluded.
Kit is molded in yellow, black,
transparent red and clear
plastic with chrome plated
parts and black vinyl tires.
KIT 1950 - page 8

KIT 1950 - page 2 KIT 1950 - page 7
INTERIOR ASSEMBLY
1REAR / MIRRORS ASSEMBLY 9
AB
C
D
FINAL ASSEMBLY
10
10
RIGHT
SEAT FRONT
9
LEFT
SEAT FRONT
12
RIGHT
SEAT BACK
11
LEFT
SEAT BACK
13
SPEAKER PANEL
7
DOOR PANEL
8
DOOR PANEL
14
INTERIOR
REAR WALL
21
SHIFTER
43
TAILLIGHT
TRANSPARENT RED
5
INTERIOR
4
SIDEVIEW MIRROR
3
SIDEVIEW MIRROR
LONG
SCREWS
REMOVE TAPE FROM
HEADLIGHTS

KIT 1950 - page 6 KIT 1950 - page 3
HEADLIGHT ASSEMBLY CONTINUED
7DASHBOARD ASSEMBLY 2
WINDSHIELD ASSEMBLY
8INTERIOR TO CHASSIS ASSEMBLY
3
BC
44
GAUGE PANEL
CLEAR 6
DASHBOARD
22
STEERING
COLUMN 23
STEERING
WHEEL
SHORT
SCREWS
45
FRONT
SIGNAL LENS
CLEAR
1
BODY
★33
TURN SIGNAL
REFLECTOR
CHROME
40
WINDSHIELD
CLEAR
6
STICKER
4
STICKER
20
CHASSIS
COMPETED
ASSEMBLY
★34
HEADLIGHT
REFLECTOR
CHROME
★35
HEADLIGHT
REFLECTOR
CHROME
2
HEADLIGHT
BUCKET

INSERT LEFT AND RIGHT SIDE HEADLIGHT COVERS INTO HEADLIGHT OPENINGS ON INSIDE OF BODY
AS SHOWN. HOLD HEADLIGHT IN PLACE WITH FINGER AND PUT A SMALL STRIP OF CLEAR TAPE ON
OUTSIDE OF BODY TO TEMPORARILY KEEP THE HEADLIGHTS IN PLACE.
KIT 1950 - page 4 KIT 1950 - page 5
WHEEL ASSEMBLY CONTINUED
6
EXHAUST ASSEMBLY
4
HEADLIGHT ASSEMBLY
7
AXLE ASSEMBLY
5
WHEEL / TIRE ASSEMBLY
6
FRONT REAR
A
SMALLER TIRE
★38
CUSTOM
OUTER WHEEL
CHROME
★37
CUSTOM
OUTER WHEEL
CHROME
★36
EXHAUST TIPS
CHROME
METAL AXLES
★30
STOCK
OUTER WHEEL
CHROME
LARGER TIRE
★31
STOCK
OUTER WHEEL
CHROME
★32
DISC BRAKES
CHROME
41
HEADLIGHT
COVER
CLEAR
(SHOWN IN PLACE)
42
HEADLIGHT
COVER
CLEAR
CLEAR TAPE
(SHOWN IN PLACE)

INSERT LEFT AND RIGHT SIDE HEADLIGHT COVERS INTO HEADLIGHT OPENINGS ON INSIDE OF BODY
AS SHOWN. HOLD HEADLIGHT IN PLACE WITH FINGER AND PUT A SMALL STRIP OF CLEAR TAPE ON
OUTSIDE OF BODY TO TEMPORARILY KEEP THE HEADLIGHTS IN PLACE.
KIT 1950 - page 4 KIT 1950 - page 5
WHEEL ASSEMBLY CONTINUED
6
EXHAUST ASSEMBLY
4
HEADLIGHT ASSEMBLY
7
AXLE ASSEMBLY
5
WHEEL / TIRE ASSEMBLY
6
FRONT REAR
A
SMALLER TIRE
★38
CUSTOM
OUTER WHEEL
CHROME
★37
CUSTOM
OUTER WHEEL
CHROME
★36
EXHAUST TIPS
CHROME
METAL AXLES
★30
STOCK
OUTER WHEEL
CHROME
LARGER TIRE
★31
STOCK
OUTER WHEEL
CHROME
★32
DISC BRAKES
CHROME
41
HEADLIGHT
COVER
CLEAR
(SHOWN IN PLACE)
42
HEADLIGHT
COVER
CLEAR
CLEAR TAPE
(SHOWN IN PLACE)

KIT 1950 - page 6 KIT 1950 - page 3
HEADLIGHT ASSEMBLY CONTINUED
7DASHBOARD ASSEMBLY 2
WINDSHIELD ASSEMBLY
8INTERIOR TO CHASSIS ASSEMBLY
3
BC
44
GAUGE PANEL
CLEAR 6
DASHBOARD
22
STEERING
COLUMN 23
STEERING
WHEEL
SHORT
SCREWS
45
FRONT
SIGNAL LENS
CLEAR
1
BODY
★33
TURN SIGNAL
REFLECTOR
CHROME
40
WINDSHIELD
CLEAR
6
STICKER
4
STICKER
20
CHASSIS
COMPETED
ASSEMBLY
★34
HEADLIGHT
REFLECTOR
CHROME
★35
HEADLIGHT
REFLECTOR
CHROME
2
HEADLIGHT
BUCKET

KIT 1950 - page 2 KIT 1950 - page 7
INTERIOR ASSEMBLY
1REAR / MIRRORS ASSEMBLY 9
AB
C
D
FINAL ASSEMBLY
10
10
RIGHT
SEAT FRONT
9
LEFT
SEAT FRONT
12
RIGHT
SEAT BACK
11
LEFT
SEAT BACK
13
SPEAKER PANEL
7
DOOR PANEL
8
DOOR PANEL
14
INTERIOR
REAR WALL
21
SHIFTER
43
TAILLIGHT
TRANSPARENT RED
5
INTERIOR
4
SIDEVIEW MIRROR
3
SIDEVIEW MIRROR
LONG
SCREWS
REMOVE TAPE FROM
HEADLIGHTS

If you have any questions or comments, call our hotline at: [phone]
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85195010200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
CORVETTE ®C6 CONVERTIBLE
STICKER PLACEMENT
11
KIT 1950 85195010200
NOTE: When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet
slightly to lift edge of sticker & use a fingernail to lift sticker from sheet. Line up sticker on body and press an edge
into place, slowly working sticker with a fingernail until sticker is fully on model.
• Studytheassemblydrawings.
• Eachplasticpartisidentifiedbyanumber.
• In the assembly drawings, some parts will be marked
by a star (★) to indicate chrome plated plastic.
• Forbetterpaintandstickeradhesion,washthe
plastic parts in a mild detergent solution. Rinse and
let air dry.
• Allowpainttodrythoroughlybeforehandlingparts.
• Anyunusedpartsmaybediscarded.
• Donotovertightenscrews
Caution:
Position all parts in this kit carefully. parts
will only snap together once.
READ THIS BEFORE YOU BEGIN LIRE CEQUI SUIT AVANT DECOMMENCER
• Etudier les schémas de montage.
• Chaque pièce en plastique est identifiée par un numéro.
• Surlesschémasdemontage,certainespiècessontmarquéesd'une
étoile (★)pourindiquerqu'ellessontenplastiquechromé.
• Pour une meilleure prise de la peinture et des autocollants, laver les
pièces en plastique avec une solution détergente peu concentrée.
Lesrinceretleslaissersécheràl'air.
• Laisser la peinture bien sécher avant de manipuler les pièces.
• Toute pièce inutilisée peut être jetée.
• Neserrezpastroplesvis.
Mise en garge:
Positionnez avec précaution toutes
les piéces de ce modéle réduit, car vous ne pouvezles
emboîter qu'uene seule fois.
The sixth generation
Chevrolet
®Convertible is
one of the best high perfor-
mance sport car bargains on
theplanet.Fromit'spowerfull
400HP V8 engine to the ultra
precision handling chassis,
the Corvette
®remains one
of the top American made-
sports cars in the world!
Your Revell model fea-
tures custom rolling wheels
with metal axles and screw-
on chassis. Easy Snaptite
assembly requires no glue or
painting. Colorful peel-and-
stickdecalsarealsoincluded.
Kit is molded in yellow, black,
transparent red and clear
plastic with chrome plated
parts and black vinyl tires.
KIT 1950 - page 8