Revo RECBP600-1 User manual

Dimensions
CAUTION
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
NOT USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
TV System NTSC PAL
Number of Pixels H768 752
V494 582
Scanning Frequency H15.734KHz 15.625KHz
59.94Hz 50Hz
V
Horizontal Resolution Color : 600 TV Lines
Image Pick-UP Device
Scanning System 2:1 Interlace
S/N Ratio (AGC Off) More Than 50dB
Min. Sensitivity 0 Lux - at F : 1.2 (30m Range)
Gamma Correction 0.45 Approx.
Gain Control Automatic
Video Output NTSC Video 1.0Vp-p/75
Lens 2.8~12mm
V
V
arifocal DC
arifocal DC Auto Iris lens
Power Source DC12V / AC24V Dual Power Voltage
Power Sonsumption Max 5Watt
Operating Temp.
Dimensions (mm) 76mm x126mm (Camera oniy)
Cable BNC / DC Jack Cable
Weight/g 1100g
Installation
Specifications
Features
secure the sun shield to the top of the camera
’
Wrench
Model Number : RECBP600-1
AC 24V / DC 12V / NTSC
REVO AMERICA
700 FREEPORT PARKWAY SUITE 100 COPPELL,
TX 75019 U.S.A TEL: [phone]-REVO(7386)
IR Bullet camera
3 DNR & Sense-up (Max256)
33pcs White IR LEDs
Externally adjustable lens
600 TV Lines of Resoution
D-WDR for clear vivid pictures where strong back-lighting occurs
Cable concealed in bracket
3 axis for both wall and ceiling mount bracket
Built in OSD
Weatherproof IP-66 Compliant
1/3” Sony Super HAD II Color CCD
L- PIN
1
2
3
4
5
SPEC CONTACT TYPE
TRIGGER_DVR
EXT_SENSOR
SENSOR_IN
ALARM_OUT
GND GND
NO
COM
NO : NORMAL
NC : MAGNETIC CONTACT ONLY
GND

1. Trigger out.
2. Ext_Sensor
3. Sensor_5V
4. Siren (Alarm out)
5. GND
1 2 3 4 5
PIR SENSOR LIGHTING CAMERA with white LED
Alarm out (Lamp, Siren)
•Built-in PIR sensor turns the white
LEDs on and trigger external devices
(Siren, Lamp) simultaneously when
motion is detected. Only during night
time.
Relay
It features
•The built-in PIR sensor turns the white LEDs
on when motion is detected at night
•Image stays in color mode even at night
•Sudden intense lighting to deter intruders
•Enforced security functions(See below diagram)
•Trigger out feature to save space on the HDD
•Energy saving
PIR sensor
Sensor input (Magnetic, PIR)
•Remote sensor activates the white
LEDs on the camera and other devices
simultaneously when an event occurs.
Only during night time
Trigger alarm out (DVR)
•PIR sensor detects motion and triggers
event recording on the DVR (day &
night time)