Revolve Electronics Rescue2200 User manual

R
escue
2200
POWER
USB INPUT: 5V DC
USB OUTPUT: 5V DC 1A
BATTERY
2200 mAh Lithium-Ion
This package includes:
- Rescue2200
- χePowerPack Battery (installed)
- USB A to USB Micro B Cable
- Velcro cable strap
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
CAUTION: Changes or modications not
expressly approved by Revolve Electronics,
Inc. for compliance with FCC rules and
regulations could void authority to operate
this equipment.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to instructions. χe-
PowerPack battery is designed exclusively
for use with Revolve Electronics products.
DO NOT USE WITH ANY OTHER PRODUCTS.
Specications How to Use the Rescue2200
The Rescue2200 has been designed
to provide reliable battery backup
power for charging USB-powered
devices on the go. No matter what
conditions you nd yourself in,
Rescue2200’s all-weather enclosure
means you will always have a ready
supply of emergency power
anywhere, anytime. Plus, all Rescue
series products are made using
Revolve’s exclusive Earth Friendly
Electronics®, oering unique features
and utilizing advanced materials and
processes that are all designed to
enhance sustainability and minimize
impact on the environment.
IMPORTANT: Conrm Rescue2200 power input and output requirements match external device(s) before making connections.
Connect to Power
1Charge External Device
Connect an external device that accepts 5V
DC power (USB standard) and requires 1A
or less to the Rescue2200’s USB power
output using USB cable.
2
Fully charge the battery by connecting
Rescue2200 input to an external USB 5V DC
power source such as an AC adapter,
computer or car charger until RED charge
light turns o. Power Source Your Device
Owner’s Manual
Rescue2200 manual s1 v1.pdf 1 3/12/2012 7:42:55 PM

The Battery Limited Warranty
1
Revolve Electronics, Inc. (“the Company”) warrants to the original purchaser that this equipment will be free from defects in
materials and workmanship for a period of 1 (one) year from the original date of purchase. If a defect exists that is covered by this
Limited Warranty, the Company will, atits sole option, (i) repair the product at no charge, using new or refurbished replacement
parts, (ii) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts
and is at least functionally equivalent to the original product, or (iii) refund the purchase price of the product. A replacement
product/part assumes the remaining warranty of the original product or ninety (90) days from the date of replacement or repair,
whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property
and the replaced item becomes the Company’s property. When a refund is given, your product becomes the Company’s property.
All warranty returns must be sent with postage and insurance prepaid.
LIMITATIONS
This Limited Warranty applies only to hardware products manufactured by or for the Company. This Limited Warranty does not
apply to any non-Company hardware products or any equipment, even if packaged or sold with Company hardware. This warranty
does not apply: (a) to damagecaused by accident, abuse, misuse, misapplication, or non-Company produc ts; (b) to damage caused
by service (including upgrades and expansions) performed by anyone other than the Company; (c) to a product or a part that has
been modied without the written permission of the Company; or (d) if any Company serial number has been removed or defaced.
Responsibility is limited to the actual cost of the item. Company shall not be liable in any way for damages resulting from use,
intended or unintended,or misuse of this product inconjunctionwithanydeviceor accessory other than an appropriate equipment
or devices as described in the product manual. Company will not be responsible for expenses or inconveniences, or consequential
damagesoccasioned by equipment, or by breach of any expressed or implied warranty with respect thereto. Implied warranties on
this item shall be in eect only for duration of the expressed warranty set forth above and after the expiration of such expresses
warranty there shall be no warranties, expressed or implied (including merchantability) on the product.
Cable Strap
To obtain service for your
Rescue2200, contact the
Revolve Electronics Support
department either online
at www.revolveUSA.com or
by sending an email
[email protected].
Replacing the Battery
The χePowerPack is an advanced
lithium-ion battery designed for
years of service. To obtain a
replacement battery and participate
in our hassle-free battery recycling
program, contact product support
at www.revolveusa.com or by
calling us toll-free at [phone].
CAUTION: The Rescue2200 is designed to
work exclusively with Revolve’s
χePowerPack, which is included in this
package. Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries as instructed in this manual.
2
Removing the BatteryChecking Battery Status
To determine the amount of
energy stored in the χePower-
Pack, press the Battery Status
Button.
Green, yellow & red lights = fully charged;
yellow and red lights = medium charge;
red light only = low charge, recharge now!
To install the cable strap for
storing your USB cables, insert
one end of the strap into the slot,
slide it under the rubber cover,
and thread back up through the
opposite slot.
Carefully remove the
rubber cover.
3
Insert pin or paper clip into
hole.
Slide battery cover o and
remove battery.
Revolve Electronics, Inc.
230 South Olive St.
Ventura, CA 93001
Phone [phone]
Fax [phone]
©2011 Revolve Electronics, Inc.
All Rights Reserved.