PESARO FLOOR LAMP
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
This xture has been rated for one (1) 100-Watt max Type A standard
lightbulb (not included), 23-Watt compact uorescent lightbulb
(not included), or one (1) 9-Watt SBLED lightbulb (8.8-Watt SBLED
lightbulb included). To avoid the risk of re, do not exceed the
recommended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS PRODUCT IS NOT A TOY AND HAS NO
PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
ASSEMBLY & INSTALLATION
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Insert LED Bulb (D) into the threaded socket.
3. Insert Harp (B) into Harp Saddle (C).
4. Unscrew Finial (A) from Harp (B) and place the shade (not
included) over Harp (B).
5. Attach Finial (A) and tighten to secure the shade.
6. Plug into proper electrical outlet and test the xture.
7. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the lamp. Wipe clean with a soft,
dry cloth.
