RH LUCIEN PARCHMENT CURVED MIRROR Programming manual

LUCIEN PARCHMENT CURVED MIRROR
ASSEMBLY & INSTALLATION INSTRUCTIONS
ENGLISH

LUCIEN PARCHMENT CURVED MIRROR ENGLISH
RH.COM
REVISION 04/23/22
LUCIEN PARCHMENT CURVED MIRROR
PARTS INCLUDED
Mirror
(1) Wall Anchors (12)
(2) Screws (12)
(3) Wall Bracket (2)
(4) Level (1)
(1)
(2)
(3)
(4)

LUCIEN PARCHMENT CURVED MIRROR ENGLISH
RH.COM
REVISION 04/23/22
IMPORTANT SAFETY INSTRUCTIONS
1. These instructions are provided for your safety. It is important that
they are read carefully and completely before installation of fixture.
2. Professional installation is strongly recommended.
3. For your safety, it is recommended that two people hang the fixture.
4. Check with a professional to ensure your wall can tolerate the
product weight.
5. It is imperative that the mirror is mounted into a wall stud.
ASSEMBLY INSTRUCTIONS
1. Carefully remove mirror from box.
2. Determine final placement of mirror on wall. Place the wall bracket
(3) on the desired location, and mark the hole openings on the wall
with a pencil. Be sure to confirm precise distance and levelness
between holes for accurate hanging.
3. Drill small pilot holes into the wall at the marked locations, and insert
wall anchors (1) until flush with the wall. Do not insert wall anchors
into any studs.
4. Place the wall bracket (3) over wall anchors and screw wall screws
(2) through the wall bracket and into anchors. Screw wall screws
through bracket and directly into any wall anchors.
5. To mount mirror, slide back panel bracket (5) onto the wall bracket (3).
6. Installation is complete.
7. This Mirror can mount both Horizontally & Vertically on Wall Bracket
CARE INSTRUCTIONS
1. To clean, use a soft, dry cloth only.
2. Do not use abrasive cleansers.
FRONT VIEW
SIDE VIEW
BACK VIEW
Mirror
Wall
5
5