Rice Lake Digi DI-10 User manual

73354
DI-10
OO
OOpp ppee eerr rraa aatt ttiiii oo oonn nn MM MMaa aann nnuu uuaa aallll
When Accuracy Counts
CC
CChh hhee eecc cckk kk WW WWee eeiiii gg gghh hhiiii nn nngg gg SS SScc ccaa aallll ee ee
All manuals and user guides at all-guides.com
all-guides.com

1
DI-10 OPERATION MANUAL
SECTION CONTENTS PAGE NUMBER
1.0. GENERAL 2-5
1.1. DESCRIPTION 2
1.2. APPEARANCE 3
1.3.DISPLAY & KEYS 4
1.4. INDICATOR LAMPS 5
2.0. INSTALLATION 6-9
2.1. UNPACKING 6
2.2. INSPECTING 6
2.3. REPACKAGING 6
2.4. UNLOCKING (DIGI GRAND) 6-8
2.5. DI-10 POLE ASSEMBLY 9
3.0. SPECIFICATIONS 10-15
3.1. CAPACITIES 10
3.2. TECHNICAL 11
3.3. SET-UP PROCEDURE 12-13
3.4. FEATURES 14-15
4.0. OPERATION INSTRUCTION. 16-24
4.1. POWER ON 16
4.2. ONE TOUCH TARE 17
4.3. DIGITAL TARE 18
4.4. DIGITAL TARE WHILE WEIGHING 19
4.5. SET POINTS 20-21
4.6. ADDITION AND SUBTRACTION 22
4.7. COUNTING. 23
4.8. NET/GROSS DISPLAY 23
4.9. DATE & TIME SETTING 24
4.10. LB/KG CONVERSION 24
5.0. DI-10 OPTIONAL EQUIPMENT 25-30
5.1. PRINTER 25
5.2. SETPOINT OUTPUT. 26-27
5.3. RS-232C DATA OUT 28-30
5.4. AC/DC ADAPTOR. 30
6.0. MAINTENANCE, CALIBRATION, TEST PROCEDURE & SERVICE 31-39
6.1. MAINTENANCE PROCEDURES 31-32
6.2. SERVICE & REPAIR 32
6.3. PLATFORM WIRING 32
6.4. ERROR MESSAGE LIST 33
6.5. SPEC. LIST 34-36
6.6. CALIBRATION 37-38
NOTES: 39
All manuals and user guides at all-guides.com

2
DI-10 OPERATING MANUAL
1.0. GENERAL
1.1. DESCRIPTION
The DI-10 Indicator offers a practical solution to a wide range of weighing applications.
There are a variety of weight capacities and increments available. The display resolution
is selectable from 1/3000 to 1/10000. It features keyboard calibration with auto-span.
Operates on 6 “C” cell batteries or with its AC/DC adapter. The DI-10 is able to support
single load cells that have an output range of 0.4mV/V to 4.0mV/V. The DI-10 is able to
support up to 4 load cells when used with the AC/DC adapter. This indicator features
LCD graphic display, 5 weighing modes, optional devices such as RS-232, Set Point
Output, and a built in Printer. For a list of platforms sizes and available above mentioned
capacities see page 2.
This instruction manual will provide the user with all the information necessary to
understand, set-up and operate the DI-10 scale. Included in this manual are descriptions,
specifications, drawings, and operating instructions.
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com
all-guides.com

6
2.0. INSTALLATION
This section provides the information required for installation of the DI-10 weight indicator.
The following steps accomplish installation.
1. Unpacking
2. Set-up Procedure
2.1. Unpacking
Each component of the DI-10 is packed in a specially designed carton. Remove each
component from its carton, separate the component from its polystyrene shell assembly
and set aside. Inspect the carton interior to be sure that all accessories have been
removed from the carton. Inspect the carton inner panels for accessories.
NOTE: Be sure to repack all materials within the carton set. Store the cartons in a
secure area so they can be available whenever shipment of the scale is required.
2.2. Inspection
Immediately after unpacking, a visual inspection of the instrument should be performed.
If any damage has been incurred during transportation the shipper and DIGI MATEX
INC. should be notified immediately. Instructions for assessment of damage and further
procedures will then be determined.
2.3. Repackaging
If, at anytime, the DI-10 weight indicator must be returned for modification, calibration,
or repair, be sure that it is properly packed with sufficient cushioning materials.
Whenever possible, the original carton assembly should be retained for this purpose.
Any damage caused by improper packaging will not be covered by warranty.
2.4. Platform Unlocking Procedure
The unlocking procedure is different for each style of platform and are included on
the following pages.
2.5. Digi Grand Pole Assembly
The optional pole mounting kit comes with all the necessary hardware and assembly
is easy. See page 9 for details.
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

10
3.0. SPECIFICATION
3.1. PLATFORMS
The following is a list of platforms :
Model Platform
Size/Platter
Capacities
S-AL bench 12” x 14” x3” 1 LB. 5 LB. 10 LB. 25 LB. 50 LB.
S-SL bench / floor 13” x 17” 60 LB. 150 LB. 300 LB.
S-TL floor 17” x 21” 150 LB. 300 LB. 500 LB. 1000 LB.
S-UL floor 24” x 28” 150 LB. 300 LB. 500 LB. 1000 LB.
S-PL floor 30” x 30”
36” x 36”
1000 lb. to 3000 lb.
S-PL floor 48” x 48”
48” x 72”
60” x 60”
60” x 84”
2500 lb.
to
25000 lb.
Ramps , Other Capacities And Stainless Steel Platforms Also Available
Choosing A Capacity : Multiply the Decimal Location by the Minimum Weight by the Display
Resolution (=) Capacity
Decimal
Location
Minimum
Weight
Display
Resolution
Available
Capacities
0.0000 1 1 / 2000 1lb,2.5lb,3lb.,5lb.,6lb,.
0.000 2 1 / 2500 10lb.,25lb.,30lb.,50lb.,
0.00 5 1 / 3000 60lb.,75lb.,100lb.,125lb
0.0 10 1 / 5000 150lb.,200lb.,250lb.,
0 20 1 / 6000 300lb.,375lb.,500lb.,
50 1 / 7500 600lb.,750lb.,1000lb.,
100 1/10000 1500lb.,2000lb.,2500lb.
200 1/12500 3000lb.,3750lb.,5000lb.
500 1/15000 6000lb.,7500lb.,10000lb
Example: dec. loc. ‘TIMES’ min. wt. ‘TIMES’ disp. res. = avail cap.
0.00 ‘TIMES’ 5 ‘TIMES’ 1 / 7500 = 375. 00 lb.
* Units can be programmed to primarily weigh in lb., oz., kg., g., or dwt.
All manuals and user guides at all-guides.com
all-guides.com

11
3.2. TECHNICAL (MODEL SPEC)
* Power source * D.C 12V 0.5A (AC/DC adaptor)
* D.C 1.5V x 6 pcs. (“C” cell)
(“C” cell can't operate printer)
* Operating temperature * -10 ... +40EC
* Operating humidity * 15 ... 85% RH.(Non-condensing)
* Power consumption * 1 w/h.
ANALOG SPEC. (DI-10)
* Input sensitivity * 0.25 :V/div. to 20 :V/div.
* Zero adj. range * 1 mV
* Temp. characteristic * ZERO"(0.2:V " 6ppm of ZERO)/EC
SPAN ..." 6 ppm/EC
* Speed of A/D conversion: * 10 times/sec.
* Non linearity * 0.016 % of F.S or less
* L/C to be used * 0.4 mV/V to 4 mV/V
* L/C excitation voltage * DC 5V.
* Number of the scale * 1 (one) scale
* Display resolution * up to 1/10000
DISPLAY SPEC.
* Display * 6 digits.
* Tare * 6 digits
* Setpoint 1 (LO) * 6 digits.
* Setpoint 2 (OK) * 6 digits.
* Setpoint 3 (HI) * 6 digits
* Weighing unit * 5 kinds "g","kg","lbs","oz","dwt".
* Counting unit * 1 kind "pcs"
* Sign lamps * 9 kinds "ZERO","TARE","NET","GROSS
"BATT","W.S","HI","OK","LO".
* Filling graphic * 2 kinds rough and fine
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

14
3.4. FEATURES
1. Super Large LCD And
Dynamic Filling In Graphic
Display.
* 25.4 mm figure height.
* 2 kinds of filling in graphic, rough and fine.(selectable)
* 9 kinds of weighing sign and 5 kinds of weighing unit.
2. Battery Drive Available. * D.C 1.5 V x 6 pcs.(AM-2)
* In The Case Of Battery Drive, Printer Option And 4 Load
Cell Construction Scale Is Not Available
* Alkaline cell is better than another material.
3. Automatic Power
Off.(Selectable Time Off)
* To save power specially in the case of battery drive,
automatic power off function is provided
4. Up To 4 - 350ΩLoad Cells
Can Be Driven with a (DI-10)
* This is available only in the case AC/DC adaptor is used as
power supply. (Only One Load Cell Can Be Driven In The
Case Of Battery Operation.)
* DIGI's S-S,S-T,S-U are recommendable as external scale.
5. Five Kinds Of Weighing
Mode.(Selectable)
* In "kg","g","lbs","oz" or "dwt" mode.
6. Weighing
Conversion.(Selectable)
* "kg" to "lb." and vise-versa. (1 lb = 0.45359 kg,
1 kg = 2.2046 lb. )
* "g" to "oz" or "dwt" and vise-versa. (1 g = 0.03527 oz,
1 oz = 20 dwt.)
7. Three Kinds Of Taring
Method.(Selectable)
* One touch tare, Digital tare, Digital tare during weighing.
8. Addition & Subtraction. * Max. 6 digits and an alarm sign "Add OFF" and "SUb OFF"
are provided when they exceed the limit.
9. NET/GROSS Conversion. * Individual indicator for NET and GROSS.
10. Automatic Zero Tracking. * To eliminate small weight display drifting.
11. Automatic Print.(Selectable) * To print out weighing result automatically
12. Automatic Calibration.
13. Data Output By RS-232C For
External Device. (Option)
* For data transfer to external device
All manuals and user guides at all-guides.com

15
FEATURES (continued)
14. Setpoint Data Output.
(Option)
* To drive external device.
15. Built In Printer. (Option) * To print out weighing result.
In The Case Of Battery Drive, Printer Option Is Not Available
16. Code No. Printing. * To specify the printed out weighing result.
17. Date & Time Printing. * To specify the printed out weighing result.
* Built in clock.(no back up after power disconnect)
18. Counting Function. * For parts counting operation.
* Print out, addition and subtraction are not possible.
19. Programmable Scale Capacity
And Scale Interval.
* Minimum graduation (increment),1,2,5,10,20 and 50 are
available.
* Display resolution up to 1/10.000 is available.
20. Meets Or Exceeds The
Requirements Of OIML Class 3
1/3000 display resolution.
21. Articulated Head Mount for
Pole Mount
*At an angle of 80 °.
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com