Richmond GTR198 User manual

GTR198 Gate Warning light user manual
I. Safety Instruction
1. For security, please read the user manual carefully before initial operation;
2. Please be sure the power is off before connecting, the product is produced without fuse;
3. This product is only used for the equipment which will not cause life or property hazards when a
breakdown happens or its security risks have been already eliminated
II. Technical Specification
1. Working voltage：85-265VAC or 12-24VAC/DC
2. Loading capacity：<5W
3. Flicker Frequency：1HZ
4. Working temperature：-20º～+60℃
5. IP Level: IP54
6． Size：φ90* 125mm
7． Weight：159g
III. Connecting Instruction
1. Connect the wire with J1 if power supply is 85-265VAC
2. Connect the wire with J2 if power supply is 12-24VAC/DC
3. J3 is for connecting the antenna to extend the effective distance of controller
Note：1. Connect J1 or J2, can’t connect both 2. J3 should be connected with shielding line
IV. Instructions
4.1 LED will flicker in 1HZ after power on
4.2 JP2 switch
It’s the switch for switching LED in flickering or lighting,
When JP2 at FLASH, LED will flicker in 1Hz after power on;
When JP2 at NO FLASH, LED will light after power on
V. Installation
No
Name
Quantity
①
Seal ring
1
②
Lamp cover
1
③
PCB
1
④
Pedestal
1
⑤
PA3*12
2
⑥
PA2.3*8
2

A
B
C
D
E
F
G
H
I
J
K