Ricoh Aficio MP 5500 S/P User manual

How to change the default File Type in Scanner Mode
Details
How do I change the default File Type in Scanner Mode?
Answer
1. Press the [Scanner] mode key on the left side of the Operation Panel.
2. Select [File Name/Type]
3. Select the File Type you want to be the default file type [Single Page] or [Multi Page] TIFF/JPEG, PDF, or TIFF
4. Press [OK]
Note:The following settings can also be registered as defaults: Scan Settings, 1 Sided /2 Sided
Original, Top to Top/Top to Bottom, skip scanning back side of the last page, Divide, Original Orientation, Batch /
SADF, Stamp, Store File, Preview, and Reception Notice.
5. Press the [Program] key
6. Press [Program as Defaults]
7. Press [Program]

8. Press [Yes]
9. Press [Simplified Display] key and repeat steps 1 - 8 if you want the Simplified Display Mode to have the same
defaults.
Products
US
Ricoh
Black & White Multifunction
Aficio MP 5500, 6500, 7500
Color Multifunction
Aficio MP C3500, C4500
Aficio MP C2000, C2500, C3000
Savin
Black & White Multifunction
8055, 8065, 8075
Color Multifunction
C2020, C2525, C3030
C3535, C4540
Gestetner
Black & White Multifunction
DSm755, DSm765, DSm775
Color Multifunction
DSc520, DSc525, DSc530
DSc535, DSc545
Lanier
Black & White Multifunction
LD255, LD265, LD275
Color Multifunction
LD420c, LD425c, LD430c
LD435c, LD445c
Category
How to
Programming/Operation
User Programming
Scan
Scanning Features/Operation