RIDGE RYDER TPS-105-10 User manual

PLU:520662 CODE:TPS-105-10
10W portABLE
SOLAR CHARGER KIT

WARNING!
• Follow the below instructions carefully to not cause any bodily harm.
• Correct polarity must be observed for product to function properly and safely.
• Risk of fire, electric shock, and injury to persons if operating instructions are
not followed.
• Follow all safety instructions provided by the battery manufacturer when
handling 12V batteries.
• Always wear safety glasses. Keep sparks, flames and cigarettes away from
batteries at all times.
KEY FEATURES:
• High efficiency mono crystalline solar cells.
• Quickly connects and disconnects to the battery.
• Reverse polarity protection
.
• Low maintenance , lightweight compact design.
* Support bracket
12V Battery
(not Included)
Solar Charger Kit
For optimal power, ensure the panel is directly facing the sunlight.
1. On the Solar Panel, connect (+) red positive clamp to positive battery terminal.
2. Connect (-) negative clamp to (-) negative battery terminal
Serial NO. Description of parts Quantity
1
1 SET
10 mono crystalline solar charger with 2
meter connecting cable, battery clamps and
support bracket.
INSTALLATION GUIDE:
:

FAQ:
1. What type of batteries can my Solar Charger Kit charge?
A. Any rechargeable 12V battery such as those commonly found in cars,
boats and RVs.
SPECIFICATIONS:
Part Number TPS-105-10
Construction
Max Power(NOM.)
Mono Crystalline Solar Cells
Net Weight
10W
Dimensions 275X310X28mm
1.40kg
Max Power Voltage
Max Power Current
Open Circuit Voltage
Short Circuit Current
Power Tolerance
Cable Length
Operating Temperature
Standard Test Conditions
Manufactured in
17.50V
0.57A
21.50V
0.65A
±3%
2 Meter
-40° To+85℃
AM1.5 1000W/m² 25°C
China
A. Yes. There is a built-in diode to prevent reverse polarity as well as
over charge.
2. Is the Solar Charger Kit Reverse Polarity Protected?
3. Is my Solar Charger Kit Waterproof?
A. It is recommended that the kit is not exposed to excessive water
4. How do I clean the Solar Charger Kit?
A. Dust & dirt should first be swept off the panel surface using a soft
brush then using a wet cloth to wipe the panel surface to remove
remaining & grime. It is recommended that any bird droppings be
removed as soon as possible to avoid surface damage.