Riello Sentinel Dual SDH 2200 ER User manual

Sentinel
Dual
Low Power
1-3 kVA
1:1
ONLINE
VFI
TYPE
EMERGENCY
E-MEDICALDATACENTERSOHO
INDUSTRY TRANSPORT
USB
plug
Plug & Play
installation
Hot swap
battery
Energy
share
6
HIGHLIGHTS
• Simpliedinstallation
• Installation versatility
• Reducedrunningcosts
• Runtimeexpandability
• Low noise level
Sentinel Dual is the new range of high
density double conversion online UPS,
suitable for powering a wide range of
devices such as servers, storage systems,
telephony - VoIP equipment, network
and medical systems as well as industrial
applications.
It is also ideal for powering and protecting
Blade Server systems with high input power
factor. At only 2U, Sentinel Dual is ideal for
19” rack cabinet installations.
Sentinel Dual has a practical, modern
design and includes several performance
advantages over traditional on-line UPS. All
developed by the Riello UPS research and
development team.
The newly-designed inverter is one of the best
energy conversion systems on the market, with
a 0.9 output power factor and 92% operating
eciency in on-line mode.
For business continuity applications
requiring long battery runtimes, battery
autonomy can be extended up to several
hours using ER models tted with more
powerful battery chargers.
With energy savings in mind, Sentinel
Dual is also tted with a shut-o button to
reduce energy consumption to zero during
prolonged periods of inactivity.

90°
90°
1. REMOVE THE DISPLAY PANEL 2. ROTATE THE DISPLAY PANEL AND INSERT IT
INTO POSITION
3. ROTATE THE UPS BY 90º 4. ATTACH THE RACK SUPPORTS
Simpliedinstallation
• Sentinel Dual can be installed as a tower
or in 19” rack cabinets, by simply removing
and rotating the display panel
• Low noise (<40 dBA): can be installed
in any environment thanks to its high
frequency switching inverter and PWM
load-dependent digitally controlled fan.
• Operation guaranteed up to 40°C (the
components are designed for high
temperatures and are thus subject to less
stress at normal temperatures)
• On Sentinel Dual models, the output
sockets can be programmed to disconnect
less critical loads during blackouts
(EnergyShare function).
Installation versatility
Sentinel Dual can be used in a tower or rack
format, by simply turning the display and
adding the supplied handles or optional
runners.
Reducedrunningcosts
The UPS is highly exible and easy to
congure. Programmable functions can
be set via software or manually via the
front display panel. Sentinel Dual can
be congured in the following operating
modes:
• On Line, maximum load protection and
output voltage waveform quality
• ECOMode, to increase eciency (up
to to 98%); allows you to select Line
Interactive technology
• SmartActive, the UPS automatically
decides the operating mode based on the
mains power quality
• Emergency, the UPS can be selected to
function only when the mains power
supply fails (emergency only mode)
• Frequencyconverter operation (50 or 60
Hz).
Advancedcommunications
Sentinel Dual oers maximum exibility for
integration with all types of communication
systems.
• Multi-platform communication for
all operating systems and network
environments: PowerShield3supervision
and shutdown software for Windows
operating systems 8, 7, 2008, Vista, 2003,
XP, Linux, Mac OS X, Sun Solaris, VMware
ESX and other Unix operating systems.
• UPS Tools conguration and customisation
software supplied as standard
• RS232 serial port and opto-isolated
contacts
• USB port
• Slot for communications boards such as
Modbus/Jbus, TCP/IP-SNMP and relay
contacts.
Emergencyfunction
This conguration ensures the operation of
emergency systems that must be supplied
in the event of a mains power failure, such
as emergency lighting, re detection/
extinguishing systems and alarms.
When the mains power supply fails, the
inverter begins powering the loads with a
progressive start-up (Soft Start) in order to
prevent overload.
Sentinel Dual is compliant for installation
in medium-voltage transformer rooms in
accordance with applicable legislation, for
the power supply with reserve charge of
medium-voltage coils.
High quality output
voltage
• Even with non-linear loads (IT loads with a
crest factor of up to 3:1)
• High short circuit current on bypass
• High overload capacity: 150% by inverter
(even with mains failure)
• Filtered, stabilised and reliable voltage
(On-line double conversion technology
(VFI compliant with EN62040-2 class
C2) with lters for the suppression of
atmospheric disturbances
• Power factor correction: UPS input power
factor close to 1 and sinusoidal current
uptake.
Highbatteryreliability
• Automatic and manual battery test
• Batteries are user replaceable without
switching o equipment and without
interruption to the load (Hot Swap)
• Unlimited extendible runtime using
matching battery boxes.
Low noise level
Thanks to the use of high frequency
components and load-based fan speed
control,
the noise produced by the UPS is less than
40 dB.
Otherfeatures
• Output voltage can be selected via
software (220-230-240 V)
• Auto-restart when mains power is restored
(programmable via software)
• Stand-by on bypass: when the machine
is switched o, it automatically goes into
bypass and battery charge mode
• Minimum load switch-o
• Battery discharge warning
• Start-up delay
• Total microprocessor control
• Automatic bypass without interruption
• Status, measurements and alarms
available on standard backlit display
• UPS rmware updating via PC
• Input protection via resettable thermal
switch (versions up to
1500VA)
• Back-feed protection standard: to prevent
energy from being fed back to the network
• Manual switching to bypass.
2-YEAR WARRANTY

SDH 1500SDH 1000
BB
SDH 2200/2200ER
3000/3000 ER
450
87
425
BB
450
87
625
BB
INPUT THERMAL
PROTECTION
INPUT SOCKET
OUTPUT SOCKETS
USB PORT
RS232 SERIAL
BATTERY
EXPANSION
SOCKET
INPUT PLUG
EMERGENCY SWITCH
DEVICE (ESD)
DETAILS
OPTIONS
BATTERY BOX
MODELS BBSDH36-A3/BBSDH36-M1 BBSDH72-A3/BBSDH72-M1
Dimensions
(mm)
SOfTWARE
PowerShield3
PowerNetGuard
ACCESSORIES
NETMAN 101 PLUS
NETMAN 102 PLUS
NETMAN 202 PLUS
MULTICOM 301
MULTICOM 302
MULTICOM 351
MULTICOM 352
MULTICOM 372
MULTICOM 382
MULTICOM 401
MULTI I/O
Interface kit AS400
MULTIPANEL
RTG 100
Manual Bypass
16 A
Manual Bypass 16 A Rack
Automatic Bypass 16 A
Automatic Bypass 16 A Rack
PRODUCT ACCESSORIES
Universal rails for installation in rack
cabinets

RPS SpA - Riello Power Solutions - Member of the Riello Elettronica Group
Viale Europa, 7 - 37045 Legnago (Verona) - ITALY
Tel: [phone] - Fax: [phone]
www.riello-ups.com
[email protected]
Follow us on Social Networks
DATSDHA1Y13CREN
MODELS SDH 1000 SDH 1500 SDH 2200 SDH 2200 ER SDH 3000 SDH 3000 ER
POWER 1000 VA/900 W 1500 VA/1350 W 2200VA/1980 W 2200VA/1760 W 3000 VA/2700 W 3000 VA/2400 W
INPUT
Nominal voltage 220-230-240 Vac
Voltage range without battery
intervention 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD
Maximum permitted voltage 300 V
Nominal frequency 50/60 Hz ±5Hz
Frequency range 50 Hz ± 5% / 60 Hz ± 5%
Power factor > 0.98
Current distortion ≤7%
BYPASS
Voltage tolerance 200 - 253 Vac
Frequency tolerance Frequency selected (from ±0.5Hz to ±5Hz congurable)
OUTPUT
Voltage distortion with linear
load / with non-linear load < 2%
Frequency Selectable: 50 Hz or 60 Hz or self-learning
Static variation ± 1%
Dynamic variation ≤ 5% in 20 msec.
Waveform Sinusoidal
Current crest factor 3 : 1
Efficiency
ECO and Smart Active Modes 98%
BATTERIES
Type VRLA AGM maintenance-free lead based
Recharge time 2-4 hours
OVERLOAD TIMES
100% < Load < 110% 1 minute
110% < Load < 150% 4 seconds
Load > 150% 0.5 seconds
OTHER fEATURES
Net weight (kg) 17.5 18 30.5 15 31 15
Gross weight (kg) 21 21.5 35 19.5 35.5 19.5
Dimensions (WxDxH) (mm)
(T- 87 x 425 x 450) (R- 19” x 425 x 2U) (T- 87 x 625 x 450) (R- 19” x 625 x 2U)
Packaged dimensions (WxDxH)
(mm) 550 x 600 x 245 600 x 760 x 245
Protection against
overvoltages 300 joules
Protections Overcurrent - short-circuit - overvoltage - undervoltage - temperature - excessive low battery
Communications USB / DB9 with RS232 and contacts / Slot for communications interface
Input plugs 1 IEC 320 C14 1 IEC 320 C20
Output sockets 8 IEC 320 C13 8 IEC 320 C13 + 1 IEC 320 C19
Standards Safety: EN 62040-1 and Directive 2006/95/EL; EMC: EN 620040-2 category C2 and Directives 2004/108/EL
Operating temperature 0 °C / +40 °C
Relative humidity < 95% non-condensing
Colour Black
Noise level at 1 m < 40 dBA
Standard equipment provided Power cable, serial cable, USB cable, safety manual, quick start guide