ring Power Pack User manual

User Guide
P owe r Pack
&[ill

Ring Power Pack
The first time you use your Ring PowerPack,
you need to plug it directly into an electrical
outlet to charge it.
Note:The PowerPack does not come with its
own power adapter. Use the Alarm Pro USB-C
power adapter.
2

Installation instructions
1. Plug the power adapter from your Ring Alarm Pro into the Power Pack's
orange Power In port.
2. Wait a few seconds for the Power Pack LED light to turn green.
Solid green meansit'scharging.When it'sfully charged, the LED turns off.
3. Connect the PowerPack to your Alarm Pro using the short
1
double-sided
USB-C cable. Match the blue and orange connector ends to the correct
Power In (orange) and Power Out (blue) ports. The Power Pack will finish
charging while it's connected to your Alarm Pro.
You can check on the Power Pack battery status using the Ring app.
Tap on the Alarm Pro Base Station device page, then tap on the
Battery Health tile to see all connected Power Packs.
Powers eero wifi 6 Extenders
You can use these same steps to add a Ring Power
Pack to an eero wifi 6 Extender (sold separately).
3

Battery backup
Link multiple Power Packs to your Alarm Pro for
extended battery backup during a power outage.
111111111111111111111111111111111111111111111
I
Need more information? Visit ring . com / alarm-pro
To download this manual,visit ring.com /alarm-manual
2021 Ring LLC or its affiliates.
Ring and all related marksare trademarks of Ring LLC or itsaffiliates.
22·003417

Important Product Information

IMPORTANT PR O DUCT INFORMATION
SAFETY INFORMATION
Use R esponsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THE SE SAFETY INSTRUCTIONS COULD RESULT IN FIRE , ELECTRIC SH O CK , OR OTHER INJURY OR DAMAGE.
WARNING :Ring Power Pack issuitable for use w ith Ring Alarm Pro (sol d separately) or an ee ro 6W i-Fi extender (sold separately) only. Th e Ring Power
Pac k is designed to be charged w it heither the Ring Alarm Pro Power Adaptor, or an eero 6 Extender Powe r Adaptor. Other charge methods should not
be used an d are not supported.
Do not expose y ou r devic eor adapter to liquids. If your device oradapter gets wet, carefully unplug all cables withoutgetting your hands wet and wait for the
device and adapter to dry completely before plugging them in again. Do not attemptto dryyour device oradapter with an external heat source, such as a
microwave oven ora hair dryer. If the device or adap t er appear damaged, discontinue use immediately. Use only accessories supplied with the device to power
your device. To avoid risk of electric shock, donot touch your device or any wires connected to your device during alightning storm.
Your Ring Power Pack may get hotduring normal use. To reduce the effect of the warming, place your Ring Power Pack on a heat resistant surface. If you find
the device has become hot to the touch, unplug power and let it cool down for a few minu t es before handling.
& BATTERY SAFETY
HANDLE WITH CARE. Your device contains a rechargeable lithium-ion battery and should be replaced only by aqualified service provider. Do not disassemble,
open, crush, bend, deform, puncture, shred orattempt to access the battery in your device. Do not modifyor remanufacture the battery, attempt to insert foreign
objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it
is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic
conductive objects to come into con t act with battery terminals. Avoid dropping t he device or battery. If the device or battery is dropped, especially on a hard
surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.
Maintaining Your Ring Power Pack
Use ofthird-party accessories may impactyour devices' performance. In limited circumstances, use of third party accessories may void your devices' limited
warranty. In addition, use ofincompatible third-party accessories may lead to damage to device or the accessory. Read all safety instructions for any accessories
before using with your Ring Power Pack.
Other Safety Considerations
Your device Is shi p ped with a special USB-C cable interconnection cable. This cable is designed only to be used between a Ring Power Pack and Ring Alarm Pro
or Ring Power Pack and eero 6 Exte n der. Do not use for any other purpose. If the USB-C connector or cable appear damaged, discontinue use immediately.
Replacement USB-C interconnection cables are available from ring. com .
PRODUCT SPECIFICATIONS
Device Name : Ring Power Pack
Model Number : SC28S2
Electrical Rating: 12V DC, 3A
Temp erature Rating : 32°F to 104°F (0"C to 40°C)
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and
regulations. For information about recycling your device, go to amazon . com /devicesupport.

TERMS OF SERVICE
By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms. For information on our warranty and Ring Protect Plans,
visitring .c om /l egal.
LIMITED WARRANTY
Your new or Certified Refurbished Ring alarm device is covered by a one-year Limited Warranty. Details are available at ring. com / warranty .
ADDITIONAL INFORMATION
You can find the Terms of Use, Limited Warranty, instructions for using the device, Customer Service contact information, and other applicable terms and
device information at Ring .com .
Supplier 's Declaration of Conformity- Compliance Information Statement
Unique Identifier: Ring Power Pack
Model Number: 5C28S2
Responsible Party and Party issuing Supplier's Declaration of Conformity:
Ring LLC, 1523 26th Street, Santa Mon ic a, CA 90404 U.SA
www.ring.com/ [email protected]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) Th is device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES 3(B)/ NMB -3(8)
c@us LISTED
I.T.E. E364109

Ri ng LLC 1523 26th St. SantaMonica,CA90404
02021 Ring LLC or its affiliates.Ring and all related
marksaretrademarks of Ring LLC or itsaffiliates.
22-003418