Rinnai RB-63SSV-DL User manual

Operation / Installation Manual
Built-In Hob
RB-63SSV-DL (LPG) RB-63SSV-DL (TG)
RB-63SSV-DR (LPG) RB-63SSV-DR (TG)
RB-64SSV-D (LPG) RB-64SSV-D (TG)
RB-63SSV-AL (LPG) RB-63SSV-AL (TG)
RB-63SSV-AR (LPG) RB-63SSV-AR (TG)
RB-64SSV-A (LPG) RB-64SSV-A (TG)
Rinnai Corporation

Content
Guide to Appliances RB-64SSV-D & RB-64SSV-A 1
Guide to Appliances RB-633V-DL & RB-633V-AL 2
Guide to Appliances RB-633V-DR & RB-633V-AR 3
Guide to the Appliances 4
Specification 5
Safety Instructions 6
Using for the first time 9
Installation Guide 10
Operation 16
Suitable Pans 19
Cleaning and Care 20
Trouble Shooting 24
Rinnai Customer Care Centers 25

1
Guide to the Appliances
RB–64SSV-D / RB-64SSV-A
S Burner
S Burner
M Burner
ES Burner
Front Left
Control
Front Right
Control
Rear Left
Control
Rear Right
Control

2
Guide to the Appliances
RB–633V-DL / RB-633V-AL
S Burner
ES Burner
B Burner
Left Control
Rear Right
Control
Front Right
Control

3
Guide to the Appliances
RB–633V-DR / RB-633V-AR
B Burner
S Burner
Front Left
Control
Rear Left
Control
Right Control
ES Burner

4
Guide to the Appliances
Burner Assembly
M, S, ES Burner B Burner
Safety Cut Off System
1Simmer cap
2 Burner base
3 Ignitor
4
Thermocouple
5 Burner he
ad
6
Burner Ring
1Burner cap
2 Burner base
3 Ignitor
4 Thermocouple
5 Burner head
Thermocouple
Ignitor
Your hob comes with a safety device
(thermocouple) that prevents the flow of
gas
to the burners if the flames were to
suddenly go off
.
To use the burner again, turn the control
clockwise to the
"o" position, and then
switch it back on
as normal.
The safety cut-
out operates ind
ependently from the
electricity
supply
To ensure that this device is active, switch
on the burner as usual and, without
releasing the control, press and
hold it
down firmly for 5
seconds after lighting the
flame.

5
Specification (LPG)
Rinnai
Model No.
DC
RB-63SSV-DL
RB-63SSV-DR
RB-64SSV-D
AC
RB-63SSV-AL
RB-63SSV-AR
RB-64SSV-A
Cut-out Size(mm)
555×475 4-R20
555×475 4-R20
555×475 4-R20
Product Size(mm)
580×510×120
580×510×120
580×510×120
Rating (kW)
LPG
Left: 4.5
Right: 4.5
Rear Left : 2.2
Rear Right: 1.8
Rear Left : 1.8
Front Left: 1.2
Front Right: 1.2
Front Left : 1.2
Rear Right : 1.8
NIL
NIL
Front Right : 1.8
TG
Left: 4.5
Right: 4.5
Rear Left : 3.0
Rear Right
͹
2.0
Rear Left : 2.0
Front Left : 1.3
Front Right : 1.3
Front Left : 1.3
Rear Right : 2.0
NIL
NIL
Front Right : 2.0
Top plate
Stainless Steel
Stainless Steel
Stainless Steel
Burners
Left : (B) Right:(B) Rear Left : (M)
Rear Right : (S) Rear Left : (S) Front Left : (ES)
Front Right: (ES) Front Left : (ES)
Rear Right /Front
Right : (S)
Pan Support
Cast Iron Cast Iron Cast Iron
Knob Cylindrical Cylindrical Cylindrical
Flame Safety
Device
Yes Yes Yes
Ignition
DC
(DC1.5V) (DC1.5V) (DC1.5V)
AC
AC (220~240)V
AC (220~240)V
AC (220~240)V
Note: The manufacturer reserves the right to effect any technological improvement or
modification without prior notice.

6
Safety Instructions
Safety Precautions
oAll operations including installations, repairs, maintenance, gas and electrical connection
or conversion to other types of gas must be carried out by a suitably qualified and
competent person as set out by the local gas and electricity providers. You are to contact
your local Rinnai Customer Care Centres if there is a need to convert to another type of
gas.
oUsing the gas hob will cause a build-up of heat and moisture in the room in which it is
installed. Ensure that the room has sufficient natural or mechanical means of ventilation,
e.g. an extractor.
oIf the hob is used for very long periods of time additional ventilation of the room may be
necessary, e.g. by opening windows or doors, or running the extractor on the highest
setting.
oThis gas hob is not designed for commercial or professional use. It is only intended for
use in domestic households. Any other usage of the appliance other than the purpose in
which it is designed for could void the warranty. The manufacturer is exempt from all
responsibilities resulting from incorrect or improper use or operation.
oThis appliance is not intended for use by people with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they are supervised
whilst using it, or have been shown how to use it by a person responsible for their safety.
oThis appliance leaves the factory set to the type of gas that is indicated on the
specifications plate. If this must be changed, call your local Rinnai Customer Care
Centres.
oNever open the outer casing of the appliance. Tampering with electrical connections or
components and mechanical parts is highly dangerous to the user and can cause
operational faults
oThe surfaces of cooking appliances heat up during use. Care must be taken when using
these appliances. Keep children well away from this appliance.
oFats or oil which is overheated can catch fire easily. Do not leave oil or fats to heat up
unattended. If oil or fats do catch fire, never use water to put the fire out. Put the fire out
by covering the pan with a lid and switch off the appliance.
To avoid the risk of accidents and damage to the appliance, please read
these instructions carefully
before installation and using it for the fir
st time.
They contain important notes on installation, safety,
operation and care.
Ke
ep this manual in a safe place and ensure that new users are famil
iar
with the instructions. Pass them on to any future owner.

7
Safety Instructions
oDo not store or use corrosive chemicals, steamers, flammable materials or non-food
products below or near this domestic appliance.
oIf the appliance has not been used for a long period of time it should be thoroughly
cleaned before it is used again. It is also advisable to have the appliance tested for
safety
oIf a cooker hood is installed above the gas hob, ensure that the burners are always
covered with a pan when in use. Otherwise flames could reach the cooker hood, parts of
which could then be damaged or set on fire.
oDo not flambé under a cooker hood. The flames could set the cooker hood on fire.
oDo not use the appliance as a resting place for anything else. The article could melt or
catch fire if residual heat is still present or if the appliance is switched on by mistake.
oDo not cover the appliance, e.g. with a cloth, kitchen foil, etc. This could be a fire hazard
if residual heat is still present or the appliance is switched on by mistake.
oDo not uses plastic or aluminium foil containers. These melt at high temperatures and
could catch fire.
oDo not heat up unopened tins of food on the hob as pressure will build up in the tin,
causing it to explode. This could result in injury and scalding or damage.
oMake sure all the components of the gas burners have been correctly assembled before
switching on.
oPans must be the correct size for the burner they are used on (see "Suitable pans"). A
pan which is too small will be unstable on the pan support. If the pan diameter is too
large, flames can spread out to the sides and damage or burn the worktop, wall
claddings or surrounding units and also parts of the hob
oBefore connecting the appliance to the mains electricity supply, make sure that the data
quoted on the data plate match the household mains supply, otherwise the appliance
could be damaged. Consult a qualified electrician if in any doubt.
oIf the appliance is supplied without a plug, or if the plug is removed, it must be connected
to the mains electricity supply by a suitably qualified and competent electrician in strict
accordance with current local safety regulations. The manufacturer cannot be held liable
for damage caused by incorrect installation or connection.
oConnection to the gas supply must be carried out by a suitably qualified and competent
person in strict accordance with current local safety regulations

8
Safety Instructions
oFor safety reasons, this appliance may only be used when it has been built in.
oInstallation, maintenance and repairs may only be carried out by a suitably qualified and
competent person in strict accordance with current local safety regulations.
oDuring installation, maintenance and repair work, the appliance must be disconnected
from the gas supply and mains electricity supply. While the appliance is under warranty,
repairs should only be undertaken by a service technician authorised by Rinnai.
Otherwise the guarantee is invalidated.
oFaulty components must only be replaced with genuine original spare parts. The
manufacturer can only guarantee the safety of the appliance when original replacement
parts are used.
oDo not connect the appliance to the mains electricity supply by a multi-socket adapter or
an extension lead. These do not guarantee the required safety of the appliance (e.g.
danger of overheating).
oNever leave the appliance unattended during operation. The graphics in this instruction
manual are given as a guide only.
The Manufacturer cannot be held liable for any damages caused by
non-compliance with these Warning and Safety Instructions.

9
Using for the first time
oRemove any protective foil and adhesive labels.
oClean all removable parts of the burners with a solution of warm water and a little
washing-up liquid applied with a soft sponge. Dry all parts thoroughly after cleaning and
then reassemble the burners (see "Cleaning and care").
oClean the stainless steel trough with a damp cloth, and then wipe dry.
The metal components have a protective coating
which may give off a slight smell when heated up for
the first time.
The smell and any vapours will dissipate after a short
time,
and do not indicate a faulty connection or
appliance

10
Installation Guide
Installation
All operations relating to installation, regulation and conversion to other types of gas
must be carried out by an authorised installation personnel, respecting applicable
regulations, standards and the specifications of the gas and electricity providers.
Before you begin, turn off the appliance's electricity and gas supply.
You are recommended to contact your local Rinnai Customer Care Centres to convert
to another type of gas.
The units next to the appliance must be made of non-flammable materials. The laminated
covering and glue for adhering it must be heat resistant.
This appliance cannot be installed above fridges, washing machines, and dish washer or
similar.
An oven must have a power cooling fan to install a hob above it. Check the oven's
dimensions in its installation manual.
If a cooker hood is installed, you must follow the installation manual's instructions, always
keeping a minimum distance of 550 mm to the hob.
Preparing the Bench Top (Fig 1 & Fig 2)
Make an appropriate size cut in the work surface.
It is recommendable to place a non-flammable separator (e.g. metal or plywood) 10 mm
from the bottom of the hob. This will prevent access to the base of the hob.
On wood work surfaces, varnish the cutting surfaces with a special glue. This protects them
from moisture which could collect under the work surface.
Installation of Appliance
The adhesive seal (underside of the hob) are factory-fitted: do not under any circumstances
remove them. The seal ensures that the entire work surface will be watertight, and prevents
water seepage.
In order to fit the appliance into the kitchen unit, first place the hob in the correct position.
Insert and centre the hob. Press the sides of the hob until it is supported around its entire
perimeter.
Removal of Hob
1) Turn off incoming gas
2) Remove gas hose
3) Life the hob up.

11
Installation Guide
Fig 1 & Fig 2
1) Front
2) Battery Holder
3) Gas outlet

12
Installation Guide
Electrical installation
This series of hob have 2 type of ignition, DC and AC.
For DC hob, please install a DC 1.5v battery into the battery casing at the bottom of the
Hood. (Fig 1)
For AC connection.
The 3 wires come in 3 colour.
Brown for Live (L), Blue for neutral (N) and Green/Yellow for Earth (E). Fig 2.
The connection of wires can only be done by a suitably qualified and competent person by
the local electricity providers. These wires is connected either by a 3 pin plug or direct wall
connection. Please do not try to connect it by yourself.
For DC connection.
When the battery is exhausted; or the spark become weak, a new battery should be
replaced. The battery compartment is located as shown in the diagram. Place the battery in
the correct polarity as shown.
Warning: Please take out the battery if the hob is not use for a long time.
Fig 1 Fig 2

13
Installation Guide
Gas Connection (Fig. 3)
The end of the inlet connection point of the gas hob has a 1/2” thread that allows for:
oFixed connection.
oConnection using a flexible hose (For LPG only). In this case, it is necessary to insert the
accessory and the O-Ring as shown in Fig. 3. In this case, you must prevent the pipe
from coming into contact with moving parts of the kitchen unit being inserted (for
example, a drawer) and prevent access to any spaces which might become obstructed.
Warning! If any connection is handled, check for gas leakage. The manufacturer is not liable
for any connection leaking, after being handled.
Electric Connection (Fig 4)
Check that the voltage and power of the appliance are compatible with the electrical
installation. The hobs are supplied with a power cable with or without a wall socket plug.
Provide an omnipolar cut-off switch with a minimum contact separation of 3 mm (except for
plug connections, if the user has access to it).
Appliances with plugs must only be connected to sockets that have earth wires correctly
installed.
The supply cable can only be changed by your local Rinnai customer care centre and not the
user. The cable type and minimum cross-section must be respected.

14
Installation Guide
Gas Connection (LPG)
Fig 3
A) Gas (TG) connector
B) O-Ring
C) LPG adaptor
D) LPG hose
E) Hose clip

15
Installation Guide
Electrical Connection
Fig 4
RB-64SSV-D
RB-633SSV-DL / RB-63SSV-DR
RB-64SSV-D
RB-633SSV-DL / RB-63SSV-DR

16
Operation
Control Knob
oThe control knob is used to ignite the burner and to regulate the strength of the flame.
Operating
oThe control for the burner required must be pressed down and turned anti-clockwise to
the large flame symbol in order to operate.
oWhen the flame ignites, hold the control knob down for 5 seconds, and then let it go.
oIf the flame goes out, turn the control back to "o". Wait for at least 1 minute before
attempting to re-ignite it, press down and hold the control for longer if required
oIf the burner fail to ignite for the second time, turn the control back to "o". Refer to the
troubleshooting guide for more information.
The gas supply is turned off
High Flame
Low Flame
The burners can only be
in operation mode by pressing down the
appropriate control and turning it anti
-clockwise, and switched off by
turning the control clockwise.
The following will cause damage to the appliance:
oOperating the burner without pressing the control down,
oOperating the burner on by turning the control clockwise,
The manufacturer will not accept liability for any d
amage resulting from
incorrect operation.
Pressing a burner control will automatically create a spark on
all burners. This is normal and no cause for concern

17
Operation
In the Event of a Power Disruption (for AC model only)
oIf there is an interruption to the electricity supply, the gas hob can be ignited with a match
(small naked flame).
oPress in the relevant control and turn it anti-clockwise to the large flame symbol.
oHold the control down and light the burner with match sticker (naked flame).
oKeep the control pressed in for a further 8-10 seconds and then release it.
Regulating the Flame
Switching OFF
Turn the control clockwise to position "o"
This stops the flow of gas and the flame goes out
Warnings
oIt is normal to hear a slight whistling noise while the burner is operating.
oWhen it is first used for the first time, it is normal for the burner to give off odours; this
does not pose any risk and does not indicate a malfunction; the smell will be gone over
the time.
oA few seconds after the burner is switched off, a sound (thud) will be produced. This is
not a fault - this means that the safety device is no longer operating.
oKeep the burner as clean as possible. If the ignitor are dirty they will not light properly.
Clean them periodically using a small non-wire brush. Bear in mind that the ignitor must
not suffer any serious impacts.
oAn orange-coloured flame is normal. This is caused by the presence of dust in the
atmosphere, spilt liquids, etc.
oThe kitchen will become hot and humid when this gas appliance is used. You must
therefore ensure that the kitchen is well ventilated: either keeping the natural ventilation
apertures open, or install a ventilation system (cooker hood).
The burners can be regulated at any level between
the highest and lowest flame.
Control the
flame so that it does not spread out
beyond the sides of the pan. As the outer part of the
flame is much hotter than the centre, the tips of the
flames should stay beneath the pan base. Flame tips
which extend beyond the sides of the pan merely
warm up the
air in the room and can also damage pan
handles and increase the danger of injury

18
Operation
oIf using the appliance intensively for prolonged periods, you may require additional
ventilation (e.g. by opening a window) or more effective ventilation (e.g. by increasing the
hob's ventilation, if possible).
oIf the burner flames are accidentally blown out, switch off the burner operating control
knob and do not try to relight it for at least one minute.