Risco lightsys 2 Instruction manual

Quick User Guide
Thank you for choosing LightSYS flexible hybrid system . This quick start guide
describes the main user operating actions of the LightSYS. To view the full version of the
user manual, please refer to our website www.riscogroup.com.
Register with RISCO Cloud (if enabled)
Registering with RISCO Cloud enables you to monitor and control your LightSYS2 system.
1. Go to www.riscocloud.com/register.
2. Enter your first name and last name.
3. Enter your email address as Login Name (required for 1st time activation).
4. Define password (minimum of 6 characters and at least one digit) and confirm.
5. Enter in the 15 digits Panel ID as it appears: on the postcard that arrived with the panel or
supplied by the engineer (also available in the keypad menu).
6. Complete registration form and click Register.
7. To complete registration open the email message received on the email account you defined as
Login Name.
Login to RISCO Cloud
1. Go to www.riscocloud.com.
2. Enter User Name and Password (same as supplied during the registration process).
3. Enter Passcode/PIN (LightSYS User Code).
4. Click Enter.
iRISCO – RISCO’s Smartphone Application
Homeowners can now enjoy the iRISCO Smartphone app for smart and easy control of their
LightSYS2 system from any location.
Download the iRISCO app from the Apple App store or Android Play Store (Search for “iRISCO”).
LightSYS2 Quick User Guide 1

Interface:
LCD Keypad (432KP)
Full Set Code >
Part Set Code >
System Unset and
Silence an Alarm Code>
Partition Full Set Code > >Partition No. >
Partition Part Set Code > >Partition No. >
Partition Unset Code> > Partition No. >
Duress Unset Duress Code >
Panic Alarm Pressing simultaneously for 2 seconds
Fire Alarm Pressing simultaneously for 2 seconds
Medical Alarm Pressing simultaneously for 2 seconds
Quick Zones Omit Code > [Zone No.]
Activate Output [Code] [Activities] [Prgrm Output Num]
Define Follow-Me >[Code] [Follow Me] [Define]
View Fault [Code] [View] [Fault]
View Event Log [Code] [Event Log]
Keypad Chime On/Off [Code] [Activities] [Keypad sound] [Chime]
Edit User Code [Code] [Codes/Tags] [Define]
Zone
Testing (Walk Test)
[Code] [Maintenance] [Walk Test]
2 LightSYS2 Quick User Guide

2-way Slim keypad
Operation
Quick
High-Security Mode1
Set – System
> [Code] 2
Full Set – Partition
Select partition
[1/2/3] >
Select partition [1/2/3]
> > [Code]
2
Full
Unset 1. > [Code] or 2. Proximity tag (after waking)
Partial Set – System3
> [Code]
Partial Set – Partition
Select partition Select partition
[1/2/3] > [1/2/3] > > [Code
Partition Unset Select partition 1/2/3/4 and press followed by [Code]
Panic alarm
Press + simultaneously for 2 seconds
Fire alarm
Press + simultaneously for 2 seconds
Emergency/Med alarm Press + simultaneiously for 2 seconds
Status Request
Press for 2 seconds to view LED
display of system status (see Indicators
below)
Press for 2 seconds
followed by code2to view
LED display of system
status (see Indicators below)
Output Control
Press 1/2/3 for 2 seconds
Press 1/2/3 for 2 seconds
followed by code
2
Wake up keypad
Press
2-way Remote Control keyfob
Operation
Quick
High Security Mode1
Full Set
> [Code]
Partial Set*
> [Code]
Full Unset
> [Code]
System
Status for 2 seconds for 2 seconds >
Code
LightSYS2 Quick User Guide 3

Output Control A/B/C for 2
seconds
for 2
seconds > [Code]
Panic Alarm simultaneously for 2 seconds
Clear Operation
Notes:
*For Part setting with no entry delay, press and hold for two seconds
1. Consult your engineer for the operations defined with a code.
2. The proximity tag can be used instead of code.
3. For Part Setting with no entry delay press for 2 seconds.
4. Light sensor is used to save battery by turning on/off the keypad backlight.
5. Needs to be defined by your engineer.
Smartphone
Full Set – System
Full Set – Partition >
Full Set – Group
(if supported)
>
Partial Set – System
Partial Set – Partition
>
System Unset > [Code]
Partition Unset >
Detector Omit
(On/Off toggle)
> >
Web Application
SET/UNSET
Full Set All Partitions or PARTITION x> Full Set
Full Set – Group
(if suppored)
[Group Letter] > Full Set
Or PARTITION x > [Group Letter]
Part Set All Partitions or PARTITION x> Partial Set
4 LightSYS2 Quick User Guide

Unset All Partitions or PARTITION x> [Code] > UNSET
SETTINGS
System user and codes Edit, Delete and ADD NEW USERs
Web interface users and codes EDIT user fields and access credentials
Change Password Enter Old/New/Confirm > SET NEW PASSWORD
Quick Zone Omit Select ZONE xx > Omit > Update
Change Appearance Select Color Scheme
Alerts/Add New Contact Enter
Name, Email/Mobile phone #.
Select Alert Language, Partition association,
and toggle Set/Unset Email and SMS
Time Zone Select system TIME ZONE
HISTORY
Review activity log and export
AUTOMATION
Programmable Outputs Toggle ON/OFF > Update
Indicators:
LCD and Touchscreen Keypads
(Power):
On: Power OK, No faults
Off: No power
Rapid Flash: System fault
(Ready):
On: Ready to set
Off: Not ready to set
Slow Flash: Ready to set with
open Exit/Entry zone
(Set) / RED LED
On: System armed
(Full or Part set)
Off: System unset
Slow Flash: System
is in Exit Delay
Rapid Flash: Alarm
(Tamper) :
On: Tamper alarm
Off: No tamper alarm
( PartSet/Omit):
On: System part setting/omit
zones in the system
Off: No omitted zones
(Fire):
On: Fire alarm
Off: No fire alarm
Flash: Fire fault
(Proximity) [Touchscreen only]
Flashing: Indicates keypad has a
proximity reader
LightSYS2 Quick User Guide 5

2-way Slim Keypad
LED Indicator
Color
State
Status
Blue
Blink
During communication with the panel
Red
On
Slow flash
Rapid flash
System fully or partially armed
During exit delay
During alarm
Green
Blink
Fault indication in the system while
the system is unset*
Green/Red
Toggle
Waiting for code to be entered
2-way Keyfob
Operation
1st LED* (Send command)
2nd LED* (Receive Status)
Full Setting
Green
Red
Part Set
Green
Orange
Unset
Green
Green
Alarm
Green
Flash LED
* If the 1
st
LED changes to orange, it indicates a low battery condition.
Edit User Code
1. From the main display press .
2. Enter master code (default code 1234) followed by .
3. Scroll to the option Codes/Tags > .
4. Scroll to Define and press .
5. Select a user and press .
6. Select Edit Code and press .
7. Enter the new code followed by .
8. To edit user label scroll to Edit Label and enter label.
9. Repeat the above steps for additional codes.
Assign Proximity Tag
1. Follow steps 1-5 of the Edit User Code above.
2. Select (Re)Write tag and press .
3. Within 10 seconds, approach the proximity tag to the keypad.
6 LightSYS2 Quick User Guide

Setting and Changing System Time and Date
1. Press and enter grand master code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. The display will show Time & Date. Press .
4. Enter the correct time in 24-hour format and date. For entering the date use the
keys to move the cursor and the / key to toggle among the
choices.
5. Press to save your settings.
SMS Control Commands via GSM
Controlling the System through SMS
(Note: Available only if your LighSYS is equipped with the GSM module)
SMS Structure: [User Code][Command]
Full set: [Code] A
Home Set:[Code] H
Group Set: [Code][G][Select Group
A/B/C/D])
Full Unset: [Code] D
Partition Set: [Code] A[Partition No.]
Partition Unset: [Code] D [Partition No.]
Omit zone: [Code] B[Zone number]
Unomit zone: [Code] UB[Zone number]
Activate Output: [Code] POON [PO No.]
Deactivate Output: [Code] POOFF [PO
No.]
Get system status: [Code] ST
Get SIM credit level: [Code] CR
Change FM number: [Code] FMPHONE
[FM serial number] NEW [New Phone
No.)
Examples:
To set the system send SMS: 1234A
To set partition 1 and 2 send SMS: 1234A12
To unset partition 1 send SMS: 1234D1
Notes:
1. Command words are not case sensitive (they can contain both capital, small or mixed lettering).
2. A separator between command words is not required, although it is accepted.
3. Default grand master code is 1234.
4. Add RP at the end of your SMS in order to receive a reply SMS from the LightSYS acknowledging
that your command has been successfully performed.
Example: To set system and receive a reply acknowledging that the action was performed send
SMS: 1234ARP
LightSYS2 Quick User Guide 7

Telephone Control Commands
Remark: Available only if your LightSYS is equipped with a voice module.
Receiving a call:
1. Pick up the phone.
2. Say “Hello” press [#]. You will
hear an event announcement
message.
3. Choose an option from the
Acknowledgment menu.
Acknowledgment menu
Acknowledge message: [1]
Acknowledge and stop all dialing: [2] [User
code] [#]
Access Operations menu: [3] [User code] [#]
Listen and Talk: [6] [3] [User code]
Repeat the event message: [#]
Repeat the Acknowledgment menu: [*]
Calling the System:
1. Dial the number of the
premises.
•If an answering machine is
present at the premises: Let
the line ring once, hang up
and call again.
•If an answering machine is
not in use at the premises:
Wait until the system picks
up. You will hear a
continuous tone.
2.After the tones, enter the 2-digit
remote access code.
3.Enter your user code followed by
[#].
4.Choose your option from the
Operations menu.
Operations Menu:
Arming all Partitions: [1] [1]
Arming by Partition: [1] [9] [Partition no.]
Unsetting all Partitions: [2] [2]
Unsetting by Partition: [2] [9] [Partition no.]
Changing Zone Omit: [3] [Zone no.] [#] [9]
Operating Programmable Outputs: [4] [PO no.]
Changing FM Numbers: [5] [FM no.] [#] [2]
[New phone no.]: [#] [1]
Listen in:[6] [1]
Talk:[6] [2]
Listen and Talk :[6] [3]
Record Messages : [7]
Exiting the System: [0]
Repeat the Menu: [#]
Return to previous menu: [*]
© RISCO Group 06/20135IN2053
8 LightSYS2 Quick User Guide