Risco ProSYS Plus Instruction manual

ProSYS Plus
Quick User Guide
Full (“Away”) Arming
❖Quick mode:
❖High Security mode: Code ➢
❖Quick mode: .
❖High security mode:
➢code or use Proximity
tag
❖Quick mode:
❖High Security mode: Code ➢
to apply to all partitions,
or slide a specific partition to
the right under .
Full Arm all: Security ➢
Press
❖Quick mode: .
❖High Security mode: ➢code
Press
Partial (“Stay”) Arming
❖Quick mode:
❖High Security mode: Code ➢
❖Quick mode: .
❖High security mode:
➢code or use Proximity
tag
❖Quick mode:
❖High Security mode: Code ➢
to apply to all partitions,
or slide a specific partition to
the left under .
Partial Arm all: Security ➢press
Press
❖Quick mode: .
❖High Security mode: ➢code
Press or large rounded
button (installer-defined)

08/2020
Page 2
5IN2370 C
Partition & Group Arming
❖Full partition arming:
Code ➢“Security” menu ➢“Partitions” tab ➢select All or specific partition
number/s ➢
❖Partial partition arming:
Code ➢“Security” menu ➢“Partitions” tab ➢select All or specific partition
number/s ➢
Group Arming: “Groups” tab ➢press group letter
❖Full partition arming:
Code ➢➢select All or specific partition number/s ➢
❖Partial partition arming:
Code ➢➢select All or specific partition number/s ➢
Group Arming: Press group letter
Note: Supports up to 3 partitions. Does not support Group arming.
❖Full partition arming:
•Quick mode: Partition number ➢
•High Security mode: Partition number ➢➢code or use Proximity tag
❖Partial partition arming:
•Quick mode: Partition number ➢
•High Security mode: Partition number ➢➢code or use Proximity tag

08/2020
Page 3
5IN2370 C
System Disarming
Code ➢“Security” menu ➢
➢code or use Proximity
tag
Code ➢
to disarm all partitions, or
slide a specific partition to the
center under ➢enter code
Disarm all: Security ➢➢code ➢
press Disarm
Press
❖Quick mode: .
❖High security mode: ➢code
Disarm all: Press
Partition & Group Disarming
Code ➢“Security” menu ➢“Partitions” tab ➢select the Partitions to Disarm
➢
Partition disarming: Code ➢➢select
All or specific partition number(s)
Group disarming:
Partition disarming:
Partition number ➢
➢code
Duress Disarming
Duress code ➢
Note: Panel is silent (no alarm siren)
➢duress code
Note: Panel is silent
(no alarm siren)

08/2020
Page 4
5IN2370 C
Bypassing & Un-bypassing Zones
Code ➢“Security” menu ➢“Detectors” tab ➢select a detector (zone) ➢
slide switch to the right to bypass
➢code, ➢scroll to Activities menu, ➢Bypass, ➢Zones,
➢scroll to select a bypass option, .
Viewing System Troubles
Code ➢from the Top Bar, press to view troubles
➢code, ➢scroll to View menu, ➢Trouble , ➢scroll to view
troubles
Viewing Last Alarm / Event Log
Code ➢“History” menu ➢press “All” to view all events, or search an event
Note: You can filter the search according to specific types of events:
All / Alarms / Troubles / Smart Home / Media Events
➢code, ➢scroll to Event Log, ➢scroll to view events
Viewing System Status
for 2 seconds
❖Quick mode:
for 2 seconds
❖High Security mode:
for 2 seconds ➢
code or use
Proximity tag
Press
❖Quick mode: for 2 seconds
❖High Security mode: for 2 seconds ➢code

08/2020
Page 5
5IN2370 C
Activating Output
Code ➢
“Security” menu
➢
“Utiltiy Output”
tab ➢select
relevant Utility
Output button,
√
➢code,
➢scroll to
Activities menu,
➢enter
Utility Output
number, .
Note: Must be
installer-defined
❖Quick mode: Press
button (1—3) for 2
seconds
❖High security
mode: Press button
(1—3) for 2 seconds
➢code or use
Proximity tag.
Note: Must be
installer-defined
❖Quick mode: Press button (1—3) for 2 seconds
❖High security mode: Press button (1—3) for 2 seconds ➢enter code.
Note: Must be installer-defined

08/2020
Page 6
5IN2370 C
Activating a Panic Alarm
Press the Emergency button (located at the top of the Lock Screen or at the
end of the main menu) ➢➢press and together for 2 seconds.
Press and together for at least 2
seconds.
Press and
together for 2 seconds
Press and simultaneously
Press and together for 2 seconds.
Activating a Fire Alarm
Press the Emergency button (located at the top of the Lock Screen or at the
end of the main menu) ➢➢press and together for 2 seconds.
Press and together for at least 2 seconds.
Press +
together for 2 seconds
Activating an Auxiliary Emergency Alarm
Press the Emergency button (located at the top of the Lock Screen or at the
end of the main menu) ➢➢press and together for 2 seconds.
Press and together for at least 2 seconds.
Press +
together for 2 seconds

08/2020
Page 7
5IN2370 C
SMS Commands
NOTES: Command words are not case sensitive. A separator between command words
may be used (or not). To receive an acknowledgement reply, add RP to the end of an SMS
command.
Full Arm: code + A (Example: 1234A)
Get system status: code + ST
Home Arm: code + H
Bypass Zone: code + B + zone number
Group Arm: code + G + select group A--D
Un-bypass Zone: code + UB + zone
number
Full Disarm: code + D
View last alarm : code + AL
Partition Full Arm: code + A: + partition number
Change FM number: code +
FMPHONE +
FM serial number + NEW + new
phone number
Partition Home Arm: code + H: + partition number
Activate Output: code + UOON + UO
number
Deactivate Output: code + UOOFF +
UO number
Multiple Partition Full/Home Arm: code + A/
H: + partition number A, + partition number B, +
partition number C, etc.
Get SIM credit level: code + CR
Partition Disarm: code + D: + partition number
Get SIM credit level: code + CR
Multiple Partition Disarm: code + D: + partition
number A, + partition number B, + partition
number C, etc.
LED Indicators –Elegant Keypad
Power LED
On: Power OK.
Off: No power
Rapid flash: System trouble.
Slow flash: System is
programming
Ready LED
On: Ready to arm
Off: Not ready to arm
Slow flash: Ready to arm
while entry/exit zone is
open
Arm LED
On: System in fully armed
mode
Off: System disarmed
Rapid flash: Alarm
Slow flash: System in Exit
Delay
Partial Arm / Bypass
LED
On: System in partially-
armed or zone-bypassed
mode
Off: No bypassed zones
Tamper LED
On: Tamper alarm
Off: No tamper alarm
Fire LED:
On: Fire alarm
Off: No fire alarm
Flash: Fire circuit trouble

08/2020
Page 8
5IN2370 C
LED Indicators –2-Way Remote
Control
Defining User Codes –Elegant
Keypad
Operation
Send
command*
Receive
Status
Full Arm
Green
Red
Partial
Arm
Green
Orange
Disarm
Green
Green
Alarm
Green
Flashing LED
* If the LED changes to orange, it indicates
a low battery condition.
1. ➢Grand master code (default = 1234)
,
2. to scroll to Codes/Tags ➢press
twice.
3. to scroll to the user (index number)
for defining ➢press twice.
4. Enter (or re-enter) a 4—6 digit code, ;
the system beeps and ACCEPTED
displays
Registering to the RISCO Cloud
1After the RISCO Cloud has been enabled by your system installer, go to
www.riscocloud.com
2Fill in your first and last name.
3Enter your e-mail address as the Login Name (required for 1st-time activation).
4Define password (minimum of 6 characters and at least one digit), and then confirm.
5Enter the 15 digits Panel ID as it appears as printed on the postcard packaged with the
main panel. You can also view it on the keypad (see the ProSYS Plus User Manual).
6Complete registration form, and then press Register.
7Open the e-mail received at the email account you had defined as the Login Name in
step 3, and then click the link to activate your registration to the Cloud.
Logging in to the RISCO Cloud / Accessing the Web User Application
1Go to www.riscocloud.com
2Enter your user name and password (as defined during the registration process).
3Enter the system PIN code (user code).
4Click Enter.
iRISCO Smartphone App
Download the iRISCO Smartphone app from the Apple App store or the Android Play
Store.
For additional information see the ProSYS Plus User Manual, available on our website:
www.riscogroup.com
© RISCO Group 2020. All rights reserved.