Risco Agility 4 Instruction manual

1
Agility 4
Quick User Guide
This describes main user operations. For the full user manual, see our website:
www.riscogroup.com/uk
Full Setting
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Full Set.[SMS]: Enter code + S
Example: 1234S
Press [Smartphone App]: Press .

2
Part Setting
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Part Set.[SMS]: Enter code + P
Example: 1234P.
Press [Smartphone App]: Press .
Partition Setting
 Quick mode: Press partition
number (1–3), then press Full
Setting ( ) or Part Setting ( ).
 High security mode: Press partition
number (1–3), press Full Setting (
) or Part Setting ( ), then enter
code or use proximity tag.
 High security mode: Press partition
number (1–3), press Full Setting
( ) or Part Setting ( ), then
enter code.
 Quick mode: Press partition number
(1–3), then press Full Setting ( )
or Part Setting ( ).
 Quick mode: Press partition
number (1–3), then press Full
Setting ( ) or Part Setting ( ).
 High security mode: Press partition
number (1–3), press Full Setting (
) or Part Setting ( ), then
enter code or use proximity tag.
[SMS]: Enter code + S(Full) or P
(Part). Now enter partition number (1–
3). Example: 1234P3.
Partition Setting (Full and Part) via
Smartphone App.

3
Quick Zone Omit
Press and enter code, at
Activities menu press , at Omit
Zone press , scroll to zone to
Omit, press .
Quick zone Omit via Smartphone
App.
Press and enter code, at
Activities menu press , at Omit
Zone press , scroll to zone to
Omit, press .
System Unsetting
Press then enter code or use
proximity tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
Press then enter code or use
proximity tag.
Press .
Press
[SMS]: Enter code + US
Example: 1234US.
[Web Application]: Enter user code,
then click Unset.[Smartphone app]: Press .

4
Partition Unsetting
Press partition no. (1–3), press .
Enter code or use proximity tag.
 Quick mode: Press partition
number (1–3), then press .
 High security mode: Press
partition number (1–3), press
, enter code.
Press partition no. (1–3), press
. Enter code or use proximity
tag.
Press (for all assigned partitions)
Press (for all assigned partitions)
Partition unsetting via Smartphone
App.
[SMS]: Enter code + US + partition
number (1–3). Example: 1234US2
View
/
Hear System Status
NOTE: Short-press for LCD display, or
long-press for display + announcement.
 Quick mode: Press
High Security mode: Press ,
then enter code or use proximity tag.
View system status via
Smartphone App.
NOTE: Short-press for LCD display, or
long-press for display + announcement.
 Quick mode: Press
 High Security mode: Press ,
then enter code or use proximity tag.
View Last Alarm
Press for two seconds.
View last alarm from Event log via
Smartphone App.
Press for two seconds.

5
Panic Alarm
Press and simultaneously.
Press and simultaneously.
Press and simultaneously.
Press and
simultaneously.
Press small button (if installer defined).
Additional Operations at LCD Keypad
Duress Unsetting Press , then enter duress code.
Fire Alarm Press and / and (Panda Keypad)
simultaneously for 2 seconds.
Emergency/Medical
Alarm Press and / and (Panda Keypad)
simultaneously for 2 seconds.
System Chime On/Off Press for 2 seconds.
Output Control Press , , or (installer-defined) for 2 seconds.
Wake up keypad Press .
Main Panel Speaker
Volume
Press for 2 seconds.
Select volume level (0–4), and then press .
Change keypad and panel
language
Press and simultaneously for 2 seconds.
Scroll to select language, then press (Panda Keypad)
SMS Commands
Full Set: code + S (Example: 1234S) Omit Zone: code + OM + zone number
Part Set: code + P Un-omit Zone: code + UNOM + zone number
Unset: code + US View last alarm: code + AL
Partition Full Set: code + S + partition
number Activate Output: code + POON +
UO number
Partition Part Set: code + P + partition
number
Partition Unset: code + US + partition
number Deactivate Output: code + POOFF + PO number
Get system status: code + ST

6
Telephone Event Notifications / Command*
When Receiving a Call:
1. Pick up the phone and say “Hello” or
press #;You will then hear an event
announcement message.
2. Now acknowledge the event (see
Acknowledgment menu).
Acknowledgment Menu
 Acknowledge message: Press 1
 Acknowledge and stop all dialing:
Press 2 + code + #
 Access Operations menu: Press 3+ code + #
 Listen and Talk: Press 6
 Repeat event message: Press
#
 Repeat the Acknowledgment menu: Press *
Sound Indicators
Intrusion alarm: Continuous, rapid beeping.
Fire alarm: Staggered, rapid beeping.
Exit delay: Slow buzzer beeps until the Exit Delay time expires.
Entry delay: Slow buzzer beeps until the Entry Delay time expires.
Confirm operation: 1-second tone.
Reject operation: Three rapid error beeps.
Set/Unset chirp: 1 sounder chirp = system set
2 sounder chirps = system is unset
4 sounder chirps = system unset after an alarm
\LED Indicators (Wireless Agility Keypad RW132KP)
Power LED (Green)
On: Power OK.
Rapid Flash: AC Fault.
Slow Flash: Low battery Fault.
Set/Alarm LED (Red)
On: System fully Set.
Rapid Flash: Alarm.
Slow Flash: System in Exit
Delay.
Ready LED (Green)
On: System ready.
Off: Open zones.
Slow Flash: Ready to Set with open
entry/exit zone.
Fault LED (Amber)
Rapid Flash: Fault.
Off: No Fault.
[All LEDS] Learn mode: all
LEDS are flashing, one after
the other.
Part Set LED (Red)
On: System partially set.
Off: System unset.
\LED Indicators (Wireless Panda Keypad RW332KP)
Cloud Icon
On: System connected to cloud.
Slow Flash: Cloud connectivity
fault.
Off: No cloud connectivity
Set/Alarm Icon
On: System set.
Rapid Flash: Alarm.
Slow Flash: System in Exit
Delay.
Off: Unset
Ready Icon
On: System ready.
Off: Open zones.
Slow Flash: Ready to set with open
entry/exit zone.
Fault Icon
On: Fault.
Off: No Fault.
Tamper Icon
On: Zone/keypad/external
module has been tampered.
Off: Normal operation.
Part Set Icon
On: System part set or omitted
zones.
Off: No omitted zones.
*Not available during Cloud mode unless a multi-socket communication module is installed.

7
Assign and Edit Users (User Codes) Assign Proximity Tag
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to User Codes, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to designate
to a system user), then press .
6. Enter (or re-enter) the new code.
7. Re-enter the new code; the system beeps and
“Accepted” displays.
8. Repeat the above steps for additional codes.
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to Proximity Tags, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to
designate to a proximity tag user), then press
.
6. Within 10 seconds, hold the proximity tag at
1–2 cm from the keypad buttons; a long beep
indicates the tag has been registered.
NOTE: If the tag was already registered, 3
beeps will sound and a message will display.
Registering to the RISCO Cloud
1 Go to www.riscocloud.com and click Register.
2 Enter your first name and last name.
3 Enter your email address as Login Name (required for 1st time activation).
4 Define password (must be: a minimum of eight characters; contain at least one capital letter and
one lower case letter; contain at least one number; and contain at least one special symbol) and
confirm.
5 Enter in the 15 digits Panel ID as it appears: on the postcard that arrived with the panel or
supplied by the installer (also available in the keypad menu as described below).
6 Complete registration form and click Register.
7 To complete registration open the email message received on the email account you defined as
Login Name.
Logging in to the RISCO Cloud / Accessing the Web User Application
1 Go to www.riscocloud.com
2 Enter User Name and Password (same as supplied during the registration process).
3 Enter Passcode/PIN (Agility4 User Code).
4 Click Enter.
iRISCO Smartphone App
Download the iRISCO Smartphone app from the Apple App store or the Android Play Store.

8
© RISCO Group 12/2018. All rights reserved. 5IN2680 B