Ritron RPM 60 Series User manual

VHF/UHF Mobile Radios
VHF 30/5 Watt, 35Ch, 136-162, 148-174 MHz
UHF 30/5 Watt, 35Ch, 450-470 MHz
Rugged. Reliable. Easy to Operate. And Made in the USA.
–Small and compact
– Bright alpha/numeric LED display
– 2 dual-function programmable buttons
– Robust, front-firing speaker (5 watts)
– All metal, uni-body construction
– Wide or narrow band capable
RPM 60 Series

•PC Programmable —Windows based programming software CD-ROM
•Dealer/Field Programming Mode (no PC or software required)
•Programmable frequency steps:
VHF:2.5kHz,/5kHz/7.5kHz/10kHz/12.5kHz
UHF:6.25kHz/12.5kHz/25kHz
• CTCSS and DCS Signaling by channel
•Channel Scan, normal or priority
• Companding by channel
• DTMF ANI Encode by channel
•2-Tone Encode/Decode by channel
•3 to 7 Tone Encode ANI by channel (compatible w/ SLX)
• Voice Scrambler* by channel -Frequency Inversion
(compatible only w/ 60 Series mobiles)
• Call Tone
• "Channel Busy" TX Inhibit
• "Channel Monitor" lock-out
• External Speaker Jack for remote mount speaker
• AUX Output Connector for external data devices
e.g. mobile terminals, GPS receivers etc
• Optional MDC1200 Encoder
Includes: 1 year factory warranty, radio mounting bracket,
RM-4 hand mic w/ hang-up bracket, 12 VDC power cable w/ in-line fuse.
SPECIFICATIONS
VHF: RPM-160 UHF: RPM-460
GENERAL
FCC ID: AIERIT24-160 AIERIT24-460
FCC Parts: 90 90, 95
IC Certification: 1084A-RIT2160 1084A-RIT24460
Frequency Range: 136-162 MHz, 450 - 470 MHz
148-174 MHZ
Channel Spacing: 2.5/5.0/12.5 kHz 6.25/12.5/25 kHz
Channel Capacity: 35
Tone/Code Signaling: Decode: CTCSS, DCS, 2-Tone
Encode: CTCSS, DCS, 2-Tone,
DTMF, Selcall (3 to 7tone)
Scanning: Normal and Priority
Power requirements: 11.5 to 14.5VDC
Current Requirements: Standby: 0.23A, Receive: 0.45A
Transmit - Low: 2.0A @ 5 W
- High: 7.0A @ 30 W
Frequency Stability: + 2.5PPM (- 30 to + 60 C)
Antenna Connector: 50 ohms, UHF (SO-239)
Microphone Connector: Modular, RJ-11, 6-conductor
External Speaker Connector: 3.5mm jack
AccessoryConnector: 10 pin (optionally installed)
Weight: 2.2 lbs
Dimensions: 2.1"H x 5.8"W x 6.2"D
TRANSMITTER
RF Power Output: High: 30 W Low: 5 W
Emission Designator: 10K4F3E , 15K0F3E
Spurious and Harmonics: - 75dBc
Audio Response: Meets EIA requirements
FM Hum/Noise: - 45dB @ 25 kHz
- 40dB @ 12.5 kHz
Audio Distortion: < 5%
Timeout Timer: Adjustable
RECEIVER
Receiving System: Dual Conversion, Superheterodyne
I.F System: 43.65 MHz (1st), 450 kHz (2nd)
Sensitivity (12dB SINAD): 0.20uV typical, 0.25uV max
Selectivity (EIA): - 65dB @ 12.5 kHz, - 70dB @ 25 kHz
Spurious Rejection (EIA): - 70dB
Image Rejection (EIA): - 65dB
Intermodulation (EIA): - 70dB
FM Hum/Noise: - 45dB @ 25 kHz, - 40dB @ 12.5 kHz
Audio Output: 5 Watts into 4 ohms, <5% distortion
OutPost Callbox Teleswitch Wireless Switch ControlLiberty Repeater
VHF/UHF Portable Radios Patriot Base Station Wireless Intercom
The RPM 60 Series is compatible with these Ritron wireless products!
Your Local Dealer
505 W.Carmel Drive, Carmel, IN 46032 •PH: 317-846-1201 •FX: 317-846-4978
email: sales_info@ ritron.com •website: www.ritron.com
© 2006 Ritron, Inc. All rights reserved. Ritron, Patriot, Jobcom, OutPost, GateGuard, RadioNexus, Quiet Call and
Quick Assist are registered trademarks of Ritron, Inc. Quick Talk, Liberty, and LoudMouth are trademarks of Ritron, Inc.
PN# 14610044 07/06
Standard Accessories
Optional Accessories
RM-6TT Hand Microphone
with 12-key DTMF Keypad
RM-6 Desktop Microphone
RAM-1545 Dual-Band(VHF/UHF) Magnet-mount Antenna with 20ft. RG-58 coax/BNC
RAM-45 UHF Wave Whip Magnet-mount Antenna with 12 ft. RG-58 coax/PL-259
RPM-MRM-60 Series Maintenance/Operating Manual
NOTE: Factory programming of channels, codes, and features also available.
RSP-5 External 5 Watt Speaker
with 1Oft. Cord/3.5mm Plug
RM-4 Hand Microphone
RPMK-12 Installation Kit includes
Adjustable Mounting Bracket,
12VDC Power Cable, Hardware and
Installation Instructions
RPM 60 SERIES MOBILE FEATURES