Ocean Digital DK-70 User manual

DAB+/DAB/FM Radio
DK-70
Please read this user manual carefully before using the receiver.
User Manual

Contents
Installation - Under the cabinet ............................1
Location of Controls ...........................................3
Precautions .......................................................6
Getting started ...................................................7
DAB radio operation ...........................................8
DAB radio information .......................................10
FM radio operation ...........................................11
FM radio information .........................................12
Preset a station ................................................13
Recall a station preset ......................................14
Kitchen Timer ...................................................14
Q & A ...............................................................15
Technical Specification .....................................16

Installation - Under the cabinet
- 01 -
The DK-70 is Portable and also the under cabinet radio.
Here are the steps to install the DK-70 underneath the
hanging cabinet in the kitchen:
1. The radio comes with a mounting board and screws
(4 pcs) for installation. Slide out the board on the radio
first.
2. Screw the mounting board underneath the cabinet.
3. Slide the radio into the mounting frame.
Warning: To prevent damage, do not place any heating
or cooking appliance beneath the unit, install the unit
as far as possible from a source of noise such as
fridge, microwave oven etc.

Mounting board
Cabinet
Screw
Mounting board
È
Slide in
Slide out the rear board on the radio
➀
➁
➂
➃
Installation - Under the cabinet
- 02 -

- 03 -
Location of Controls
1 2 36 7 8 11 4 9 5 10
12
13
14
15
16
17
18

Location of Controls
- 04 -
1.
Press briefly to power on. Press and hold to power off
2. INFO/MENU
[Info]
Press the button repeatedly to view various info
broadcasted by the radio station
[Menu]
Press and hold the button to enter the system menu
3.
Long press the button to enter the Preset list, short
press the button to recall the preset list.
4. ▲
[DAB mode]
- Enter the station list after scan
- Scroll up on the menu list
[FM mode]
- Every press of the button will scan the frequency
upwards by 0.05MHz.
- Press and hold the button will fast skipping the
frequencies
- Scroll up on the menu list
5. ▼
[DAB mode]
- Enter the station list after scan
- Scroll down on the menu list
[FM mode]
- Every press of the button will scan the frequency
downwards by 0.05MHz
- Press and hold the button will fast skipping the
frequencies
- Scroll down on the menu list

Location of Controls
6-8. Preset button 1-3
Press and hold the button 1-3 to quick saving the
favourite channel, hit the same button to recall the
channel
9. (Kitchen Timer)
Press to enter the timer setting
10. OK
- Press to confirm a selection
- Press to turn on the backlight
- Press and hold the button in FM mode will initiate an
auto scan.
11.Display
12. Speaker
13. Antenna
14. Volume control
Rotate the knob to increase or reduce the volume
level.
15. Earphone socket
16. Battery charging indicator
17. USB port for charging built-in battery
18. Slidable board
Additional mounting board is supplied for installation
to the kitchen cabinet
- 05 -

• The radio should not be used in a high temperature or
high humidity environment over prolonged periods of
time as this may damage the unit.
• Keep the radio away from liquids as it may get damaged.
Please switch off the radio immediately if water or liquids
is spilled into the radio. Consult with the shop you bought
this radio for any question.
• Avoid using or storing the unit in dusty or sandy
environment.
• Do not open and repair the radio by yourself.
• Use only the specified power input voltage to charge the
battery. Connecting a power supply with a different
rating will cause permanent damage to the radio and
may be hazardous.
• Clean only with dry cloth
Precautions
- 06 -

Getting started
The radio is powered by the built-in lithium battery. A USB
cable is supplied in the product package.
Hold and press the [ ] button to power on.
To power off the radio, press and hold the same button.
Charging battery
You can check the level of battery power remains on the
radio.
When the radio is playing, press the [INFO/MENU] button
repeatedly until you see the battery indicator display as
follow:
Battery power indicator
When battery power is low, it will prompt with message
”Battery Low” to remind for battery charging.
To charge the battery, connect the micro USB plug to the
port at the rear side of the radio, connect the other end to
a power source supplied with 5V OUT. The LED will light
up in red indicates the battery is charging.
Changing radio mode
When the radio is power up, press the [ /Mode] button
to select between DAB and FM mode.
- 07 -
DAB Plus 2
BAT: 50%

DAB radio operation
- 08 -
DAB Scan
If this is the first time the radio is power up, it will scan the
DAB radio stations automatically. It will display and play
the first station after the scan is done. In case it displays
“Service not available”, press and hold the [OK] button to
start scanning.
Tune DAB station
After the scan is done, press the [▲ ▼] button will enter
into the station list, select the station you want to listen
and press [OK] to confirm. The station will start to play.
DAB main menu
There are other options available under DAB mode. Press
and hold the [INFO/MENU] button, it will enter into the
menu as follow.
Note: Always use the [ ▲ ▼] button to select and press
[OK] to confirm a selection.
System
More options available for the system setting:
• Time
There are 4 settings:
1. Set Time/Date: This allows the user to manually set the
current Time and Date.
2. Auto Update: This function will set the radio’s time and
date automatically with data sent along with the
broadcast of either the FM or DAB radio station. You
can choose “No Update” then the radio will not receive
the time data.
3. Set 12/24 hour: This option will change the format of
your clock to either 12 hour or 24 hour format.