Riverside Furniture 15350 User manual

Components and Hardware List
Made in Viet Nam
Riverside
FURNITURE
email: [email protected]
Page 1 of 2
Modern Gathering
Dining
Assembly Instructions
#15350
Rect. Dining Table Top
#15351
Rect. Dining Table Base
20 pcs.
H1
Ø6 x 1.0 x 30mm
Allen Head Bolt
20 pcs.
H2
Ø9 x Ø13mm
Spring Washer
20 pcs.
H3
Ø6 x Ø13mm
Flat Washer
4 x 110mm
Allen Wrench
1 pc.
H4
A B
C D
Top
These two parts are packed in the
#15351 Rect. Dining Table Base Carton
Post Top Plate
Leaf
1 pc. 2 pcs.
1 pc. 2 pcs.
Besuretocheckallpackingmaterialcarefullyforsmallparts,whichmayhavecomelooseinsidethecartonduringshipment.
H2
H1
H4
H3
To prevent possible scratches and damage, this furniture must be assembled by two people on a soft surface
such as a blanket or carpet.
Step 1: Set the Table Posts (B) upright and attach a Post Top Plate (D) on top using the Allen Head Bolts (H1),
Spring Washers (H2) and Flat Washers (H3). Tighten using the Allen Wrench (H4).
Step 1:
B
D
All Parts and Hardware, except Part B,
are packed in the 15350 Table Top
Carton.
Post

1 2
Page 2 of 2
LockUnlock
H3
H2
H1 H4
Step 2: Place the Table Top upside down. Attach the Post Top Plates to the bottom side of the Table Top using the same Bolts
and Washers as before. Tighten using the Allen Wrench (H4). Using two people, carefully set the assembled Table upright.
Take note of the locations of the Table Top Locks and Buckles used to hold the Table Top & Leaves together.
Step 3: To install or remove the Leaf, reach underneath the side Aprons and unlatch the Buckles at each apron joint, locate and
twist the handle of the Top Locks mounted underneath the Top Panel to unlock. Using two people, pull the two halves of the
Table Top open, place the Leaf in position, aligning the pins with the holes on the edges and push the halves back together.
Reach underneath the Table Top and reconnect the Locks and Buckles to secure the Table Top .
To prevent undue stress on the Dining Table, using two people, always lift and carry your Dining Table from one location to
another.
1234
Step 2:
Step 3:
A
A
C
Buckles
Top Locks