Roberts Stream93i User manual

ROBERTS
DAB/FM/WiFi Sound System with Internet Radio, Music Player and Spotify Connect
and remote control from ConnectR app for iPhone and Android
Please read this manual before use

Contents
Introduction......................................................................................... 1-7
Before you can use this product.......................................................... 1
About this instruction manual............................................................... 2
Controls and connections................................................................. 3-4
Remote control battery operation ..................................................... 5-6
Navigation controls.............................................................................. 7
Configuration.................................................................................... 8-19
Plugging in and language selection.................................................. 8-9
Clock and time settings ..................................................................... 10
Connecting to your computer network.......................................... 11-15
Manual network configuration....................................................... 16-18
Network remote control options......................................................... 19
Internet Radio mode....................................................................... 20-36
Internet Radio - the basics................................................................. 20
Selecting a radio station by location and genre............................ 21-23
Searching for a radio station by name............................................... 24
Selecting a new or popular station .................................................... 25
Selecting a podcast / BBC Listen Again ............................................ 26
Presetting stations........................................................................ 27-28
Display modes.............................................................................. 30-31
Customising your radio................................................................. 32-36
Music Player mode......................................................................... 37-52
Use with Windows, Apple Mac, Linux, USB memory ........................ 37
Accessing your audio files via UPnP using Windows 7, 8 & 8.1... 38-39
Locating and playing media files using UPnP .............................. 40-43
Display modes................................................................................... 44
Using USB memory devices......................................................... 45-46
Playlists ........................................................................................ 47-49
Wake On LAN.................................................................................... 50
Prune servers .................................................................................... 50
Windows 'Play To' function (UPnP renderer)................................ 51-52
Spotify Connect.............................................................................. 53-57
Spotify Connect - the basics.............................................................. 53
Set up a Spotify Connect account ..................................................... 53
Playing music using Spotify Connect ................................................ 54
Controlling Spotify on your sound system ......................................... 55
Display modes - Spotify Connect ................................................. 56-57
Streaming data rate........................................................................... 57
Friendly name.................................................................................... 57
DAB mode ...................................................................................... 58-66
Selecting a DAB radio station............................................................ 59
Display modes.............................................................................. 60-61
Finding new DAB radio stations ........................................................ 62
Manual Tuning................................................................................... 63
Dynamic Range Control settings ...................................................... 64
Station order setup ............................................................................ 65
Prune stations.................................................................................... 66
FM mode.......................................................................................... 67-73
Manual tuning.................................................................................... 68
Display modes................................................................................... 69
Scan setting....................................................................................... 70
Stereo / Mono switching .................................................................... 71
Presetting stations in DAB and FM modes................................... 72-73
Clock and Alarms ........................................................................... 74-82
Automatically updating the clock ....................................................... 74
Setting the clock format..................................................................... 75
Manually setting the clock ............................................................ 76-77
Setting the alarm clock ................................................................. 78-80
Snooze timer ..................................................................................... 81
Disabling alarms................................................................................ 81
Sleep timer ........................................................................................ 82
Display and Audio .......................................................................... 83-87
Equaliser function......................................................................... 83-84
Brightness control.............................................................................. 85
Headphone socket and Line out socket ............................................ 86
Auxiliary input socket......................................................................... 87
Inactive Standby feature.................................................................... 87
Information.................................................................................... 88-100
Factory reset...................................................................................... 88
Software update ................................................................................ 89
Network profiles................................................................................. 90
Software version display and Audio FAQ .......................................... 91
Friendly name.................................................................................... 92
Troubleshooting............................................................................ 93-94
Audio codecs ..................................................................................... 95
Cautions and Specifications ......................................................... 96-97
Software License Information............................................................ 98
Guarantee........................................................................................ 100

Stream 93i Sound System features
The Roberts Stream 93i provides the following features in an attractive
compact unit:-
●Listen to local, regional, national and international broadcasts using
FM, DAB and Internet radio
●Listen to over 1000 radio stations from around the country, and over
10,000 from around the world without using your PC.
●Listen to previously broadcast material from the BBC (using Podcasts
/ Listen Again)
●Listen to podcasts from a wide range of broadcasters.
●120 radio station presets (40 Internet Radio, 40 DAB and 40 FM).
●Use the Music Player to play your music collection from your
computer. Connection to Apple and Linux based computers is also
possible.
●Playback of audio files from USB memory devices.
●MP3, WMA, AAC, FLAC and WAV formats are supported.
●The Stream 93i connects to your home computer network, either
using WiFi or via a wired Ethernet connection.
●WiFi Protected Setup (WPS) is supported for simpler setting up with
compatible wireless routers.
●Works with Windows 'Play to' function (as a UPnP renderer).
●Compatible with Spotify Connect, allowing your Spotify selections to
be played through the sound system, remotely controlled from your
iPhone, iPad or Android device.
●Supports remote control from Apple iPhone, iPad and Android using
Roberts ConnectR app.
●All radio station presets, network configuration details and user
settings are retained in the event of a power failure.
●Large clock display with time and date when in Standby.
●Two alarm timers with snooze feature to wake you to either a buzzer
or a radio alarm.
●Adjustable sleep timer, can be set to turn the sound system off after
a delay of between 15 and 120 minutes.
●Power saving Inactive Standby.
●Easy-to-read colour graphic display with an adjustable display
backlight.
●Auxiliary input for playing audio from MP3 players, iPods or other
audio equipment.
●Line output socket for connecting the audio signal to an external
amplifier or recorder.
●Stereo headphone socket for private listening.
●High quality three way speaker system with bass woofer.

Before you can use this product
Before you can use your sound system, you must have the following:
●A broadband Internet connection (not required for DAB, FM or Music Player functions).
●A wireless access point (WiFi) or a wired Ethernet connection connected to your broadband
Internet Service Provider, preferably via a router. In many cases the broadband modem,
router and wireless access point will be a single combined unit supplied by your Internet
Service Provider or bought from a computer store.
●If your wireless network requires a security password to allow connection, then you either
need to know the WEP, WPA or WPA2 key used for encryption so that you can get the sound
system to communicate with the network, or your router needs to offer WiFi Protected Setup
(WPS).
●If you choose to connect the radio to your network using a wired Ethernet connection, than
an Ethernet cable of appropriate length will be needed. If it is intended to listen to FM radio
extensively, then there may be benefit in using a shielded Ethernet cable since this may
reduce possible interference to the radio.
The radio's WiFi system is compatible with 802.11b, g, or n networks.
If connecting using WiFi, the sound system will typically work within a 10-20 metre radius from
your wireless access point. The actual range achieved will depend upon the building type, other
nearby wireless networks, and possible interference sources. DAB and FM radio functions can
operate wherever the sound system is able to receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your wireless access point or router is
powered up and working with your broadband Internet service (use your computer to verify this).
To get this part of the system working you must read the instructions supplied with the wireless
access point or router.
1

About this instruction manual
This instruction manual is split into sections for each of the operating modes
of your Roberts Stream 93i sound system. Each section is clearly identified
by the shaded heading in the top right hand corner of each pair of pages.
Before using the Internet Radio and Music Player functions, you will need to
connect your sound system to your computer network using either the WiFi
or Ethernet connection. This is covered in the section titled Configuration.
This section also explains how to set the menu language option.
The Internet Radio section describes how to find radio stations to
listen to. These can be radio stations that you already know and listen
to conventionally, or new stations you may search for. You may set up
stations that you like as Favourites so that they are more readily accessible.
The section for the Music Player describes how you may play music
files that you may have stored on a computer connected to your network.
The use of Shared Media (using UPnP) and USB playback is explained.
The Spotify Connect section explains the use of the sound system in
conjunction with the Spotify internet based music streaming service.
The two sections for DAB and FM Radio describe how to use the sound
system to listen to conventional radio broadcasts.
The section titled Clock and Alarms describes the different ways by which
the clock in the sound system may be set, as well as explaining the use
of the alarms, snooze and sleep timer features.
The Display and Audio section shows how to adjust the display, use
the equaliser and connect your sound system to other audio equipment.
The Information section includes troubleshooting, specifications and
warranty information.
2
Configuration
Internet Radio
Music Player
DAB Radio
FM Radio
Clock and Alarms
Display and Audio
(page 8)
(page 37)
(page 20)
(page 67)
(page 58)
(page 74)
(page 83)
Information (page 88)
Introduction
Spotify Connect (page 53)

3
Controls and connections
Front view
1. Forward button
2. Back button
3. Menu button
4. Mode button
5. Preset 5 / Play button
6. Preset 4 / Pause button
7. Preset 3 / Stop button
8. Preset 2 / Fast-forward button
9. Preset 1 / Rewind button
10. Preset button
11. Info button
12. Alarm button
13. On / Standby button
14. Volume control
15. Remote control sensor
16. Display panel
17. Tuning / Select / Snooze control
18. Loudspeaker x 2
5
14
15
17
678910111213
16
1
234
18
18

4
Controls and connections - cont.
Rear view
19. Headphone socket
20. Line output socket
21. Auxiliary input socket
22. USB playback socket
23. USB socket (for service use only)
24. Ethernet socket (RJ-45)
25. DC input socket
26. Subwoofer
27. Telescopic aerial (antenna cable socket behind)
Introduction
21 20 19
27
26
222324
25

5
1
2
3
4
6
5
8
7
9
10
11 12
13
14
Controls and connections - cont.
Remote control handset
1. On / Standby button
2. Preset buttons 1-5 / Playback control buttons
3. Mode button
4. Info button
5. Volume Down button
6. Volume Up button
7. Select / Snooze button
8. Tuning / Menu Up button
9. Menu Back button
10.Tuning / Menu Down button
11.Alarm button
12.Preset button
13.Menu Forward button
14.Menu button

Remote control battery replacement
1. Remove the battery cover on the rear of your remote control by rotating
the cover approximately 45 degrees in an anti-clockwise direction to
align the dot on the cover with the 'OPEN' marking on the remote
control. Gently tap the control to release the cover. If necessary, use
a coin in the slot in the cover in order to rotate it.
2. Insert 1 x CR2025 size battery into the compartment with the positive
side (marked +) facing towards the battery cover, as shown on the
reverse side of the battery cover.
3. Close the battery cover by re-applying the cover to the control in
the position marked "Open" and then use a coin to rotate the cover
clockwise so that there is a slight click and the dot on the cover is
aligned with the "Lock" marking on the remote control.
4. If the remote is not to be used for an extended period of time it is
recommended that the battery is removed.
IMPORTANT: The battery should not be exposed to excessive heat such
as from direct sunshine, fire or the like. After use, disposable batteries
should if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.
Do not leave batteries within reach of young children. They can be a
choking hazard.
Lock
Open
Coin slot
Introduction
6

Navigation controls
This page describes the basic means of controlling your Stream 93i
sound system. Instructions for each operating mode are given in the
later sections of this book.
1. Pressing the On/Standby button brings your sound system out of
Standby mode. Pressing On/Standby while the sound system is in
use will cause it to return to the Standby mode with the clock display.
2. Pressing the Mode button gives you access to each of the operating
modes in turn: Internet Radio, Music Player, DAB Radio, FM Radio
andAuxiliary Input. Alternatively press the Mode button and then turn
the Tuning/Select control clockwise or anti-clockwise to highlight the
desired menu item then press the control to select that item.
3. Pressing the Menu button will access the menu system.
4. Many operations require the user to make a selection from the
menu. This is done using the Tuning/Select control. Turn the control
clockwise or anti-clockwise to highlight the desired menu item then
press the control to select that item.
If there are more than six items in a menu, then the display will
automatically scroll up or down so that the additional items become
visible. A sliding bar on the right will give an indication showing the
current portion of the menu that is displayed. If there are many items
in a menu, then the sound system allows the menu to 'wrap around'
in either direction. This can make it easier to reach items at the end
of a long menu, such as a list of countries or Internet radio stations.
5. The Forward button may also be used to make selections from the
displayed menu. If an error is made when navigating the menus, it
is generally possible to go back to a higher level menu by pressing
the Back button.
6. The Info button allows the display of information relating to the radio
station or music file being played.
Note: In this booklet, press always means press and release. If it is
required to give a long press on a button this is described as press and
hold. Although controls on the sound system are shown, all functions
are also available using the remote control.
4
2
3
5
5
Internet radio
Music player
DAB
FM
AUX in
Sleep
Main menu
1
7
6
2
http://
Internet
Radio DAB Radio
My Music
FM Radio AUX
Internet radio

Configuration
Configuration
Plugging in and language selection
1. Place your sound system on a flat surface and plug the cable from the mains
adaptor into the DC input socket located at the rear of your sound system
(marked 'DC in') ensuring that the plug is pushed fully into the socket.
2. If you wish to use a wired network connection, plug the Ethernet cable into
the RJ-45 socket at the back of the sound system.
3. Plug the mains adaptor into a wall socket and switch on the socket.
IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains, the mains adaptor should be removed from the mains socket outlet
completely.
4. When you apply power, the display on the sound system will light up and
say: 'ROBERTS' and 'Stream 93i'. After a few seconds the radio will then
enter Standby and the clock will display '00:00' as shown.
To continue to setup your sound system press and release the On/Standby
button. If this is the first time that you use your sound system (or after a Factory
Reset) the display will show 'Setup wizard' and 'YES' will be highlighted on
the screen.
5. By default your sound system will display all menus and messages in English.
If English is your preferred language then press the Tuning/Select control
to select 'YES' and to begin setting up your sound system.
If you selected 'YES' please skip to step 1 on page 10.
6. If your preferred language is not English, then rotate the Tuning/Select
control so that the 'NO' option is highlighted. Press the Tuning/Select control
to enter the selection.
Continue on the next page.
Setup wizard
Start now?
8
5,6
Setup wizard
Start now?
4

Setup wizard
Run wizard again
at next start up?
Plugging in and language selection - cont.
7. Your sound system will ask whether the Setup Wizard should be run at the
next start up. Although the 'YES' option is highlighted if you wish to change
the language you will need to select the 'NO' option.
Rotate the Tuning/Select control to highlight the 'NO' option. Press the Tuning/
Select control.
8. Your sound system will then display the Main menu. Rotate the Tuning/Select
control until ‘System settings’ is highlighted on the screen.
Press the Tuning/Select control to enter the System Settings menu.
9. Rotate the Tuning/Select control until ‘Language’ is highlighted on the screen.
Press the Tuning/Select control to enter the Language menu.
10. Rotate the Tuning/Select control until the desired language is highlighted on
the screen.
Press the Tuning/Select control to select the chosen language option.
The display will then change to show the System Settings menu in the chosen
language.
11. Rotate the Tuning/Select control until the ‘Setup wizard’ option is highlighted
on the screen and then press the control.
If you change the language you will not see 'Setup wizard' in English. You
will see an equivalent menu item in your language - for example, 'Assistant
réglages' in French, or 'Inställningsguide' in Swedish.
12. Rotate the Tuning/Select control until ‘YES’ is highlighted on the screen and
press the control to select it.
This will cause the sound system to run the set up procedure as if it had
just been switched on for the first time, but it will do this using the language
selected in step 10, above.
13. Continue setting up your radio on the next page.
DAB
FM
AUX in
Sleep
Alarms
System settings
Main menu
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
System settings
English
Français
Deutsch
Italiano
Dansk
Nederlands
Language
*
Brightness
Language
Factory Reset
Software update
Setup wizard
Info
System settings
Setup wizard
Start now?
9
7-12

Configuration
Date/Time
12/24 hour format
Clock and time settings
The following instructions assume that you have either just plugged in your
sound system (see page 8) or that you have just specified the language
option for the menus (see page 9).
1. Rotate the Tuning/Select control to highlight the desired clock format
(either 12 or 24 hour) then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu
allowing you to specify the auto-update option for the clock will be
shown. The 'Update from Network' option will be best for most users.
3. Rotate the Tuning/Select control to choose an auto-update option for
the clock. This can be updated from DAB or FM radio, from the Network,
or not updated. The default is to auto-update from the network. If you
choose another option go to 'Connecting to your computer network'
on page 11. Otherwise you will first need to select the correct time
zone and daylight savings setting, see the next steps. If you choose
'No update' you will need to set the clock manually later, see page 76.
Press the control to confirm your choice.
4. Rotate the Tuning/Select control to highlight the time zone for your
current location. Press the Tuning/Select control to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or
BST/GMT adjustment).
Rotate the Tuning/Select control to highlight 'ON' or 'OFF' as required.
The asterisk shows the current setting.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is
equivalent to Greenwich Mean Time.
6. Continue setting up your sound system on the next page.
10
Auto update
Update from DAB
Update from FM
Update from Network
No update *
UTC + 00:00: Dublin, Lond
UTC + 00:30:
UTC + 01:00: Madrid, Am
UTC + 01:30:
UTC + 02:00: Athens, Cair
UTC + 02:30:
Set timezone
*
Daylight savings
Daylight savings
1-5

Connecting to your computer network
Before you can use your Stream 93i sound system to listen to Internet radio or to music streamed from your
computer, it must first be connected to your computer network.
This section of this book describes how to connect the sound system to your network using either the wireless
(WiFi) connection or the wired (Ethernet) connection.
The following instructions assume that you have just set up the clock and time options using the Setup Wizard
as described on the preceding page.
These instructions also apply to the Network Wizard in the Network Settings menu (from step 2 onwards).
1. After setting the Daylight Savings options (see page 10), the display will show the 'Keep network connected?'
option. You should choose 'Yes' if you wish to keep the sound system connected to the network when it is in
Standby mode. This will allow remote control software to switch on your sound system when needed.
If you choose 'No' then your sound system will shut down its WiFi connection when it is in Standby, DAB,
FM or Aux-in modes. This minimises power consumption but it does mean that you will need to switch the
sound system on manually in order to use either Spotify Connect, the 'Play to' function or any remote control
software such as ConnectR app.
Rotate the Tuning/Select control to highlight the required option and then press the control to make the
selection.
After setting the Keep Connected option, the display will show a list of supported WiFi regional options.
Rotate the Tuning/Select control to highlight the required region (for the UK choose 'Most of Europe'), and
then press the control to make the selection. Do this even if you are planning to use the wired Ethernet
connection. Your sound system will then scan for available WiFi networks.
2. The sound system will enter the Network Settings Wizard and will display 'Scanning...'. The sound system will
automatically scan the 2.4GHz WiFi band and after a short while the display will show a list of the available
WiFi networks. If you are intending to use the WiFi connection, go to step 3 on the next page.
To use the Ethernet connection to your router (with automatic configuration), rotate the Tuning/Select control
to point to the '[Wired]' menu item. Press the control and the sound system will attempt to connect.
If your network allows automatic configuration (which is normal) the sound system will acquire a network
address. The screen should say 'Connecting...', and then 'Setup wizard completed'. Press the Tuning/Select
control to exit the setup wizard and show the Main menu. You can then skip to paragraph 10 on page 14.
[WPS]Smith
Jones
Paul’s network
[Rescan]
[Wired]
[Manual config]
SSID
Waiting for
Ethernet
Please wait
11
Network settings
Network wizard
Scanning...
Wlan region
Most of Europe
*
Network settings
Keep network connected?

12
Configuration
Connecting to your computer network - cont.
There are two indicator lights incorporated into the RJ-45 connector.
If you have problems with your wired connection, they may help you
to identify the possible cause of the problem.
Green ON = Link established; OFF = no connection
Green Flashing = Data transfer
Yellow ON = 100 Mbits/sec link; OFF = 10 Mbits/sec link
If your network does not support automatic configuration or if you wish
to set it up manually then you should select '[Manual config]' instead
of selecting '[Wired]' in the Network Wizard, then go to page 16.
3. If you plan to use a WiFi connection, you will first need to identify your
network in the list of network names presented by the Network Wizard.
If no networks are found then you may have to get your wireless router
working (please see the instructions supplied with it) or you may be
too far from the router.
When the sound system finds your wireless network, it displays the
Network Name (SSID) for the wireless access point on the screen.
This is a name that is allocated to the access point in your router by
the person who set up the network - for example: 'Jones family' or
'Paul's network'. If the router supports WiFi Protected Setup, then
'[WPS]' will be shown in front of the SSID.
It is possible, and in some locations highly likely, that your sound
system will find more than one wireless network, in which case you
should choose which one you need to connect to.
4. Rotate the Tuning/Select control to see the SSID for each wireless
network that has been found. If your network is shown proceed to step
6 on the next page. If it is not shown then proceed to step 5, also on
the next page.
If you make a mistake at any point, use the Back button to go back
to the previous screen.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Internet radio
Music player
DAB
FM
AUX in
Sleep
Main menu
3-4
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Network settings
Network wizard
Scanning...

13
Connecting to your computer network - cont.
5. If your network is not found, it may be because the router is configured not to broadcast the SSID. You
should then use the Tuning/Select control to highlight and select the '[Manual config]' option in order to
enter the network details manually. This is described in 'Manual Network Configuration', see page 16.
If your network name is being broadcast, and it was not found, then try re-scanning (press the Back button),
and if necessary try moving your sound system to a location closer to your access point / router.
6. When the SSID for the wireless network you wish to connect to is highlighted on the screen, press the
Select control. If WiFi Protected Setup (WPS) was indicated, you will see an additional menu at this point,
otherwise proceed to step 7.
Choose one of the WPS menu options as required for your router (WPS may be via push button, or using
an identification number).
'Push Button' - the display prompts you to press the WPS button on your router and then the Select control
on the sound system. The two devices should then connect with the encryption key sent automatically to
the sound system.
'PIN' - the display shows an identification number which you must enter into your router using a web browser
(refer to your router's user documentation). You should then press the Select control on the sound system.
The two devices should then connect with the encryption key sent automatically to the sound system.
'Skip WPS' - if you wish to enter the encryption key yourself (or if it was previously entered).
If you chose Push Button or PIN the screen will then show 'Connecting...' and then 'Setup wizard completed'.
Press the Tuning/Select control to exit the setup wizard and then go to paragraph 10 on the next page.
7. If your network is configured without an encryption key, the screen should say 'Connecting...', and then
'Setup wizard completed'. Press the Tuning/Select control to exit the setup wizard and show the Main
menu. If this is the case then you have successfully connected your sound system to your network, so
please go to paragraph 10 on the next page.
8. If the screen displays 'Key:', it is because the network is using one of the encryption systems: Wired
Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter the correct WEP or
WPA key into the sound system to allow it to communicate with your wireless network. If you do not have
the WEP or WPA key, then you should obtain it from the person who set up your network. Some wireless
routers may come with an encryption key already set up by the supplier, in which case you should refer
to the documentation provided with it. WPA is used here to also include WPA2.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Network settings
Please wait
Connecting...
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
Push Button
PIN
Skip WPS
WPS Menu
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID

14
Configuration
Connecting to your computer network - cont.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless
routers can also use pass-phrases for WEP but these are not supported by the
sound system. WPA keys are usually set up using a pass-phrase of between 8
and 63 characters. Your sound system accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the
Tuning/Select control. As you rotate the control, the highlight scrolls through
the available characters as well as the three controls on the right. The character
currently highlighted will be entered when you press the Tuning/Select control.
Do this as needed until the complete key has been entered. Remember, WEP
keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper
and lower case characters. You must enter the key exactly or the sound system
will not connect to the network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the Info button and then using the Tuning/
Select control as needed:
select ' ' to erase a character just entered (long press to clear); Info
again to continue
select ' ' when the complete key has been entered
select ' ' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
display will show 'Key: [Set]'. If you have previously entered a different key, you must
clear this by selecting the ' ' symbol. This will remove the '[Set]' indication.
After the final character of the WEP or WPA key has been entered, highlight the '
symbol and press the Tuning/Select control.The screen will show 'Connecting...'
and then 'Setup wizard completed'. Press the Tuning/Select control to the exit
setup wizard. The sound system should now be able to connect to the network.
10. Once you have connected your sound system to the network (and therefore also
to the Internet) it will display the Main menu. Press the On/Standby button to put
the sound system into Standby mode. It should then display the time as obtained
from the Internet. If the time display is not correct for any reason, it can easily be
adjusted later, see page 76, 'Manually setting the clock'.
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123- jones
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
5-9
10
Internet radio
Music player
DAB
FM
AUX in
Sleep
Main menu
9
Network settings
Please wait
Connecting...

15
Connecting to your computer network - cont.
If you have followed the steps on the preceding pages successfully, your sound system will have connected
to your router, and then made a connection to the Internet and set its clock. If this is the case, then you can
try listening to radio stations via the Internet as described on page 20 onwards.
Changing the network connection
In the sections above, you chose how your sound system would be connected to your network, either using
a WiFi connection or using a wired Ethernet cable. From time to time, you may find that you need to connect
to different computer networks. The Network Settings menu allows you to change your sound system’s
network settings, scan for an alternative wireless network, or to manually configure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network profiles' on page 90.
If you have no need to do this, however, please skip to page 20.
Configuring the sound system to use an alternative WiFi connection
1. From the Network Settings menu select 'Network wizard'. This will present you with details of any WiFi
networks that are found. Scroll down the list using the Tuning/Select control to the desired network
name. Press the control to select this network.
The sound system will then use its WiFi system to communicate with the network. Depending on the
settings for the new network you may need to enter an encryption key (see pages 13-14). By default
the sound system will then acquire an IP address and other network settings from the network's router
using DHCP (Dynamic Host Configuration Protocol).
Configuring the sound system to use the wired Ethernet connection
2. Connect your sound system to your router using an Ethernet cable plugged into the RJ-45 socket at
the back of the unit. From the Network Settings menu select 'Network wizard'. This will display a list of
any WiFi networks that are found. Scroll down the list and select the '[Wired]' option.
The sound system will then use its Ethernet connection to communicate with the network. By default
the unit will then acquire an IP address and other network settings from the network's router using
DHCP (Dynamic Host Configuration Protocol).
Last listened
Station list
System settings
Main menu
Internet radio
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
System settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
[WPS]Smith
Jones
Paul’s network
[Rescan]
[Wired]
[Manual config]
SSID
Network settings
Network wizard
Scanning...

16
Configuration
Manual network configuration
If you do not wish to use DHCP for automatic configuration, or if your network is configured with a hidden
SSID, then you will need to enter some network settings manually. (Note - a hidden SSID may prevent
casual observers from detecting your network, but it is not recommended as a means of network security.)
1. From the sound systems Network Settings menu, select 'Manual settings'. You must then choose
whether to connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as many
as nine settings screens, shown by the '1 of 9' progress marker in the top right corner of the display. If
you choose 'Wired' there are five screens and the progress marker will reflect this, although the steps
to set up the network parameters are basically the same.
2. The next menu asks whether you wish to use DHCP to configure your network parameters (IP address,
subnet mask, gateway address, etc.). Unless you are familiar with networking and related terminology,
we recommend that you allow the use of DHCP. Choose 'DHCP enable' unless you need to specify
the network details manually.
If you have chosen 'Wired' and then 'DHCP enable', your sound system should now establish a
connection to the router using the Ethernet cable. Please skip to step 11 on page 18.
If you chose 'Wireless' and 'DHCP enable', please skip to step 6 on page 17 in order to set up the
wireless connection details.
If you chose 'DHCP disable' for either connection method, the next step is to set up the IP address.
3. The manually specified IP address should be chosen to be compatible with the settings in your router
and must be a unique address on your network. If you are using DHCP for some devices and static
(manually configured) IP addresses for others, the IP address used should fall outside the range that
the router may allocate using DHCP. Typically, the first three groups of digits will be the same for all
devices on your network. To enter the IP address, rotate the Tuning/Select control to set the value for
each group of digits and then press the control to enter the value and to move on to the next group.
When the IP address has been entered, the subnet mask should be entered. The subnet mask defines
which parts of the IP address are common across your network. For most small networks the subnet
mask will be 255.255.255.0 and this is entered in the same way.
4. The Gateway address is normally the IP address of the router through which the sound system connects
to the internet and is entered in the same way as the previous addresses.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Connection type
Wired
Wireless
DHCP
DHCP enable
DHCP disable
IP settings
IP address
192 . 168 . 1 . 25
Subnet mask
255 . 255 . 255 . 0
Gateway address
Gateway address
192 . 168 . 1 . 1

17
DNS
Primary DNS
192 . 168 . 1 . 1
Secondary DNS
0 . 0 . 0 . 0
SSID:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
mynetwork
Open
Pre-Shared Key
WPA
WPA2
Authentication
Encryption type
Disabled
WEP
Manual network configuration - cont.
5. In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP address
as your router. In this case the secondary DNS may be left at zero.
To enter the DNS address, rotate the Tuning/Select control to set the value for each group of digits
and then press the control to enter the value and to move on to the next group. Repeat this until all
eight groups of digits have been entered.
If you previously specified 'Wired' and then 'DHCP disable', your sound system should now connect to
the router using the Ethernet cable (in which case skip to step 11).
6. If you specified 'Wireless', the next step is to set up the WiFi connection, starting with the name of the
wireless network (SSID) followed by the encryption options and password.
To enter the SSID, characters are selected and entered using the Tuning/Select control. As you rotate
the control, the radio scrolls through the available characters as well as the three controls on the right.
The character currently highlighted will be entered when you press the Tuning/Select control.
Do this as needed until the complete network name has been entered. The SSID setting is sensitive
to upper and lower case characters and symbols. You must enter it exactly as set up in your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select ' ' to erase a character just entered (long press to clear); Info again to continue
select ' ' when the complete SSID has been entered
select ' ' to cancel and go back to the DNS settings screen
7. Having entered the SSID, you must enter details of the encryption system used on your wireless
network. This should be the same as specified in your router settings. If your network does not use
encryption, then select the 'Open' option. Your sound system should then connect to the network, so
skip to step 11. If your network uses WEP (Wired Equivalent Privacy) select the 'Pre-Shared Key' option
then go to step 8. The remaining options are for WPA or WPA2 (WiFi Protected Access) - see step 9.
8. If you chose 'Pre-Shared Key' in step 7, you should then choose the WEP option. The key should be
entered using only the numbers 0-9 and the letters A-F. The key will be 10 characters long for 64-bit
encryption and 26 characters long for 128-bit encryption. The radio will accept lower-case letters a-f
as equivalent to upper-case A-F. Spaces or special symbols are not permitted in WEP keys.
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
01234ABCDE