Robot Coupe CL60 User manual

Vegetable Processor
Commercial
All Metal
Vegetable
Processor
High Volume Vegetable Prep.
Up to 1,200 lbs. per hour
For high volume processing for a wide range of sizes
and shapes of vegetables and fruits. Magnetic safety
switch. Accommodates 39 different processing
discs. Comes with large lead assembly
and one slicing and one grating disc.
• Four different interchangeable
heads available which permit
machine to adapt to a wide variety
of vegetable processing functions
on a continuous feed basis.
• New heavy-duty 3-phase, 2-speed,
4HP motor; 425 RPM on low
speed, 850 RPM on high speed,
magnetic safety switch.
• Control panel with push-type “high
& low” buttons and “stop” button.
• Compact design, four legs and
special handle facilitates moving.
• Optional stainless steel cart with
castors holds full size food box
(R198) to aid in handling large
volume processing.
• Stainless steel motor base.
• Packed with 2 processing discs
(C446SA & C450GPA) as standard.
• Unit is water resistant, easy to
clean and designed to conform to
strict sanitation standards.
• 1 year warranty on parts and labor.
Robot Coupe U.S.A., Inc.
P.O. Box 16625
Jackson, MS 39236-6625
1-800-824-1646 • [phone]
Fax: [phone]
www.robotcoupeusa.com • e-mail: [email protected]
SPECIFICATIONS ON REVERSE SIDE
“The Inventor & World Leader in Food Processors”
“Series D”
CL60
Shown with
optional R198
Food Tray
Cart
Optional
Bulk Feed
Assembly has
french fry
capability.

Robot Coupe U.S.A., Inc.
P.O. Box 16625
Jackson, MS 39236-6625
1-800-824-1646
[phone]
Fax: [phone]
www.robotcoupeusa.com
e-mail: [email protected]
Distributed by:
Robot Coupe reserves the right to change specifications. Call the factory for latest specifications and recommendations.
© 2003 Robot Coupe U.S.A., Inc. Litho in U.S.A. WKK 06/03
Specifications
STANDARD PACK: Motor base unit with
large lead assemply and two discs, one
1/8" (3mm) slicing disc and one 1/8"
(3mm) medium grating disc.
ELECTRICAL REQUIREMENTS: 4 H.P.,
208/240V, 60Hz, Two-Speed
(425/850 RPM), 5.3/5.8 Amps, Three
Phase. Contact your electrician for local
code requirements. NEMA L15-20
Electrical Plug.
SWITCHING: Control panel with high
and low butons, also a stop button.
MOTOR: Heavy duty, 2-speed, 4 HP, 425 RPM on low
speed, 850 RPM on high speed.
WEIGHT: 150 lbs. approximate shipping wt.
“The Inventor & World Leader in Food Processors” Vegetable Processor
“Series D”
CL60
 
  
  
  
  
  
  
  
  
   ! "#
  
$  
$  
  
 
 
 
  
  
  
  
$  
$  
$  
$  
  
$  
$  
  
  
  
  
 
 
* For Series D machines only **French Fry Kits avaliable for Bulk Feed units ONLY.
OPTIONAL EQUIPMENT: 37 additional processing discs.
Single, free-standing 3-position disc rack or wall-mounted
disc rack. R198 food box cart with container. 3 lead
assemblies – Bulk feed assembly, Angle feed lead, small
lead assembly.
STANDARDS: ETL electrical & sanitation, cETL (Canada)