Rocket Fish RF-G1185 User manual

RF-G1185
QUICK SETUP GUIDE
Legal notices
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Dolby is a registered trademark of Dolby Laboratories.
DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, maybe cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent form that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.”
FCC Warning: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.”
1-year limited warranty
Visit www.rocketshproducts.com for details.
We’re here for you
www.rocketshproducts.com
For customer service, call:
800-620-2790 (U.S./Canada markets)
© 2011 BBY Solutions, Inc., All Rights Reserved.
Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richeld, MN
USA
55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand
names are trademarks of their respective owners.
4-PORT SELECTOR
Connects up to 4 HDMI® sources to 1 HDMI® input
ENGLISH 11-0628
RF-G1185_11-0628_QSG_V1.eps 1 7/25/2011 2:00:40 PMRF-G1185_11-0628_QSG_V1.eps 1 7/25/2011 2:00:40 PM

INPUT 3OUTPUT
Thank you for purchasing this Rocketsh 4-port HDMI Selector. Your selector adds
up to four HDMI inputs to your system. This lets you connect four HDMI source
components, such as Blu-ray/DVD players, cable/satellite/DVR set-top boxes, and
gaming systems, to a single HDMI input jack on an HDTV or projector.
In addition to the exibility of additional HDMI inputs, this product also provides
automatic HDMI port switching. The included remote control is for manual HDMI
port switching when needed.
Features
• Full HD 1080p video compatibility
• Auto HDMI port switching for simple operation
• HDCP compliant to ensure playback of any content
• DTS® HD, Dolby® TrueHD lossless digital audio compatibility
• One front panel HDMI input for easy connection of portable HDMI devices
• 3D video compatibility
• Gold plated connectors for maximum signal transfer and corrosion
resistance
• Remote control for manual HDMI port switching when needed
• Compatibility with CEC enabled HDMI components
NOTE:If you want to watch 3D sources, make sure that your TV or Projector
supports the same HDMI 3D video format as your sources. A 3D image cannot be
delivered to a TV or Projector that does not support 3D video formats. You also
need to use HDMI cables that are compatible with 3D video, such as Rocketsh
high-speed HDMI cables.
Package contents
• 4-port HDMI Selector
• AC power adapter
Setting up your selector
1Using high speed HDMI cables, such as Rocketsh brand HDMI cables,
connect the HDMI output on each source component to one of the HDMI
inputs on your selector.
NOTE: If using this Selector with an A/V Receiver (AVR), connect the source
components to the AVR rst, then connect the AVR HDMI output to the
Selector.
2Connect a high speed HDMI cable from an available input on your HDTV (or
projector) to the HDMI output of your selector.
3Connect the AC power adapter to the DC connector on your selector, then
plug the adapter into a power outlet.
Using your selector
1Press the power button on the remote control or press and hold the
power/select button on your selector for at least two seconds.
2Turn on your TV or projector, then switch to the HDMI input that your
selector is connected to. If you are uncertain how to switch inputs on the TV
or projector, see the documentation that came with your TV or projector.
3Turn on the HDMI source that you want to view. The auto-switching feature
of your selector should automatically switch to the HDMI input the device is
connected to, and the LED for that input should light. However, some HDMI
source devices are not compatible with auto-switching technology. If your
selector does not automatically switch to the correct input, press the
number on the remote control you want to switch to, or repeatedly press
the power/select button on your selector to toggle through the HDMI
inputs until the correct input is selected.
• Remote control and battery
• Quick Setup Guide
1
INPUT 4 23 4
Front Remote
Power/Select
Button (top)
INPUT 3 INPUT 2 INPUT 1OUTPUT
DC5V
Power connector
HDMI Output
(OPTION: HDTV or projector)
HDMI Input
(OPTION: Cable/satellite/DVR set-top box)
HDMI Input
(OPTION: Blu-ray Disc or DVD player)
HDMI Input
(OPTION: Game console)
HDMI Input
(OPTION: Camcorder)
Back
POWER
ON/OFF
SELECT
MODES
RF-G1185
1
3
24
RF-G1185_11-0628_QSG_V1.eps 2 7/25/2011 2:00:40 PMRF-G1185_11-0628_QSG_V1.eps 2 7/25/2011 2:00:40 PM