Rockville RWM1000 Series User manual

RISK OF ELECTRICAL SHOCK.
DO NOT OPEN.
CAUTION: TO PREVENT ELECTRIC SHOCK,
DO NOT REMOVE COVER SCREWS.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.

Problem Solution
No sound or faint
sound
• Verify all sound system connections or adjust
channel volume as needed.
• Verify that the receiver is connected to the mixer/
amplier.
• Turn on transmitter.
• Make sure the batteries are installed correctly.
• Charge or change battery.
• Make sure AC adapter is securely plugged into
electrical outlet.
• Make sure receiver is powered on.
Audio artifacts or
dropouts
• Identify nearby sources of interference (cell
phones, Wi-Fi access points, signal processor,
etc...) and shutdown or remove source.
• Charge or change transmitter battery.
• System must be set up within recommended
range and receiver kept away from metallic sur-
faces.
• Transmitter must be used in line of sight from
receiver for optimal sound.
Distortion Reduce transmitter channel volume.
Sound level
variations when
switching to differ-
ent sources
Adjust transmitter volume as necessary.