RODE Microphones M1-S User manual

(EMC, LVD)
M1-S
Instruction Manual
www.rodemic.com

- 2 -
Introduction
Thank you for choosing the M1-S live dynamic
microphone.
Since its launch the M1 has proven itself
to be arguably the most robust live dynamic vocal
microphone on the market.
Combined with premium sound quality courtesy of
its high-output neodymium capsule and feedback
rejecting pick-up pattern, it’s not hard to see why the
M1 has become the live mic of choice for countless
performers and venues worldwide.
The M1-S offers the same performance and durability
of the M1, with the addition of a lockable switch that
allows the user the freedom to control their own
audio.
Please take the time to visit www.rodemic.com and
register your microphone for a full ten year warranty.
While there you can view studio tips and techniques, as
well as browse a comprehensive range of accessories
for the M1 and other microphones.
Peter Freedman
Microphones
Sydney, Australia

- 3 -
Specifications
Acoustic
Principle:
Dynamic
Polar Pattern: Cardioid
(see graph)
Frequency
Range:
75Hz ~ 18,000Hz
(see graph)
Output
Impedence:
320Ω
Sensitivity: -56dB ± 2 dB re 1V/Pa
(1.6mV @ 94 dB SPL) @ 1 kHz
Output
Connection:
3-pin XLR balanced output
between pin 2(+), pin 3(-) and
pin 1 (ground)
Net Weight: 360g
Dimensions: Length: 171mm (6.73”)
Width: 51.5mm (2.03”)

- 4 -
Specifications
Frequency Response
Polar Response
Accessories
RM1 stand mount (with thread adaptor),
ZP1 zip pouch, M3 screw and flat screwdriver

- 5 -
Features
• Live dynamic vocal microphone
• High output neodymium capsule
• Locking on/off switch
• Gold plated XLR connectors
• Heavy duty metal body
• Feedback rejecting pick-up pattern
• Ten Year warranty*
Using the M1-S
• The M1-S comes complete with a microphone
stand-mount (RM1). This should be used to attach
the microphone to a good quality stand.
The stand-mount includes a thread adaptor
allowing connection to either 3/8” or 5/8”
stand thread.
• Always use a high quality microphone cable and
ensure that it is wired Pin 1 screen, Pin 2 (+), Pin 3 (-).
• We recommend that any connections made to the
mixer or recorder are made with the attenuation
(gain) set to OFF as well as the microphone switch
set to OFF.
• To ensure the lowest noise/distortion your mixer
input gain control should be set so that the Peak
Program Indicator (PPI) LED flashes ON during
peaks of the source (voice/instrument).
If there is no PPI, adjust the input gain while
listening for distortion of the sound. If distortion is
heard, gradually reduce the gain until it is no longer
present.
*Online product registration required.

- 6 -
• Microphone technique, or how to get the sound
you want, requires experimentation.
We suggest that you start with the channel EQ set
to ‘OFF’ or ‘FLAT’ (no boost or cut).
• The M1-S’s primary function
is a live vocal microphone.
When setting it up on stage,
make sure the foldback
monitors are positioned as
pictured here. This will direct
the sound to the vocalist/
presenter and towards the
least responsive section of
the M1-S’s pick up pattern.
• To avoid feedback and make
full use of the microphone’s
pick up pattern, it is best not
to cup your hands over the
head of the microphone.
• The M1-S features an XLR security lock to minimise
theft. To engage the locking system, simply
tighten the locking screw at the rear base of the
microphone when the XLR cable is connected.
Using the M1-S

- 7 -
• The M1-S switch features a lock to prevent any
chance of accidental disabling during performance.
To lock the microphone on, simply rotate the small
screw at the base of the switch to the horizontal
position while it is in the ON position.
• After use the M1-S should be removed from its
stand mount, wiped with a dry, soft cloth and
placed in its protective zip pouch.
Storage
Using the M1-S
Position 1
Mic is off
(unlocked)
Position 2
Mic is on
(unlocked)
Position 3
Mic is on
(locked)

- 8 -
Warranty
All microphones are warranted for one year
from date of purchase. You can extend that to a full
ten years if you register online at www.rodemic.com.
The warranty covers parts and labour that may be
required to repair the microphone during the warranty
period. The warranty excludes defects caused by
normal wear and tear, modification, shipping damage,
or failure to use the microphone as per the instruction
guide.
If you experience any problem, or have any questions
regarding your microphone, first contact the
dealer who sold it to you. If the microphone requires a
factory authorised service, return will be organised by
that dealer.
We have an extensive distributor/dealer network, but
if you have difficulty getting the advice or assistance
you require, do not hesitate to contact us directly.
International
PO Box 6685
Silverwater NSW 2128 Australia
USA
P.O. Box 4189
Santa Barbara, CA 93140-4189
Technical Support
For information and technical support questions contact:
[e-mail]
In the Unites States and Puerto Rico, contact
[e-mail]
In Australia, contact [e-mail]
Anywhere except Australia, the United States and Puerto Rico,
contact [e-mail]