Roland TrueVIS MG-640 User manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual com-
pletely.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please
inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
FA02998 http://www.rolanddg.com/
R1-230126 Copyright © 2023 Roland DG Corporation

Basic Handling Methods................................................................................ 7
Basic Information ...................................................................................................... 8
Part Names and Functions ......................................................................................................... 9
Printer Unit.................................................................................................................... 9
Operation Panel..............................................................................................................14
Display Screen ...............................................................................................................15
About the Media Used.............................................................................................................16
Types of Media ...............................................................................................................16
Conditions for Usable Media ...............................................................................................17
Menu List ............................................................................................................................18
Main Menu ....................................................................................................................18
Function Menu ...............................................................................................................22
Language and Unit Menu ...................................................................................................23
Basic Operations....................................................................................................... 24
Power Supply Operations .........................................................................................................25
Turning the Power On .......................................................................................................25
Turning the Power Off ......................................................................................................27
Precautions When Operating the Power Supply.........................................................................28
Sleep Mode (Power-saving Feature) ......................................................................................29
Setup of Media .....................................................................................................................30
Setup of Roll Media..........................................................................................................30
Setup of Sheet Media .......................................................................................................49
Separating the Media .......................................................................................................62
What to Do First after Installation ..............................................................................................63
Accurately Adjusting the Misalignment of the Ink Landing Position .................................................63
Checking before Output ..........................................................................................................65
LAN (Local Area Network) Settings .......................................................................................65
Preventing Sedimentation in Inks .........................................................................................65
Pausing and Canceling Output ...................................................................................................66
Pausing and Resuming Output .............................................................................................66
Canceling Output ............................................................................................................66
Replacing Ink Cartridges ..........................................................................................................67
Out-of-ink Warnings.........................................................................................................67
Preventing Sedimentation in Inks .........................................................................................67
Output Method ........................................................................................ 68
Printing Method........................................................................................................ 69
Preparations before Printing Output............................................................................................70
Checking the Daily Workflow ..............................................................................................70
Printing Tests and Normal Cleaning.......................................................................................71
Printing Output.....................................................................................................................73
Step 1: Batch Settings for Printing.......................................................................................73
Step 2: Starting Output ....................................................................................................82
Cutting Method ........................................................................................................ 84
Preparations before Cutting Output ............................................................................................85
Step 1: Preventing Pulling of the Media with Undue Force ..........................................................85
Step 2: Adjusting Cutting..................................................................................................86
Cutting Output .....................................................................................................................88
Step 1: Batch Settings for Cutting .......................................................................................88
Step 2: Starting Output ....................................................................................................93
Contents
1

Printing and Cutting Method......................................................................................... 94
Preparations before Printing and Cutting Output.............................................................................95
Step 1: Printing Tests and Normal Cleaning ............................................................................95
Step 2: Adjusting Cutting..................................................................................................97
Printing and Cutting Output......................................................................................................99
Step 1: Batch Settings for Printing and Cutting........................................................................99
Step 2: Starting Output .................................................................................................. 113
How to Cut with Crop Marks........................................................................................115
Preparations before Cutting with Crop Marks ............................................................................... 116
What Is Cutting with Crop Marks? ....................................................................................... 116
Step 1: Printing Tests and Normal Cleaning .......................................................................... 117
Step 2: Adjusting Cutting................................................................................................ 119
Cutting with Crop Marks ........................................................................................................ 121
Step 1: Batch Settings for Cutting with Crop Marks ................................................................. 121
Step 2: Starting Output with Crop Marks ............................................................................. 135
Step 3: Preparations for Cutting Output .............................................................................. 137
Step 4: Starting Cutting Output ........................................................................................ 141
Optimizing Quality and Efficiency ................................................................142
Optimizing the Output Quality .....................................................................................143
Using the Correction Functions ................................................................................................ 144
Adjusting the Misalignment of the Ink Landing Position............................................................. 144
Accurately Adjusting the Misalignment of the Ink Landing Position ............................................... 146
Reducing Horizontal Bands (Feed Correction Function) ............................................................. 148
Configuring Settings to Match the Properties of the Media ............................................................... 150
Adjusting Print Head Height to Match Media Thickness ............................................................. 150
Using Transparent Media ................................................................................................. 152
Using Non-resilient Media ................................................................................................ 153
Using Media That Wrinkles Easily/Does Not Move Smoothly ........................................................ 154
Accurately Adjusting the Cutting Settings ................................................................................... 155
Fine-tuning the Cutting Conditions ..................................................................................... 155
Accurately Adjusting the Cutting-in Amount.......................................................................... 157
Making Adjustments When Cutting the Print Surface ................................................................ 159
Performing Distance Correction during Cutting....................................................................... 164
Cutting to Make It Possible to Cut Corners Attractively (Over Cut) ............................................... 166
Prioritizing the Cutting Settings of This Machine over the Software RIP Settings ............................... 167
Accurately Adjusting the Settings for Printing and Cutting ............................................................... 168
Correcting the Misalignment of Printing and Cutting ................................................................ 168
Correcting the Misalignment of the Printing and Cutting Positions during Cutting.............................. 172
Accurately Adjusting the Settings for Cutting with Crop Marks .......................................................... 174
Aligning the Positions of Cutting with Crop Marks Manually ........................................................ 174
Correcting the Misalignment of Printing and Cutting with Crop Marks (Concurrent Test for Printing
and Cutting with Crop Marks) ..................................................................................... 176
Correcting the Misalignment of Printing and Cutting with Crop Marks (Separate Test for Printing and
Cutting with Crop Marks) .......................................................................................... 180
Correcting the Sensor for Reading Crop Marks........................................................................ 187
Adjusting the Level of the Sensor for Reading Crop Marks According to the Media............................. 190
Resetting the Level of the Sensor for Reading Crop Marks.......................................................... 191
Avoiding Canceling Due to Cleaning during Printing........................................................................ 192
Cleaning during Printing .................................................................................................. 192
Optimizing Work Efficiency.........................................................................................195
Using Presets ..................................................................................................................... 196
Saving the Current Settings in Presets ................................................................................. 196
Loading and Outputting a Preset........................................................................................ 198
Adjusting the Output-start Location .......................................................................................... 199
Contents
2

Setting the Base Point .................................................................................................... 199
Reducing Output Time .......................................................................................................... 201
Speeding Up Output for Narrow Media................................................................................. 201
Using the Media Take-up Unit.................................................................................................. 202
About the Media Take-Up Unit........................................................................................... 202
Other Useful Functions.......................................................................................................... 203
Performing Printing Tests Arranged Horizontally ..................................................................... 203
Optimizing Operation Management ...............................................................................204
Managing the Operations Appropriately and Efficiently ................................................................... 205
Setting the Current Date/Time and Using It for Maintenance...................................................... 205
Displaying the Amount of Media Remaining ........................................................................... 206
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed ............. 208
Printing the Amount of Remaining Media .............................................................................. 209
Determining What Happens When Ink Runs Out ...................................................................... 210
Notifying the User of Ink Exceeding Its Shelf Life .................................................................... 211
Checking the Ink Shelf Life .............................................................................................. 212
Setting the Activation Interval for Sleep Mode (Power-saving Feature) .......................................... 213
Deactivating the Sleep Mode (Power-saving Feature) ............................................................... 214
Managing the Basic Settings of the Printer .................................................................................. 215
Setting the Menu Language and Units of Measurement ............................................................. 215
Viewing System Information ............................................................................................. 216
Returning All Settings to Factory Defaults............................................................................. 217
Maintenance ..........................................................................................218
Introduction...........................................................................................................219
Important Notes on Handling and Use ........................................................................................ 220
Printer....................................................................................................................... 220
Ink Cartridges .............................................................................................................. 220
Basic Maintenance Knowledge ................................................................................................. 222
Types and Timing of Maintenance....................................................................................... 222
Automatic Maintenance Feature and Notes ........................................................................... 223
Measures When the Printer Is Not in Use for a Prolonged Period .................................................. 224
Regular Maintenance ................................................................................................225
Cleaning the Machine ........................................................................................................... 226
Cleaning the Media Path.................................................................................................. 226
Cleaning the Cutting Carriage Roller ................................................................................... 228
Maintenance That Must Be Performed Daily ................................................................................. 229
Maintenance of Ink Cartridges........................................................................................... 229
Printing Tests and Normal Cleaning..................................................................................... 230
Manual Cleaning ........................................................................................................... 232
Cleaning That Must Be Performed Once a Month or More ................................................................. 243
When UV-LED Device Cleaning Is Necessary ........................................................................... 243
How to Clean the UV-LED Devices ...................................................................................... 244
Disposing of Discharged Fluid ......................................................................................250
Precautions for Disposing of Discharged Fluid............................................................................... 251
If the Discharged Fluid Disposal Message Appears .......................................................................... 252
Advanced Maintenance..............................................................................................254
When Normal Cleaning Is Not Effective ...................................................................................... 255
Medium Cleaning Method................................................................................................. 255
Powerful Cleaning Method ............................................................................................... 257
Manual Cleaning.................................................................................................................. 259
When Manual Cleaning Is Necessary .................................................................................... 259
Manual Cleaning Method ................................................................................................. 260
Contents
3

When Uneven Color Issues Occur with White Ink ........................................................................... 272
Ink Circulating Method.................................................................................................... 272
Light Choke Cleaning Method............................................................................................ 273
When Uneven Color Issues Occur with Ink other than White Ink ......................................................... 276
Light Choke Cleaning Method............................................................................................ 276
Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors ................................................. 279
Ink Renewal Method....................................................................................................... 279
Partially Restricting the Print Heads Used for Printing .............................................................. 282
Emergency Measure) Cleaning the Print Head Surface .............................................................. 284
Replacing Consumable Parts........................................................................................286
Replacing Parts for Maintenance .............................................................................................. 287
Replacing the Wiper....................................................................................................... 287
Replacing the Felt Wiper ................................................................................................. 291
Replacing the Blade/Separating Knife ........................................................................................ 294
Replacing the Blade ....................................................................................................... 294
Replacing the Separating Knife.......................................................................................... 301
Inquiries for Consumable Parts and Products................................................................................ 304
Items That You Can Purchase and Replace by Yourself .............................................................. 304
Items That Require Inquiries before Replacement ................................................................... 304
Troubleshooting Methods...........................................................................305
Output Quality Problems ............................................................................................306
Printed results are coarse or contain horizontal stripes ................................................................... 307
Do the print heads cause dot drop-out?................................................................................ 307
Is the print head height appropriate? .................................................................................. 307
Have you carried out feed correction? ................................................................................. 307
Have you carried out ink landing position correction "MEDIA GAP ADJ."? ........................................ 307
Is the printer installed in a level and stable location?............................................................... 307
Is the print mode suitable?............................................................................................... 308
Is the media loaded correctly? .......................................................................................... 308
Are the settings for the "PRESET" menu item appropriate? ......................................................... 308
The media becomes soiled when printed .................................................................................... 309
Do the print heads come into contact with the media? ............................................................. 309
Are the print heads dirty? ................................................................................................ 309
Are the pinch rollers or the media clamps dirty?..................................................................... 309
Colors are unstable or uneven ................................................................................................. 310
Did you shake the ink cartridges before installing them? ........................................................... 310
Is the media wrinkled?.................................................................................................... 310
Was printing paused partway through?................................................................................. 310
Was cleaning performed during printing? .............................................................................. 310
Is the printer installed in a level and stable location?............................................................... 310
Is the media loaded correctly? .......................................................................................... 310
Are the operating parameters set to appropriate values? .......................................................... 311
Are the settings for the "PRESET" menu item appropriate? ......................................................... 311
Are the irradiation windows of the UV-LED devices dirty? .......................................................... 311
Cutting Is Misaligned or Skewed ............................................................................................... 312
Is the media loaded correctly? .......................................................................................... 312
Are the settings for the cutting conditions appropriate?............................................................ 312
Is the length of output too long? ........................................................................................ 312
Are you using media that exhibits large expansion and contraction? ............................................. 312
Is the setting for the "CALIBRATION" menu item (under "CUTTING MENU") correct? ............................ 312
Are the pinch rollers placed on the proper locations?............................................................... 313
Printing and Cutting Are Misaligned........................................................................................... 314
Have you corrected the misalignment of printing and cutting? .................................................... 314
Problems in Cutting with Crop Marks .............................................................................315
Contents
4

Automatic Detection of Crop Marks Fails .................................................................................... 316
Is the media wrinkled or warped? ...................................................................................... 316
Is the media size too large?.............................................................................................. 316
Are you using media that is likely to reflect light?................................................................... 316
Are you using transparent media? ...................................................................................... 316
Printing and Cutting Are Misaligned........................................................................................... 317
Have you corrected the misalignment of printing and cutting with crop marks? ............................... 317
Media Feed Problems ................................................................................................318
Media Wrinkles or Shrinks ...................................................................................................... 319
Is the media loaded and set up straight and securely? .............................................................. 319
Are the media clamps attached?........................................................................................ 319
Is the humidity of the room too high?.................................................................................. 319
Is the media sagging? ..................................................................................................... 319
Media Feeding Is Not Straight.................................................................................................. 320
Is the media loaded and set up straight and securely? .............................................................. 320
Media Feeding Is Not Smooth .................................................................................................. 321
Is some other object coming into contact with the media? ........................................................ 321
Is the media too thick? ................................................................................................... 321
Are the grit rollers dirty?................................................................................................. 321
A Media Jam Occurs! ............................................................................................................ 322
Is an error message displayed? .......................................................................................... 322
Is the media warped or wrinkled? ...................................................................................... 322
Is the height of the print heads too low? .............................................................................. 322
Are the grit rollers dirty?................................................................................................. 322
Are the media clamps attached?........................................................................................ 322
Is the media loaded and set up straight and securely? .............................................................. 322
Is some other object coming into contact with the media? ........................................................ 323
Is the media too thick? ................................................................................................... 323
Machine Problems ....................................................................................................324
The Print Heads Do Not Move .................................................................................................. 325
What to Do First ........................................................................................................... 325
If the Print Heads Still Do Not Move .................................................................................... 325
The printer unit does not run .................................................................................................. 327
Is the power switched on?................................................................................................ 327
Is [SETUP] lit? .............................................................................................................. 327
Are any covers open? ..................................................................................................... 327
Is the top menu displayed?............................................................................................... 327
Is [PAUSE] lit?............................................................................................................... 327
Is a message displayed on the screen? ................................................................................. 327
Are the cables connected? ............................................................................................... 328
Is the LAN routing appropriate? ......................................................................................... 328
Are the LAN settings correct?............................................................................................ 328
Did the software RIP end abnormally? ................................................................................. 328
Has the ink run out?....................................................................................................... 328
Cannot Separate the Media .................................................................................................... 329
Is the separating knife installed?........................................................................................ 329
Is the cut rail installed? .................................................................................................. 329
Setup Cannot Be Completed ................................................................................................... 330
Did you perform manual cleaning?...................................................................................... 330
Messages on the Operation Panel..................................................................................331
Messages .......................................................................................................................... 332
"1 ■ 2 ■ 3 ■ 4 ■ 5■ 6 ■ 7 ■ 8 ■"................................................................................. 332
"CLOSE THE COVER" ....................................................................................................... 332
"SHEET NOT LOADED SETUP SHEET" .................................................................................... 332
"END OF THE SHEET" ...................................................................................................... 332
"EMPTY DRAIN BOTTLE" ................................................................................................... 332
Contents
5

"LIMIT OVER EMPTY DRAIN BOTTLE" .................................................................................... 332
"INSTALL DRAIN BOTTLE" ................................................................................................. 332
"TIME FOR FELT REPLACE" ................................................................................................ 333
"HEAD PROTECTION ACTIVATED"......................................................................................... 333
"REMOVE MEDIA CLAMPS" ................................................................................................. 333
"TIME FOR MAINTENANCE" ................................................................................................ 333
"MAINTENANCE REQIRED" ................................................................................................. 333
"TIME FOR WIPER REPLACE" .............................................................................................. 334
Error Messages.................................................................................................................... 335
"ALIGN POINT POSITION INVALID"........................................................................................ 335
"INK SHELF LIFE EXPIRE" .................................................................................................. 335
"CROPMARK ERROR NOT FOUND" ........................................................................................ 335
"CAN'T PRINT CROP CONTINUE?"......................................................................................... 336
"TEMPERATURE IS TOO HIGH **ﾟC" ...................................................................................... 336
"SERVICE CALL ****" ........................................................................................................ 336
"SHEET TOO SMALL CONTINUE?" ......................................................................................... 336
"SHEET SET ERROR SET AGAIN" .......................................................................................... 336
"TEMPERATURE IS TOO LOW **ﾟC" ....................................................................................... 337
"DATA ERROR CANCELING..." ............................................................................................. 337
"PINCHROLL ERROR LOWER PINCHROLL" ............................................................................... 337
"PINCHROLL ERROR INVALID RIGHT(LEFT) POS" ....................................................................... 337
"PINCHROLL ERROR 2ND FROM RIGHT" ................................................................................. 337
"WRONG CARTRIDGE 12345678" ......................................................................................... 337
"AVOIDING DRY-UP TURN POWER OFF".................................................................................. 337
"SET HEAD HEIGHT TO ****"............................................................................................... 338
"CANCELED FOR PUMP PROTECTION" ................................................................................... 338
"MOTOR ERROR TURN POWER OFF" ..................................................................................... 338
Appendix...............................................................................................339
Operations When Moving the Unit .................................................................................340
Preparing to Move the Machine ................................................................................................ 341
Step 1: Removing Media and the Blade Holder....................................................................... 341
Step 2: Circulating the Ink (Only When Using White Ink)........................................................... 343
Step 3: Removing the Ink That Has Collected below the Wiper ................................................... 344
Step 4: Discarding the Discharged Fluid .............................................................................. 346
Step 5: Secure the print heads in place using the retainer. ....................................................... 347
Step 6: Reinstalling the Machine ....................................................................................... 348
Main Specifications ..................................................................................................349
Printing/Cutting Area ........................................................................................................... 350
Maximum Area ............................................................................................................. 350
Maximum Printing Area When Using Crop Marks ...................................................................... 351
Media Separation Location during Continuous Printing .............................................................. 352
About the Blade.................................................................................................................. 353
Memo...................................................................................................................354
About this Manual................................................................................................................ 355
Contents
6

Basic Handling Methods
7

Basic Information
Part Names and Functions.............................................................................. 9
Printer Unit......................................................................................... 9
Operation Panel ..................................................................................14
Display Screen ....................................................................................15
About the Media Used .................................................................................16
Types of Media ....................................................................................16
Conditions for Usable Media....................................................................17
Menu List.................................................................................................18
Main Menu .........................................................................................18
Function Menu ....................................................................................22
Language and Unit Menu ........................................................................23
8 Basic Information

Printer Unit
Front
FUNCTION
ENTER
PAUSE
BASE
SET UP BUSY
MENU
No. Name Function overview
Cartridge slots The location where ink cartridges are installed.
Front cover Open this when necessary, such as when loading media. In all
other situations, keep the front cover closed.
Loading lever (front) Operate this when you load media.
Operation panel The panel containing the buttons used to operate the machine.
P. 14Operation Panel
Left cover (top) and left cover (bottom) Open these when you perform maintenance.
Right cover Open this when you perform maintenance.
Front UV shield Blocks the light from the UV lamp.
Part Names and Functions
Basic Information 9

Rear
No. Name Function overview
Loading lever (rear) Operate this when you load media.
Media holders
Use these when you load media.Shaft
Media stays
Rear UV shield Blocks the light from the UV lamp. If it is difficult to load the
media, open the UV shield, but close it when you are finished
loading the media. Printing is not possible with the UV shield
open.
Drain bottle Discharged fluid is stored in this bottle. When discharged fluid is
nearly overflowing from the bottle, an error is displayed and
printing is not possible.
Part Names and Functions
10 Basic Information

Side
No. Name Function overview
Main power switch Switch the main power on/off.
Power-cord connector Use this to connect the power cable.
Ethernet connector Use this to connect an Ethernet cable.
Part Names and Functions
Basic Information 11

Front Cover Interior/Print Head Area
No. Name Function overview
Print-head carriage The print heads are inside here.
UV-LED device Shines the UV light used to cure the ink.
Cutting carriage The blade and the separating knife are inside here.
Grit roller This is one of these rollers that feed the media.
Pinch roller
(left pinch roller, right pinch roller, and middle pinch
roller)
These clamp the media when the loading lever is lowered.
These rollers are called the left pinch roller, the right pinch
roller, and the middle pinch roller according to their positions.
Blue stickers are affixed to the left and right pinch rollers.
Media clamp This clamps the edge of the media to keep it from coming
loose. It also prevents fuzz on the cut edge of the media from
touching the print heads.
Part Names and Functions
12 Basic Information

No. Name Function overview
Grit patterns This indicates the location of a grit roller. When loading me-
dia, be sure to place the pinch rollers within the ranges indi-
cated by these patterns.
Blade protector This is the path that the blade takes during cutting. It protects
the tip of the blade.
Platen This is the path over which the media passes. A suction fan
that keeps the media from coming loose is built in.
Apron Smoothly conveys the media that is being transported.
Wiper Cleans the print heads during automatic cleaning and in similar
situations.
If a Cover Opens during Operation
If the front cover, left cover, right cover, or rear UV shield (hereinafter these items are all referred to as
the "cover") opens during an output operation, the machine makes an emergency stop. When an emergen-
cy stop occurs, a message prompting you to close the cover appears on the screen. Close the covers as
directed in the instructions shown on the screen.
When the cover is closed, you will be able to continue the operation.
If you cannot continue the operation even after you close the cover, a nonrecoverable error may have oc-
curred.
RELATED LINKS
・ P. 335Error Messages
Part Names and Functions
Basic Information 13

Operation Panel
W 1600mm
Part Name Details Notation in this man-
ual
W 1600mm
Display screen This displays various setting menus and
other information.
Sub power switch This switches the printer on and off. (To
switch the printer off, hold down the
switch for one second or longer). The
light flashes slowly when the machine is
in sleep mode.
ENTER key Use this for such tasks as enabling set-
ting values.
[ENTER]
MENU key Press this to enter the menus for vari-
ous settings.
[MENU]
FUNCTION key You press this when entering the setting
menu for cleaning of the print heads,
printing tests, and so on.
[FUNCTION]
PAUSE key This pauses the printing operation. It
lights when operation is paused.
[PAUSE]
Cursor keys Use these to select settings for menu
items, to move the media, and for oth-
er such operations.
[◀][▼][▲][▶]
BUSY light This lamp lights up during printing and
other such operations.
[BUSY]
SETUP light This lights when media has been loaded
correctly.
[SETUP]
BASE POINT light This lights when the base point (the
output-start location) has been set.
[BASE]
Part Names and Functions
14 Basic Information

Display Screen
IP ADDRESS
255.255.255.255
OVER CUT
ENABLE DISABLE
Cursor Displays the setting to be changed. You can move it with the cursor keys.
Direction mark You can select settings and switch screens by pressing the cursor keys indi-
cating directions.
ENTER mark Press [ENTER] to set the selected setting or execute the processing.
Present value The present value (before change) is displayed.
Setting value Select the setting you want to set (after change).
Part Names and Functions
Basic Information 15

Types of Media
In this manual, the paper used for output is called "media." The two main types of media used in this
machine are shown below.
• Roll media: Media wound onto a paper tube
• Sheet media: Media not wound onto a paper tube such as standard-size media
Various paper types of roll media and sheet media are selectable according to your purpose. For detailed
information about each media, contact your media supplier.
About the Media Used
16 Basic Information

Conditions for Usable Media
This machine cannot print on every kind of media. When selecting media, be sure to carry out testing
in advance to make sure that satisfactory printing results are obtained.
Size
64-inch model 30-inch model
Width *1 210 to 1,625 mm
(8.3 to 64 in.)
182 to 762 mm
(7.2 to 30 in.)
Cuttable media thickness*1 0.08 to 0.22 mm (3.2 to 8.6 mil; depends on the material of the media)
Maximum media thickness (including back-
ing paper)*1
When performing printing only: 1.0 mm (39.4 mil)
When performing cutting: 0.4 mm (15 mil)
Maximum roll outer diameter 210 mm (8.2 in.)
Paper tube (core) inner diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
*1 Applies to both roll and sheet media
Maximum Roll Weight
• 64-inch model: 40 kg (88 lb.)
• 30-inch model: 25 kg (55 lb.)
If using the take-up unit, this specification depends on the conditions of the take-up unit.
MEMO
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
About the Media Used
Basic Information 17

Main Menu
Press [MENU].
(*1) (*2)
NO. 3 NO. 4
0 0
NO. 1 NO. 2
0 0
5'60#/'
NAME8
5'60#/'
NAME1
5+/2.'5'66+0)
ޓޓ
TIME TO CL.
HIDE SHOW
(7..9+&6*5
(7..1((
8#%77/219'4
#761
5-'9+0)%144
'0#$.''0#$.'
'&)'&'6'%6+10
'0#$.''0#$.'
REMOVE
/'&+#%.#/25
SETTING
0.00% +0.05%
&'6#+.5'66+0)
5'66+0)
&'6#+.5'66+0)
6'5624+06
SAVE
NAME8
SAVE
NAME1
LOAD
NAME8
LOAD
NAME1
PRESET
/'&+#)#2#&,
6'5624+06
*'#&*'+)*6
*+)*.19
57$/'07
(#%614;&'(#7.6
SUB MENU
TIME TO CL.
57$/'07
(7..9+&6*5
57$/'07
8#%77/219'4
57$/'07
5-'9+0)%144
57$/'07
'&)'&'6'%6+10
CALIBRATION
SETTING
CALIBRATION
6'5624+06
/'&+#)#2#&,
&'6#+.5'66+0)
/'&+#)#2#&,
5+/2.'5'66+0)
PRESET
SAVE
PRESET
LOAD
PRESET
NAME1
MENU
SUB MENU
MENU
*'#&*'+)*6
MENU
CALIBRATION
MENU
MEDIA GAP ADJ.
MENU
PRESET
MENU
/'&+#5'66+0)
Menu List
18 Basic Information

(*3)
)#6'9#;#&&4
XXX.XXX.XXX.XXX
SUBNET MASK
XXX.XXX.XXX.XXX
IP ADDRESS
XXX.XXX.XXX.XXX
MAC ADDRESS
XXXXXXXXXXXX
)#6'9#;#&&4
XXX.XXX.XXX.XXX
SUBNET MASK
XXX.XXX.XXX.XXX
IP ADDRESS
XXX.XXX.XXX.XXX
'/26;/1&'
5612%106
SETTING
'0#$.'&+5#$.'
INTERVAL
15min 15min
CLOCK
6+/'
CLOCK
&#6'
NETWORK
MAC ADDRESS
NETWORK
)#6'9#;#&&4
NETWORK
SUBNET MASK
NETWORK
IP ADDRESS
FIRMWARE
Ver. X.XX
INK
XXXX XXXX XXXX
5'4+#.01
XXXXXXX
MODEL
XX-XXX
6'5624+06215
5%#0(''&
MAINTENANCE
4'2.#%'-0+('
MAINTENANCE
4'2.#%'('.6
MAINTENANCE
4'2.#%'9+2'4
+0-%10641.
.+)*6%*1-'%.
+0-%10641.
+0-4'0'9#.
+0-%10614.
%+4%7.#6'+0-
+0-%10641.
'/26;/1&'
SLEEP
SETTING
SLEEP
INTERVAL
CLOCK
6+/'
CLOCK
&#6'
1 2 3 4
5 6 7 8
5;56'/+0(1
0'6914-
5;56'/+0(1
(+4/9#4'
5;56'/+0(1
+0-
5;56'/+0(1
5'4+#.01
5;56'/+0(1
/1&'.
57$/'07
6'5624+06215
SUB MENU
MAINTENANCE
57$/'07
+0-%10641.
SUB MENU
SLEEP
SUB MENU
CLOCK
MENU
+0-4'/#+0+0)
MENU
5;56'/+0(1
Menu List
Basic Information 19