rollease acmeda AUTOMATE MT01-2101-069002 User manual

AUTOMATE™
Modular Curtain Motor
433 MHZ
BI-DIRECTIONAL
ELECTRONIC
LIMIT
FAVORITE
POSITION
LEVEL
CONTROL
FEATURES:
AUTOMATE™ | ARC™ Curtain motor is compatible with popular drapery track systems for
easy incorporation of curtains into the ARC motorized platform. The Soft Touch feature
enables manual operation when needed.
The AUTOMATE modular curtain motor now offers the option to power the motor with a
battery or continuous AC.
INSTR. AUTOMATE_MODULAR CURTAIN MOTOR_V0.4_JANUARY 2020
SOFT TOUCH QUIET
OPERATION
MT01-2101-069002
SELECTABLE
RPM
• Electronic Torque sensing “Auto-set” Limits
• 433 MHz Bi-Directional RF Communication
• Leveling Control
• Inverted or Standard Mount
• Favorite Position
• Soft start / stop
• AC or Battery powered option
• Soft touch control
• Speed Control
• Top exit option for power cord

2 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
CONTENTS
1 CURTAIN MOTOR SPECIFICATIONS 5
2 TRACK & BELT DEDUCTIONS 5
3 WIRING (AC MODULES) 6
3.1 US Motor (120V) 6
3.2 US Motors (120V) + Field Plug 6
4 ASSEMBLY 7
4.1 Attaching and removing the motor 9
4.2 Attaching and removing the battery or AC module 10
5 CHARGING 11
6 P1 BUTTON FUNCTIONS 12
6.1 Motor State Test 12
7 INITIAL SET UP 13
7.1 Pair motor with controller 13
7.2 Check/ Change motor direction (initial set up) 13
7.2.1 Check/ Change motor direction (initial set up) 14
7.3 Auto Set Limits 14
8 ADJUSTING LIMITS 15
8.1 Adjust open limit 15
8.2 Adjust close limit 15
8.3 Delete limits 16
9 CONTROLLERS AND CHANNELS 16
9.1 Using motor P1 button 16
9.2 Using existing controller to add a new controller or channel 17
9.3 Using pre-existing controller to add or delete a controller or channel 17
10 FAVORITE POSITIONING 18
10.1 Set a favorite position 18
10.2 Send to favorite position 18
10.3 Delete favorite position 18

3 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
CONTENTS
11 ADJUST MOTOR SPEED 19
11.1 Increase motor speed 19
11.2 Decrease motor speed 19
12 SOFT TOUCH FUNCTION 20
12.1 Operating with Soft Touch Function 20
12.2 Turn soft touch function on/off 20
13 BATTERY CHECK FUNCTION 21
13.1 Send curtain to battery charge level 21
14 RS485 COMMUNICATION 21
14.1 Enable RS485 communication 21
14.2 Disable RS485 communication 22
14.3 RS485 Failure 22
15 SLEEP MODE 23
15.1 Enter Sleep Mode 23
15.2 Exit Sleep Mode 23
16 EXTERNAL LOW VOLTAGE SWITCH MODE 24
16.1 Two Button Spring Return Switch (Default Mode) 24
16.2 Three Button Spring Return Switch 24
16.3 Single Button Spring Return Switch 25
17 TROUBLESHOOTING 26

4 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
SAFETY INSTRUCTIONS
WARNING: Important safety instructions to be read before installation.
Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.
CAUTION
• Do not expose to moisture or extreme temperatures.
• Do not allow children to play with this device.
• Use or modification outside the scope of this instruction manual will void warranty.
• Installation and programming to be performed by a suitably qualified installer.
• For use within curtains and drapes.
• Use only Rollease Acmeda hardware.
• Before installation, remove any unnecessary cords and disable any equipment not needed for powered operation.
• Ensure torque and operating time is compatible with end application.
• Do not expose the motor to water or install in humid or damp environments.
• Motor is to be installed in vertical application only.
• Do not drill into motor body.
• The routing of cable through walls shall be protected by isolating bushes or grommets.
• Ensure power cable is clear and protected from moving parts.
• If cable or power connector is damaged do not use.
• Ensure all mechanical connections are secure.
Important safety instructions to be read prior to operation.
• It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.
• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
• Keep remote controls away from children.
• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.
• Keep motor away from acid and alkali.
• Keep clear when in operation.
Do not dispose of in general waste.
5005833

5 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
1 CURTAIN MOTOR SPECIFICATIONS
Code MT01-2101-069002 MT03-0305-069004 MT03-0305-069005 MT03-0305-069006
Description Modular Curtain Motor Battery Module AC Module 10' Cord + Plug AC Module 30' Cord
Region AU / EU / US AU / EU / US US US
Power Cable Length 3m [ 10' ] 9.1m [ 30' ]
Voltage Output -14.4V DC
Voltage Input 15V DC -
Capacity -2600 mAh
Running Time 12 min *
Current 1.3 A -
Consumption 20 W 37.44 Wh
Charge Voltage -5V DC (Micro USB) - -
Protection Class
Torque 1.2 Nm
Speed 80 | 100 | 120
Frequency 433.92 MHz
Sound Level 44 dB
0.83 Kg 0.27 Kg 0.32 Kg 0.64 Kg
1.83 lbs 0.60 lbs 0.71 lbs 1.41 lbs
RF Protocol ARC
RF Modulation FSK
RF Signal Range 15m [ 49 ft ]
Limit Switch Type Electronic
Limit Range ∞
Insulation Class
Life Cycle Testing
Charge Time -8 hrs @ 2A - -
Solar Panel Gen2 -5V USB Compatible - -
Notes
Motor/Battery protection activates when battery voltage reaches 13.5V DC (motor stops when battery is flat)
12min run time should be 4min - Dooya to confirm after testing & compliance
120 RPM is Default speed in operation ( 80 RPM is defult speed during limit setting )
Charge time is based on typical 5V / 2A charge rate of fully discharged battery, actual time may vary between batteries
10,000 Cycles| 50 Kg | Upto 11m Track
-
-
36 W
2.0 A
-
-
0 - 60 °C
32 - 140 °F
Temp Working Range
Class A
MODULAR CURTAIN MOTOR SPECIFICATIONS
IP40
-
-
-
-
18V DC
110V AC 60 Hz
Weight
-
-
-
-
2 TRACK & BELT DEDUCTIONS
TRACK LENGTH BELT LENGTH BELT CHECK LENGTH
OL - 118mm (4.65") (OL x2) + 6mm (0.24")
MT03-0401-xxx004 MT03-0401-xxx013 OL - 92mm (3.62") (OL x2) + 2mm (0.08")
OL - 120mm (4.72") (OL x2) + 8mm (0.31")
MT03-0401-xxx014 Somfy Return Pulley OL - 90mm (3.54") (OL x2) + 6mm (0.24")
NOTES :
1. Above figures are for STRAIGHT TRACKS only
2. Deductions are constant across centre close and one way configurations
DRIVE UNIT RETURN UNIT
120mm (4.72")
MT03-0401-xxx004 (x2)
ONE WAY & CENTRE CLOSE
MODULAR CURATIN MOTOR - TRACK & BELT DEDUCTIONS
TYPE
S TRACK
B TRACK
MT03-0401-xxx014 (x2)
123mm (4.84")
Notes
Motor/Battery protection activates when battery voltage reaches 13.5V DC (motor stops when battery is flat)
120 RPM is Default speed in operation ( 80 RPM is defult speed during limit setting )
Charge time is based on typical 5V / 2A charge rate of fully discharged battery, actual time may vary between batteries

6 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
3 WIRING (AC MODULES)
1
2
Disconnect the mains power supply.
Connect the motor according to the information in the table below.
Ensure cable is kept clear of fabric.
Power OFF
3.1 US Motor (120V)
MOTOR POWER NEUTRAL LIVE EARTH POWER CORD LENGTH
MT03-0305-069005
120V AC / 60Hz White Black N/A
10 ft (3m)
MT03-0305-069006 30 ft (9.1m)
MT03-0305-069005 MT03-0305-069006
2
1
Connect the motor according to the information in the table below.
Ensure cable is kept clear of fabric.
FIELD PLUG POWER NEUTRAL LIVE EARTH
MTAC- FIELDPLUG 120V AC / 60Hz White Black Green
Field Plug
3.2 US Motors (120V) + Field Plug

7 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
4 ASSEMBLY
SYSTEM INDEX:
GENERAL SCHEMATIC
1. Motor End Pully
1b. Overlap Return Pulley
2. Curtain Track
3. Modular Curtain Motor
4a. Battery
4b. AC Power Adapter
4c. AC Power Adapter (Long Cable)
1.
2.
3.
4a.
4b.
4c.
1.
1b.

8 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
STEP 2:
Assemble drive belt attachments and attach drive housing to track.
STEP 3:
Assemble Brackets, Runners, Stoppers & Idler Drive Unit Cover.
STEP 4:
Assemble Curtain Motor to drive housing.
Ensure Fixing Pin is engaged securely and motor is secured to housing.
1. Install Track Assembly NOTE: AC Module power cable may be shortened
and/or routed along the motor body and held in
place with cable ties. This requires using a field
installed plug to replace the motor grounding plug.
2. Attach Motor to drive pulley 3. Attach Battery to motor (Or AC Module)
STEP 1
Install drapery drive belt into new drive housing.
NOTE: DISASSEMBLE EXISTING DRAPERY TRACK PRIOR TO FOLLOWING ASSEMBLY STEPS
Repeat steps 1-2 for Idler Side
4 ASSEMBLY
The Automate Modular Curtain Motor works with most major drapery track systems. Follow the below instructions to simply retrofit
with the Drive Pulley* to an existing track *Drive Pulley Available Separately

9 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
4 ASSEMBLY
4.1 Attaching and removing the motor
STEP 1
Slide the lock button fully left against the spring pressure force
STEP 1
Slide the lock button fully left against the spring pressure force
STEP 2
Pull the Motor away from the Drive Pulley
STEP 2
Align and engage the Motor with the Drive Pulley as shown.
STEP 3
Push to Lock Button fully to the right to ensure they two are
securely attached.
STEP 4
CHECK the Motor and Pulley are securely attached by trying to
pull them apart.
ATTACHING THE MOTOR TO DRIVE PULLEY
REMOVING THE MOTOR FROM THE DRIVE PULLEY

10 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
4 ASSEMBLY
4.2 Attaching and removing the battery or AC module
STEP 1
Slide the lock button fully left against the spring pressure force
STEP 1
Slide the lock button fully left against the spring pressure force
STEP 2
Pull the battery or AC modlue away from the motor
STEP 2
Align and engage the Battery or AC Module with the Motor as
shown.
STEP 3
Push to Lock Button fully to the right to ensure they two are
securely attached.
STEP 4
CHECK the Motor and Battery (or AC Module) are securely
attached by trying to pull them apart.
ATTACHING THE BATTERY OR AC MODULE TO THE MOTOR
REMOVING THE BATTERY OR AC MODULE FROM THE
MOTOR

11 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
5 CHARGING
Charge battery using 5V Micro USB
Important:
Before first use, charge battery fully until LED indicator turns Green (Solid)
Solid Red = Charging
Solid Green = Fully Charged
Battery Charge LED Indicator

12 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
P1 Button RJ45
Antenna Hole
LED
GREEN LED
Activate Pairing Mode
Approx.
Approx.
Approx.
Sleep Mode
Enter Setting Mode
Approx.
Reset To Factory Settings
Approx.
Approx.
Hold P1 button on motor head.
10
10
Approx.
Approx.
Approx.
Approx.
6 P1 BUTTON FUNCTIONS
P1 Press Condition Function Achieved Visual Feedback Audible
Feedback Function Described
Short
Press then
Release
(<2 sec)
If limit is NOT set None No Action None No Action
If limits are set
Operational control of
motor, run to limit. Stop if
running
Motor runs None
Operational control of motor
after pairing and limit setting
is completed first time
If motor is in “Sleep
Mode” & limits are set
(Refer to Sec.10)
Wake and control
Motor wakes
and runs in a
direction
None Motor is restored from Sleep
mode and RF control is active
This table describes the function of a short P1 button press/release(<2 seconds) depending on current motor
configuration.
6.1 Motor State Test

13 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
7 INITIAL SET UP
7.1 Pair motor with controller
Consult user manual for your
controller for information on
selecting channel.
Hold P1 button on
motor head.
Select channel on
controller.
Hold STOP on
controller.
Approx.
Motor Response Motor Response
Motor is now in setup mode and ready for setting limits
IMPORTANT
Notes:
• When limits are not set only one remote channel can be paired with the motor
• When limits are set, up to ten channels can be paired with the motor
.
Reversing motor direction using this method is only possible
during initial set-up
To check travel direction of shade, press UP or
DOWN on controller.
Quick Press = Step
Long Press = Continuous Travel
To reverse shade direction, hold both UP and
DOWN.
Until the motor responds.
Motor Response
IMPORTANT
OR
7.2 Check/ Change motor direction (initial set up)
Approx.
P1

14 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
7.2.1 Check/ Change motor direction (initial set up)
Press P1 on Motor for 10 seconds to enter setting mode
The AUTOMATE Modular Curtain motor features automatic limit detection. Once the motor is attached to a
fabricated, installed track, limits can be set with a few simple actions.
Note:
Changing motor direction after initial set up (with limits already set) will clear the limits.
Open and close the curtain to re-set the limits automatically.
To reverse direction, hold both
UP and DOWN. Until the motor
responds.
Approx.
Approx.
Motor Response Motor Response
P1
Approx. Approx. 10 Approx.
7.3 Auto Set Limits
Press the UP or DOWN buttons on controller.
Carrier will run to the end of the track.
When carrier has reached the end of the
track, it will automatically set limit there.
Repeat for opposite end.
Motor Response
OR
To verify limits were successfully set, press up or down to run to limit. Motor should now function with slow
start/slow stop feature. After the limits are set, the motor will only move in the set limit range. If the motor
encounters a new obstacle a maximum of THREE TIMES at the same position, the limit will automatically reset.
IMPORTANT
Initial set-up is now complete
Note: If the motor encounters an obstacle, collision detection will stop the motor to prevent damage.

15 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
8 ADJUSTING LIMITS
8.1 Adjust open limit
8.2 Adjust close limit
Hold UP and STOP on
controller.
Move curtain to the desired
open position by pressing
the UP or DOWN button.
To save desired open limit,
hold UP and STOP.
SECS
5
Approx.
SECS
5
Approx.
Motor Response Motor Response
OR
Hold DOWN and STOP
on controller.
Move curtain to the desired
closed position by pressing
the UP or DOWN button.
To save desired close limit,
hold DOWN and STOP.
Motor Response Motor Response
SECS
5
Approx. SECS
5
Approx.
OR
Notes:
• Once in limit adjustment mode, button selection on the remote must be made within 2 minutes, if not,
motor will exit adjustment mode.
• To exit limit adjustment mode without making changes, press P1 or P2 and limits will remain unchanged.

16 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
8.3 Delete limits
Press P2 on
controller Press DOWN
on controller
Hold P1 button on motor
head.
Press P2 on
controller
Hold STOP on controller to add or remove
Motor Response Motor Response
Motor Response
Motor Response
Motor Response
9 CONTROLLERS AND CHANNELS
9.1 Using motor P1 button
Approx.
P1

17 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
A= Existing controller or channel (to keep)
B= Controller or channel to add or remove
A= Existing controller or channel (to keep)
B= Controller or channel to add or remove
9.2 Using existing controller to add a new controller or channel
9.3 Using pre-existing controller to add or delete a controller or channel
Press P2 on
controller A
Press P2 on
controller A
Press P2 on
controller A
Press P2 on
controller A
Press STOP on the new
controller to add it
Press P2 on
controller Bto
remove it
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response
Consult user manual for your controller or sensor
Consult user manual for your controller or sensor
IMPORTANT
IMPORTANT

18 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
10 FAVORITE POSITIONING
10.1 Set a favorite position
10.2 Send to favorite position
10.3 Delete favorite position
Move curtain to desired position by pressing the UP or DOWN button on the controller.
Press P2 on controller. Press STOP on controller.
Press STOP on controller.
Press STOP on controller.
Move shade to the desired position by pressing the UP or DOWN button on the controller.
Motor Response Motor Response Motor Response
OR
Approx.
Press P2 on controller. Press STOP on controller. Press STOP on controller.
Motor Response Motor Response Motor Response

19 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
11 ADJUST MOTOR SPEED
Notes:
• There are three speed settings (80,100 & 120 RPM).
• With limits set, the default speed is MAXIMUM speed.
• If motor responds to the inputs below with two quick beeps, the speed setting is already at the maximum
or minimum speed trying to be set.
• When motor limits are not set, default speed is minimum.
11.1 Increase motor speed
11.2 Decrease motor speed
Press P2
Press P2
Press UP
Press DOWN
Press UP
Press DOWN
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response

20 | Automate™Programming Instructions | Modular Curtain Motor ROLLEASE ACMEDA
12 SOFT TOUCH FUNCTION
The AUTOMATE Curtain Motor exhibits a built-in function which enables the motor to be initiated by
hand-draw. When the fabric is displaced more than 10cm by hand-draw, the motor continues to move towards
the drawn direction, until the limit is reached.
The Soft Touch Function can be toggled on and off by pressing the P1 button for 10 seconds, followed by the
STOP button.
12.1 Operating with Soft Touch Function
12.2 Turn soft touch function on/off
Hand-draw curtain
fabric 10cm to initiate
Soft Touch function
OPEN CLOSED
Continuously hold P1 button on
motor head for 10 seconds
Press STOP on controller to switch soft touch
function on or off.
Motor Response Motor Response
P1
Approx. Approx. 10 Approx.