Rook SMART LOCK User manual

SMART
DOOR LOCK
Available on Apple & Google Play Store
Owner’s Manual
APP CONTROL PASSCODE FINGERPRINT KEY FOB 2 SPARE KEYS
EXPERT 24/7/365 SUPPORT: [e-mail]
ROOK SMART™

3
TABLE OF CONTENS
Included in The Box
Information & Safety Warnings
Sales & Service Terms
Installation Steps
Operation Testing
System Details
4
5
6
7
15
15

4
Included in The Box
ROOK APP
MANUAL
SMART LOCK
INSTRUCTIONS
20mm 20mm 10mm 10mm 45mm
1 Pcs
FRONT PANEL
1 Pcs
BACK PANEL
1 Pcs
MOUNTING PLATE
1 Pcs
DEADBOLT LATCH
1 Pcs
STRIKE PLATE
1 Pcs
CYLINDER
2 Pcs
BACK UP KEYS
2 Pcs
RF KEY FOBS
1 Pcs
DRILL HOLE
DRAWING (OPTIONAL)
1 Pcs
APP MANUAL,
ACCESS VIA QR CODE
1 Pcs
LOCK MANUAL
4 Pcs
SCREW A
1 Pcs
SCREW B
1 Pcs
SCREW C
1 Pcs
SCREW D
3 Pcs
SCREW E
3 Pcs
SOLENOID

5
Information & Safety Warnings
Introduction
This user manual will guide you through the functions and usages of the ROOK™
Smart Lock. It is important that you follow the instructions. Please consult this
manual before you attempt to use this lock. If you have any questions that we
haven’t answered by this manual or in need of non-routine service, please get in
touch with our service team. We’re available 24/7 at [e-mail]
General Use
•
•
•
•
•
Verify that all parts of the lock are accounted for. If any parts are missing,
please contact us at [e-mail]
There is protective film on the front touch panel, please remove the film after
installation. The film may get in the way of the sensors, so removing the film is
a must.
Should you have any problem, please contact our team. We’ll be happy to help.
Never apply any cleaner directly to any part of this lock. Only use clean water
or mild cleaner on a soft non-abrasive cloth when cleaning.
Potential shock warning: Do not allow water or liquids to get into the lock’s
electric parts.

6
Sales & Service Terms
PLEASE READ THE MANUAL CAREFULLY BEFORE USE!
Limited 2-Year Electronic Warranty Limited
Lifetime Mechanical and Finish Warranty.
This product comes with a 2-Year Limited Warranty on Electronic Parts and a
Limited Lifetime Mechanical and Finish Warranty against defects in materials
and workmanship under normal use to the original residential user. You must
register for this Warranty within 7 days of receiving your ROOK™ Smart Lock.
Help Us Continue to Improve Our Instructions:
•
•
•
•
Any error or question in our manual or sales terms, please feel free to contact
us at [e-mail]
It is forbidden to copy our manual and for other usage, except the authorized
company and users. At this moment, only Prime Proximity, LLC is the sole
manufacturer and provider of ROOK™ Smart Home Devices.
Please do not take the lock apart if you are not a technician, if necessary,
please make the operations under the guide of technician.
Notice: After changing the battery, please be mindful of how you dispose of
your batteries. We recommend and suggest that you kindly dispose of the
batteries in accordance to your local waste management ordinances.

7
Installation Steps
STEP 1 PREPARATION
Check the door’s dimensions - this will tell you if you need to expand the deadbolt
mechanism. The ROOK™ Smart Lock mechanism is expandable and can be installed
on any door!

8
STEP 2 INSTALLING DEADBOLT AND STRIKE PLATE
STEP 3 PREPARING KEYPAD
Screw A
Screw D
Solenoid (Optional)
NOTE: Drilling this hole is optional
but recommended.

9
STEP 4 INSTALLING KEYPAD
Adjust lock cylinder to
horizontal insert
Wire goes in
under the latch
This side up

10
STEP 5 INSTALLING MOUNTING PLATE
Silicone Weather Seal
Bulge on this side
Turn the knob to test lock
& unlock functions before
fully tightening the screws.
Make sure the bolt extends
and retracts smoothly.
Do not over tighten
the screws.
PRO TIP: We have a video tutorial.
Screw E
Route the wire through the hole

11
STEP 6 PREPARING INTERIOR ASSEMBLY
When installing the Back Plate (interior of your home), make sure the Lock Switch
is set to correct function.
Lock on Left Side
(inside view)
Lock on Right Side
(inside view)

12
STEP 7 GENTLY CONNECT THE CABLE
Bolt is retracted

12
STEP 8 INSTALLING INTERIOR ASSEMBLY & TESTING
Push extra wire back
into door hole thru this hole
Test & check
if the bolt moves
in & out smoothly
Screw C
Screw B

13
STEP 9 BACK UP KEY TESTING
Test & check
if the bolt moves
in & out smoothly
Push the bottom side
of the cover
At the same time, Rotate 120 degrees
counter-clockwise
Emergency power

14
STEP 10 INSTALLING BATTERIES & COVER
Reset button
Slide the cover on
There is one reset button on the
back panel.
You can press this button for 2
seconds, you should hear 2
beeps. This means the lock is
under factory state, the default
passcode is: 123456.
Fingerprint and IC card will need
to be re-calibrated again.
Reset to
Factory State

15
Operation Testing
System Details
Fingerprint
Password
Card
Lock Button
Cover
Cylinder
USB Port
Unlock Button
Use the card or password to unlock the smart lock
Battery Box
Back Panel
Thumb Knob
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Project
Main material
Door thickness
Battery power
Quiescent dissipation
Dynamic power dissipation
Digit of password
Card reading distance
Anti radiation interference
Operation humidity
Operation temperature
Fingerprint collection
Fingerprint collecting time
Battery Life
WiFi Gateway
Communication
Emegercy power supply
Antistatic
Low-Battery alarm
Available Mortise
Support OS
Unlock Methods
Parameter
Zinc Alloy, ABS
35mm to 55mm
6V DC:4pcs AAA alkaline batteries
<50uA
<300mA
Valid 6-12 digits
5-20mm
10V/m
10%-90%
(-20°C) − (60°C)
Semiconductor collector
<0.5seconds
12,000 times (12 months average)
Available (Optional)
Bluetooth 4.0 BLE
5V Micro USB
Contact discharge 8KV/Air discharge 15KV
4.8V
60/70 adjustable deadbolt mortise
I OS 7.0 or above / Android 4.4 or above
Card, Passcode, APP, Fingeprint, Keys

ISSUES WITH YOUR ORDER? LET US HELP!
EMAIL SUBJECT: HELP NOW! For quick support
[e-mail]
Voted #1 in Customer Service for a Reason!
WWW.ROOKSMART.COM
ROOKSMARTHOME
TAG US ON SOCIAL TO BE FEATURED