ROOMS TO GO KIDS IVY LEAGUE 2.0 3502360P User manual

WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
-
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
-
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
DO NOT REMOVE WARNING LABEL FROM BED.
-
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
of entrapment or falls.
-Ensure thickness of mattress and foundation combine does not exceed 10 inches (255mm) and
mattress surface is at least 5 inches (127mm) below upper edge of guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
-
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
IVY LEAGUE 2.0 COLLECTION
THANK YOU FOR YOUR PURCHASE
1/11/2021 Page 1 of 32

FULL LOFT W/CHEST-BOOKCASE FULL STEP LOFT W/CHEST-BOOKCASE FULL STEP LOFT W/CHEST-BOOKCASE & DESK ATTACHMENT
Reference page 13-16 for assembly steps Reference page 17-23 for assembly steps Reference page 24-32 for assembly steps
3502360P WALNUT 3501326P WHITE 3572360P WALNUT 3571326P WHITE 3582360P WALNUT 3581326P WHITE
CONFIGURATIONS
TWIN LOFT W/CHEST TWIN STEP LOFT W/CHEST TWIN STEP LOFT W/CHEST & DESK ATTACHMENT
Reference page 9-12 for assembly stepsReference page 6-8 for assembly stepsReference page 3-5 for assembly steps
Choose your configuration, read all the instructions, identify all components, and be sure you have all parts prior to assembly
3542360P WALNUT 3541326P WHITE 3632360P WALNUT 3631326P WHITE 3642360P WALNUT 3641326P WHITE
1/11/2021 Page 2 of 32

TWO PEOPLE ARE NEEDED TO ASSEMBLE
DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES
38000232 100-645 TWIN SLAT PACK (4)
71 Pc
Folding desk
1 Pcs
3/4" Screw
1 Pc
TOOLS NEEDED
Phillips screwdriver (not included)
Allen wrench (included)
32
1/11/2021 Page 9 of
44 Pc
Slats
ARE CONNECTED TOGETHER
32 Pc
1 1/4" Screws
2 Pcs
Guardrails 5 Drw Loft chest Metal pin
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
22 Pc Step bunk unit Allen wrench
61 Pc
10 Pcs
11 Pc
51 Pc
16 Pcs
50 mm Bolts
Twin top bunk bed end
Side rails
35913260 3261711 5 DRW. LOFT CHEST
36113265 3261601 FOLDING DESK
35613264 3261705 TWIN TOP BUNKBED END
36513263 3261731 2 SIDE RLS/2 GUARD RLS
3581326P TWIN STEP LOFT W/CHEST & DESK ATT. WHITE
35713266 3261160 STEP BUNK UNIT
38000232 100-645 TWIN SLAT PACK (4)
RTG SKU # STYLE # ITEM DESCRIPTION
36123608 3260601 FOLDING DESK
35623607 3260705 TWIN TOP BUNKBED END
36523606 3260731 2 SIDE RLS/2 GUARD RLS
P A R T S L I S T
3582360P TWIN STEP LOFT W/CHEST & DESK ATT. WALNUT
35723609 3260160 STEP BUNK UNIT
35923603 3260711 5 DRW. LOFT CHEST
RTG SKU # STYLE # ITEM DESCRIPTION
A
B
C
D
E

STAIRS ON THE RIGHT
STAIRS ON THE LEFT
(Factory setting)
Install slats, one on each end, two equally spaced in the middle,
Assemble top side rails. then fasten with 1 1/4" screws.
1/11/2021 Page 10 of 32
ASSEMBLY INSTRUCTIONS
FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM
For stairs on the left, first remove the screws, then remove the
panel and install it on the other side, and secure with the screws. Assemble loft chest and top bunk bed end.
STEP 3
STEP 2
STEP 1
C
B
CA
A
A
A
A
C
D
D
D
B
B

Unfold corner supports.
Place folding desk by sliding into the opening of loft chest
Secure each corner block with 1 1/4" screw in the pre-bore hole. then push down.
1/11/2021 Page 11 of 32
Unfold desk leg.
ASSEMBLY INSTRUCTIONS
Assemble guardrails and tighten all bolts.
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Remove center molding by lifting up then pulling out.
STEP 4
A
B
A
B
STEP 6
STEP 5
C
C
STEP 9
STEP 8
STEP 7
A
A

Twin size mattress- 74" - 75" long and 37-1/2" - 38-1/2" wide
Twin size Bunkie board- 74" long and 37-1/2" wide
Full size mattress- 74" - 75" long and 52-1/2" - 53-1/2" wide
Full size Bunkie board- 74" long and 52-1/2" wide
1/11/2021 Page 12 of 32
Place Bunkie boards (required, sold separately) on top of the slats
Use only correct mattress dimensions and Bunkie board:
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
one 3/4" screw, then place back the drawer. one 3/4" screw.
ASSEMBLY INSTRUCTIONS
For stairs on the right remove third drawer, and secure desk with For stairs on the left, open the door and secure it with
STEP 10
STEP 11
E
E
E
E
E