ROOMS TO GO Sofia Vergara NAJA 7304-4 User manual

NAJA 7304-4 SIDE CHAIR PEWTER PEWTER SKU#42473049
Assembly Instructions
Caution : Please read instructions thoroughly before unpacking assembly parts.
1. We recommend that you should assemble this product with the assistance of another person; this
will make assembly easier, and will help to eliminate damage to the product or injury to persons
during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non - abrasive floor before assembly, and follow the assembly steps to
assemble your newly purchased product correctly and efficiently.
NO.
A
B
C
PARTS LIST
Chair Back
Seat Cushion
Q' TY
1
1
2
3
2
4
NO.
1
HARDWARE LIST
Allen wrench ( 4mm )
Q ' TY
1
4
B
MADE IN VIETNAM
PAGE 1 OF 2
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts,which may have come loose inside the carton during shipment.
ldentify and count all parts and compare with the HARDWARE LIST below.
∅5/16" x 19 x 2mmT Flat washer
∅5/16" x 13 Spring washer
∅5/16" x 18 x 2-3/4"L Bolt
∅5/16" x 13 Spring washer
∅5/16" x 19 x 2mmT Flat washer
∅5/16" x 18 x 2-3/4"L Bolt
∅1/4" x 18 x 1-3/4"L Bolt
∅1/4" x 13 Spring washer
∅1/4" x 19 x 2mmT Flat washer
This product is manufactured by NAJA for ROOMS TO GO
STEP 1: Assemble the seat frame corner with the chair back.
Do not tighten all bolts until seat frame is fully assembly. STEP 2: Assemble the seat frame center
with the chair back.
Hardware pack Location(s): 7304-4 SIDE CHAIR PEWTER PEWTER SKU#42473049
Stretcher (left)
Stretcher (right)
Front Leg ( left)
Front Leg (right)
1
1
D
E
F
1
1
4#8 x 1-1/2"L Screw 4
TOOLS REQUIRED (NOT PROVIDED)
Description Sketch
Phillips screwdriver

Assembly Instructions
MADE IN VIETNAM
PAGE 2 OF 2
NAJA 7304-4 SIDE CHAIR PEWTER PEWTER SKU#42473049
This product is manufactured by NAJA for ROOMS TO GO
COMPLETE
C
D
STEP 3： Assemble the side stretcher
with the chair back. Do not screw in all bolts.
STEP 4： Assemble the front leg with the stretcher.
E
F
EF