ROOMS TO GO MONTARA 71563122 User manual

Assembly Instructions
Identify All Parts Packed In The Carton Against The Parts List. Remove All
Protective Materials.Place Parts On A Non-abrasive Surface To Avoid
Scratching.Do Not Attempt Assembly If Any Parts Are Missing Or Damaged.
Warning: Please Do Not Use Acid Or Alkaline Washing Liquid To Clean The Product.
Chairs have a 300 lbs weight capacity.
Assemble The Product As Below Shown Step By Step
Part List
GLA-63127-31KD
Made in China
1
NO. SKETCH
DESCRIPTION
QTY NO.
SKETCH
DESCRIPTION QTY
A
Seat Frame
1
AA Bolt
(M8*55) 4
B
Swivel Base
1
BB Steel Washer
(Φ12.5*Φ8.5*2) 8
C Seat Cushion
1
CC Steel Washer
(Φ16*Φ8.2*1.0) 8
D Back Cushion
1
DD Steel Washer 4
E Foot Glider
4
EE Nut 4
FF Bolt Cap
(19*16.5*11.5) 4
GG
Bolt Cap
(19*16.5*17) 4
HH Wrench 2
MONTARA SWIVEL CLUB CHAIR
71563122
SKU#

STEP 1
Hand-tighten nuts 3-4 revolutions only. After attaching all bolts, adjust all parts at
the correct position. Then tighten all bolts and nuts. Do Not Over Tighten.
STEP 2
Turn the chair right side up. Adjust the pre-installed foot glider(E) at the bottom of
swivel base until the chair is level with the ground securely, your chair is ready for
use.
2
A
B
D
C
E
A
B
СС
EE
BB
DD
GG
AA
BB
DD
CC
FF