ROOMS TO GO 1407-SC User manual

A
DC
B
1407-SC / RV-CH-R1350C-CHL-RTA
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material for small parts which may have
come loose inside carton during shipment. Identify and count all parts and compare with the hardware list as below:
Hardware List
Parts List
No. Picture Description Dimension Qty
1
2
3
4
5
JCBC (M6) with washer
JCBC (M6) with washer
Hex Nut
Spring Washer
Flat Washer
6 x P1.0 x 40mm
6 x P1.0 x 70mm
5/16" x 18T x 1/2"
1.5 x 14mm
1.5 x 22mm
2 Pcs
4 Pcs
4 Pcs
4 Pcs
4 Pcs
6C.S.K Screw (M4) 4 x 38mm
8Wrench 2 x 82mm 1 Pc
A1 Pc
B1 Pc
C
No. Description
2 Pcs
Back Rest
Cushion Seat
Front Leg
PARTS DETAIL
Qty
ITEM :
DESCRIPTION :
SKU :
Page 1 of 3
ITCO 1407-SC SIDE CHAIR
7Allen Key (M4) 4 x 58mm 1 Pc
4 Pcs
D2 Pcs
Stretcher
42414071

Assembly steps
Page 2 of 3
NOTE :
To ensure that chair is levelled, assemble the chair on flat & soft surface. DO NOT tighten all the screws & bolts until
the chair been adjust & level all the legs so that they do not wobble. Once adjusted then only tighten all the screws
using Allen Key while making sure the unit remain level.
STEP 1
STEP 2
Assemble seat frame to the backrest.
Assemble front legs to the seat frame with stretcher. DO NOT FULLY TIGHTEN
THE SCREW UNTIL STEP 3.
A
B
7
1
D
C5
4
3
8

STEP 3
Assemble seat frame to the backrest.
STEP 4
Assemble stretcher to the backrest.
ASSEMBLY
COMPLETE!
6
2 7
Assembly steps
Page 3 of 3
NOTE :
To ensure that chair is levelled, assemble the chair on flat & soft surface. DO NOT tighten all the screws & bolts until
the chair been adjust & level all the legs so that they do not wobble. Once adjusted then only tighten all the screws
using Allen Key while making sure the unit remain level.