Rosewill SCM-01B User manual

1
SCM-01B
Thank you for purchasing a Rosewill Case.
Please read the instruction manual before use and retain for future reference.
PRODUCT OVERVIEW
Right Side Panel
Left Side Panel
Front Panel
80 mm Fan
x8 x8 x6 x16 x1
M/B Standoff Screw-A Screw-C Screw-B Buzzer
Motherboard 3.5” HDD PSU
GPU
Motherboard
5.25"Device
2.5" SSD/HDD
Motherboard
Alarm
Disassembly Chart (components vary by country)
Accessory Kit

2
1
1. Open the Unit
1-1. Remove the thumb screws and slide
out panels R and L (Figure 1).
2. Install the Power Supply
2-1. Set the power supply unit (PSU) on the top-rear of the case and secure with Screw-A
(Figure 2).
2
INSTALLATION GUIDE

3
3. Install the Motherboard
3-1. Line up the standoffs with the screw holes on the motherboard (Figure 3a).
3-2. Screw the motherboard down with Screw-B (Figure 3b).
3b
4. Install the Add-on Card
4-1. Remove the slot cover (Figure 4a).
4a
3a

4
4b
4-2. Install the add-on card and secure with the Screw-A (Figure 4b).
5. Install an External 5.25” Device
5-1. Pull to remove the front panel (Figure 5a).
5a

5
5-2. Insert the 5.25” drive and secure with Screw-B (Figure 5b).
5b
5c
5-3. Remove the slot cover on the front panel and put it back onto the case (Figure 5c).

6
6. Install a 3.5” or 2.5” Drive
6-1. 3.5” Drives: Insert 3.5” drives into the cage and secure with Screw-C (Figure 6a).
6-2. 2.5” Drives: Secure 2.5” SSD/HDD with Screw-B (Figure 6b).
6a
6b

7
7. Care
To prevent damage, it is recommended to keep all panels closed and secured.
7-1. Slide the side panels back into place and secure with thumb screws (Figure 7).
7
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD Audio CONNECTOR
USB2.0USB3.0SPK MIC
I/O PIN-OUT
I/O DIAGRAM

Model
Model Name SCM-01B
Specs
Type Mini Tower
Color Black
Case Material Steel/Plastic
Power Supply Included No
Motherboard Compatibility Mini-ITX, Micro-ATX
Side Panel Window No
Expansion
External 5.25" Drive Bays 1
Internal 3.5" Drive Bays 3
Internal 2.5" Drive Bays 2
Expansion Slots 4
Front Ports
Front Ports
1 x USB 3.0
2 x USB 2.0
Audio In/Out
Cooling System Options
80 mm Fans 1 x Front (optional)
1 x Rear (pre-installed)
120 mm Fans 1 x Front (optional)
Physical Specifications
Dimensions 6.69” x 13.78” x 14.96” (W x H x D)
Weight 6.5 lb
SCM-01B_A
Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.
SPECIFICATIONS TABLE