RSA Lighting QCT906SP User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
www.cooperlighting.com
SPECIFICATION FEATURES
7.25”
9.75”
12.00”
13.00”
8.18”
4.63”
4.63”
Ceiling
Cut-Out
4.141”
A...Housing
Housing and plaster frame: 18 gauge CRS
with flat black powder coated internal
finish. Aperture ring depth is factory
configured to accommodate specified
ceiling thickness.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
Vent holes in housing provide cooler
operation.
C ...Electrical
Integral j-box and electronic or magnetic
low voltage transformer . 120V or 277V
input, 12V output. Junction box is
U.L. listed for through branch wiring.
Includes five 1/2 trade size knockouts
(six knockouts when magnetic xfmr. is
specified)
D...Lamp
12V MR16 71 watts max. (not included)
Internal rotation ring with locking
adjustment. Provides 360º rotation of
trim and secures original trim position
after relamping. “POSI-GRIP” bi-pin
lamp socket for firm, mechanical lamp
connection.
E ...Mounting
Hanger Bars and Butterfly Brackets
included for residential and commercial
applications respectively. Perforated
flaps for secure drywall installation.
Ceiling Cut-Out: 4.141” dia.
QUIET CEILING
TRIMLESS
QCT906SP
Special Ceiling
Housing
for Round Trim
FOR 12V MR16 71W max.
ORDERING INFORMATION
Housing
QCT906SP =
Quiet Ceiling
Special Ceiling Housing
for Round Trim
w/ Integral Low Voltage
Transformer
Voltage
120 =120 volts primary
277 =277 volts primary
Special ceiling housing for Quiet Ceiling round trimless fixtures.
For 12V MR16 71 watts max.
For installation in non-plaster/drywall ceiling materials such as wood,
marble or concrete. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
Transformer
ELC =Electronic
MAG =Magnetic
QCT906SP
rev. 081408
Ceiling Thickness
Specify - 2.25” max.
Cut-out in ceiling material must be
sized perfectly to the diameter of the
plasterframe collar for trimless effect.
Ceiling Material