2. Obtaining special characters
Key
1st press
2th press
3th press
4th press
5th press
6th press
7th press
8th press
9th press
10th press
11th press
1“space” . , ‘ ? ! ; : # 1
0 - + = / ¥ _ < > ( ) 0
@ @ $ % & * #
>REM : The other keys function as in writing SMS with a
cellular phone.
3. Initiating Panic Alerts
3.1 Red Button of the keypad
Panic alert : immediately triggers on all sirens.
Key order to activate/disactivate the function :
With direction arrows go to menu:
PROGRAMMABLE FEATURES -> PANIC BUTTON
ENABLED. Validate with the [YES] key. Use direction arrows to
modify the state.Validate with the [YES] key.
Enter the installer code if need be.
3.2 Silent Panic alert
On the keypad : Code under constraint (or under threat) : User
code + 1, example : (2999 -> 3000)
On the remote control : Press 2 seconds on the key
(acquisition bip for 2 seconds)
3.3 Audible Panic Alert
On the keypad : Code under constraint (or under threat) : User
code + 2, example : (2999 -> 3001)
On the remote control : Press 2 seconds on the key
(acquisition bip for 2 seconds)
Remark : If the red button of the keypad is deactivated, the alert
sound on the remote control will not function, but on the keypad
will still display that the panic has been pressed and will require
a code + [YES].
4. I have a problem, what should I do?
4.1 My first keypad does not record on the panel
Have you pressed on the PROGRAM BUTTON of the panel
before trying to record on the keypad?
4.2 Retrieve a keypad deleted by error
Remove the keypad's batteries.
Press the PROGRAM BUTTON of the panel for one second
(cover closed), (the indicator flashes once). Put back the batteries
and initialize the keypad by simultaneously pressing on the [CLR]
and [ESC NO] key unitl the indicator of the latter flashes and then
release. It will then require you to enter the installer code (do so
and validate with the [YES]) key, then the keypad is recovered.
4.3 How to fix a faulty keypad, without re-program-
ming the site
Press on the PROGRAM BUTTON of the panel for one second
(cover closed), the indicator flashes once.
Put the batteries in the new keypad.
Press the [CLR] and [ESC/NO] keys simultaneously unit its
indicator flashes and then release. The keypad records.
Key in the installer code again on the keypad's demand.
Possibility of testing RF radio range and out of this menu and the
new keypad is operational.
Proceed in carrying out in limited time of 15 seconds and renew
the operation if need be.
(Do not forget to delete the faulty keypad of the programming,
otherwise there will be a RF Supervision of radio loss…)
5. Add a second keypad
It is possible to add several keypads on the same site. During
the recording of a new keypad, it is possible to allocate to a
geographical zone other than zone 1, but in this case the new
chosen zone shall also be delayed.
CMA means CMA600 for USA/Canada, CMA700 for Australia/
Singapore and CMA200 for Europe and rest of the world.
EMEA SALES
2, rue Alexis de Tocqueville
92160 ANTONY
FRANCE
Hot line : +33 (0)820 846 620 / UK : 0871 951
Fax : +33 (0)3 90 20 66 36
© 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIEDTM is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
Specications subject to change without notice.
North American Headquarter
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Hot line : 877-206-5800
Fax : 651-762-4693
www.videofied.com
I N S T A L L A T I O N I N S T R U C T I O NKeypad CMA
