RTA RTA-3803 User manual

MODEL RTA - 3803
MODEL RTA-3803
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
ASSEMBLY INSTRUCTIONS

RTA-3803
DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
DO NOT exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 55"W x 65"D x 30"H

RTA-3803 P.3
PARTS LIST
2 3 41
56 7
8
910 11
Left Structure Right Structure Left Panel Right Panel
Long Back Panel
Short Horizontal Tube
Short Back Panel
Long Horizontal Tube
Studs
T Structure Connecting Tube
1
21
2
33
4
4
7
9
12
13
14
18
15
x 2x 2 x 2 x 2
x 8 x 2
x 2

P.4
12 13
14 15
17 18
16
Left
Right
RTA-3803
Short Table Top Conner Table Top
Long Table Top Left Slider Base Right Slider Base
Metal Slider Guides Keyboard Panel
SCREWS LIST
A
C
D
B13
PART PARTQTY. QTY.ITEM ITEM
4
11
16
1
E
F12
4
6X75 MM
6X35 MM
6X30 MM
4X10 MM
4X14 MM
6X40 MM
x 1 SET

P.5
ASSEMBLY STEPS:
10
11
15 16
17
Left Right
17
SCREWS
D
4PCS
4X10 MM
SCREWS
1PC
6X35 MM
B
1
2
RTA-3803
ATTENTION: HOLES ON PANELS MAY BE HIDDEN UNDERNEATH PVC LAMINATE!!!
DO NOT TIGHTEN THE SCREWS UNTILL ALL OF THEM ARE IN THE RIGHT POSITION.
Use Screws (B) to assemble the “T” Structure (10) to the Connecting
Tube (11).
Use Screws (D) to assemble the Metal Slider Guides (17) to the Left &
Right Slider Bases (15&16).
ASSEMBLY TIPS ARE LOCATED AT
THE END OF THE MANUAL.

P.6
17
Left
Right
17
18
SCREWS
4PCS
4X14 MM
E
1
2
6
SCREWS
4PCS
6X40 MM
F
2
4
1
3
2
4
1
3
5X8
SCREWS
16PCS
6X75 MM
A
3
4
5
RTA-3803
Use Screws (E) to assemble the Keyboard Panel (18) to the Metal
Slider Guides (17) as shown.
Use Screws (A) to assemble the Left & Right Panels (3&4) to the
Left & Right Structures (1&2). Please pay attention to the direction
of the holes on the panels and structures!!! Then attach the Studs (5)
to the bottom of the structures.
Use Screws (F) to assemble the Short Horizontal Tubes (6) between
the Left & Right Structure (1&2).
Please pay attention to the holes being used on the structures!!!
Please pay attention to the direction of the holes on the tubes!!!
15
16
Please refer to the Assembly
Tips at the end of the manual
for troubleshooting this step.

P.7
2
1
8
1
2
9
SCREWS
4PCS
6X35 MM
B
1
2
7
SCREWS
4PCS
6X35 MM
B
SCREWS
4PCS
6X40 MM
F
6
7
8
RTA-3803
Use Screws (B) to assemble the Short Back Panel (7) between the
Left & Right Structure (1&2).
Use Screws (F) to assemble the Long Horizontal Tubes (8) between
the Left & Right Structure (1&2).
Please pay attention to the holes being used on the structures!!!
Please pay attention to the direction of the holes on the tubes!!!
Use Screws (B) to assemble the Long Back Panel (9) between the
Left & Right Structure (1&2).

P.8
** There are 4 options in which to assemble this L-desk. Please
select below according to your preference:
A
A1-A4
B
B1-B4
C
C1-C4
D
D1-D4
12
18
14
18
14
18
12
18
RTA-3803
Left short table with
keyboard panel+ Right
long table
Left short table + Right
long table with keyboard
panel
Left long table with
keyboard panel+ Right
short table
Left long table + Right
short table with keyboard
panel

P.9
2
1
10
11
SCREWS
4PCS
6X40 MM
F
SCREWS
4PCS
6X35 MM
B
6
15
16
A1
A2
RTA-3803
Use Screws (F) to fix the “T” Structure (10) and the Connecting
Tube (11) to the Right Structure (2) and the Left Structure (1).
Use Screws (B) to assemble the Left & Right Slider Base (15&16)
to the Short Horizontal Tubes (6).
Please pay attention to the holes being used on the tubes!!!
SHORT TABLE LONG TABLE

P.10
6
8
10
11
12
13
14
SCREWS
11PCS
6X30 MM
C
A3
A4
RTA-3803
Use Screws (C) to assemble the Short Table Top (12), the Corner
Table Top (13) and the Long Table Top (14).
Tighten all the screws and enjoy your unit.

P.11
2
1
10
11
SCREWS
4PCS
6X40 MM
F
SCREWS
4PCS
6X35 MM
B
15
16
8
B1
B2
RTA-3803
Use Screws (F) to fix the “T” Structure (10) and the Connecting
Tube (11) to the Right Structure (2) and the Left Structure (1).
Use Screws (B) to assemble the Left & Right Slider Base (15&16)
to the Long Horizontal Tubes (8).
Please pay attention to the holes being used on the tubes!!!
SHORT TABLE LONG TABLE

P.12
6
8
10
11
12
13
14
SCREWS
11PCS
6X30 MM
C
B3
B4
RTA-3803
Tighten all the screws and enjoy your unit.
Use Screws (C) to assemble the Short Table Top (12), the Corner
Table Top (13) and the Long Table Top (14).

P.13
2
1
10
11
SCREWS
4PCS
6X40 MM
F
SCREWS
4PCS
6X35 MM
B
C1
C2
8
15
16
RTA-3803
Use Screws (F) to fix the “T” Structure (10) and the Connecting
Tube (11) to the Right Structure (2) and the Left Structure (1).
Use Screws (B) to assemble the Left & Right Slider Base (15&16)
to the Long Horizontal Tubes (8).
Please pay attention to the holes being used on the tubes!!!
SHORT TABLE
LONG TABLE

P.14
10
11
8
6
12
14
13
SCREWS
11PCS
6X30 MM
C
C3
C4
RTA-3803
Tighten all the screws and enjoy your unit.
Use Screws (C) to assemble the Short Table Top (12), the Corner
Table Top (13) and the Long Table Top (14).

P.15
2
1
10
11
SCREWS
4PCS
6X40 MM
F
SCREWS
4PCS
6X35 MM
B
6
15
16
D1
D2
RTA-3803
Use Screws (F) to fix the “T” Structure (10) and the Connecting
Tube (11) to the Right Structure (2) and the Left Structure (1).
Use Screws (B) to assemble the Left & Right Slider Base (15&16)
to the Short Horizontal Tubes (6).
Please pay attention to the holes being used on the tubes!!!
SHORT TABLE
LONG TABLE

P.16
10
11
8
6
12
14
13
SCREWS
11PCS
6X30 MM
C
D3
D4
RTA-3803
Tighten all the screws and enjoy your unit.
Use Screws (C) to assemble the Short Table Top (12), the Corner
Table Top (13) and the Long Table Top (14).

HELPFULL ASSEMBLY TIPS
PART N0. DESCRIPTION QTY
1
2
3
4
5
A
B
C
FRAME
SOPPORT
BACK PANEL
GLIDE
TABLETOP
6x20mm SCREW
6x30mm SCREW
TOOL
2
2
1
4
1
4
8
1
1
SC REW S
2PCS
6X50 MM
A
3
1
3
1
3
1
1
2
SC REW S
4PCS
6X30 MM
C
2
1
1
5
4
SC REW S
4PCS
6X65 MM
B
1
1
4
SCREW
LOOSE!
- FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP,
AND DO NOT SKIP ANY, UNLESS ADVICED TO DO SO
BY AN RTA PRODUCT’S TECHNICIAN.
- MAKE SURE THE PACKAGE CONTAINS ALL THE PARTS
LISTED IN THE LIST OF PARTS, INCLUDING ANY HARDWARE.
- ON EACH STEP, AND TO AVOID MISALIGNMENTS,
ALWAYS LEAVE SCREWS LOOSE,
AND DO NOT TIGHTEN THEM UNTIL ALL ARE IN PLACE.

30mm
30mm
X
CORRECT SIZE OF SCREW. SCREW WILL DAMAGE THE PART!
X
X
DOES THE HOLE LOOK TOO SMALL?
CAREFULLY PERFORATE.
THE HOLE IS BIGGER THAN WHAT IT APPEARED.
MISALIGNED NUT: ALIGNED NUT:
MISALIGNED CAM LOCK: ALIGNED CAM LOCK:
- MAKE SURE TO USE THE CORRECT SCREWS OR BOLTS
AND DO NOT OVERTIGHT THEM.
DOING SO MIGHT CAUSE DAMAGE TO THE PARTS
OR PRODUCTS WHICH IS NOT
COVERED BY THE PRODUCT’S WARRANTY.
- IN SOME WOOD PANELS THE LAMINATE MIGHT BE COVERING
THE HOLES. LOOK FOR INDENTENTIONS IN THE AREA WHERE
THE HOLE SHOULD BE. IF THE HOLES LOOK TOO
SMALL FOR A SCREW, JUST CAREFULLY PUSH THE SCREW THRU THEM.
- SOME WOOD PANELS HAVE METAL INSERTS THAT LOOK
LIKE SCREWS. THESE PARTS ARE EITHER NUTS
OR CAM LOCKS. MAKE SURE THEY ARE ALIGNED
TO RECEIVE THE SCREWS OR BOLTS.
35mm
35mm

English
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR
EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL
DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE
WARRANTY.
- DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL
TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF
A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY
TOWEL.
- PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED
BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE
REMOVED FROM THE PRODUCT.
CARE AND MAINTENANCE