Russell Hobbs RHFH1008B User manual

Product only suitable for well insulated spaces or occasional use
For Customer Services &Spare Parts please call03452097461
Or visit us at mda.russellhobbs.com
PLEASE RETAIN
FOR FUTURE REFERENCE
Model Number:
RHFH1008 (B)
Ceramic Heater

CONTENTS
Page(s)
Safety Instructions
3 - 5
Product Diagram
6
Using
your Heater 7-8
Cleaning
and Care 9
Problem
Solving 10
Guarantee
and Customer Services 11
Connection
to the Mains Supply 12
Specification
13-14
Notes
15
Disposable
Information 16
2

SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
observed, including the following:
•Read all instructions.
•Check that the your mains voltage corresponds with the rating on the
appliance.
•The appliance must not be left unattended while it is connected to the
mains supply.
•This appliance must be positioned upright on the floor away from
curtains, furniture or wall coverings and other flammable items.
•Do not touch hot surfaces. Use the handle or the controls.
•To protect against electrical shock do not immerse cord, plug, or
appliance in water or other liquid. Do not operate with wet hands.
•Do not let the cord hangover the edge of a worktop, table etc. or touch
hot surfaces.
•Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or is dropped or damaged in any manner. The
supply cord cannot be replaced. If the cord is damaged the appliance
should be scrapped.
•The use of accessory attachments not recommended by the appliance
manufacturer may cause fire, electric shock or injury.
•To disconnect remove the plug from the mains outlet. Do not pull the
plug out by the cord.
•Never remove parts from the appliance, such as the feet, screws
•This appliance must never be immersed in water. Never use the
appliance near a bath, shower or a swimming pool.
•Never use the appliance on or near hot surface.
•Never place flammable objects or clothing on top of the appliance.
•Allow at least 15cm safe area around the appliance on the top, at the
front and sides to provide good air circulation.
•Prevent overheating of the appliance by keeping the air inlets and
outlets clean and free of anything that may cause blockage. Check all
inlets and outlets from time to time for accumulated dust. DO NOT
COVER. 3

SAFETY INSTRUCTIONS
•Never move the heater when it is operating. Turn the heater off before
move it. Never move the appliance by pulling the cord.
•Never use the appliance in a room with explosive gas such as petrol, or
while using any kinds of flammable glues, sprays or solvents.
•The appliance must not be used with an extension lead.
•Do not place any part of your body near the air inlet, outlet or on the
fins ,to avoid personal injury, electric shock or fire.
•If overheating should occur, the built-in overheating safety device will
shut the appliance off.
•Caution: Some parts of this product can become very hot and cause
burns. Particular attention must be given when children vulnerable
people are present.
•Do not insert any foreign objects into the grill.
•Keep all grills clear of any draped fabric or curtains.
•The appliance must not be located immediately below a mains socket.
Do not use the appliance with a programmer, timer or any other device
that switches the appliance on automatically. A fire risk exists if the
appliance is covered or positioned incorrectly.
•Do not operate this appliance for any thing other than its intended use.
•This appliance is not intended for commercial use
•This product is intended for household use only. Do not use outdoors.
•This product is only intended for heating.
•Warning: It is hazardous for anyone other than a competent person to
carry out any service or repair operation which involves the removal of a
cover which gives protection against exposure to electrical parts.
•Warning: Children should not use this appliance. Close supervision is
necessary when any appliances are used near children.
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
4

SAFETY INSTRUCTIONS
•Children of less than 3 years should be kept away unless continuously
supervised.
•Children aged from 3 years and less than 8 years shall only switch
on/off the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years
and less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.
•Warning: This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to make
sure that they do not play with the appliance.
Electrical Safety
THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET
•Before switching on, make sure that the voltage of your electricity
supply is the same as that indicated on the rating plate. This product is
designed to operate on 220 –240V AC; 50Hz. Connection to any other
power source may damage the unit.
•This product may be fitted with a non re-wireable plug. If it is
necessary to change the fuse in the plug, the fuse cover must be
refitted. If the fuse cover becomes lost or damaged, the plug must not
be used until a suitable replacement is obtained.
•If the plug has to be changed because it is not suitable for your socket,
or becomes damaged in any way, it should be cut off and an
appropriate plug fitted. This should be carried out by a qualified
electrician. The plug removed must be disposed of safely, as insertion
into a socket is likely to cause an electrical hazard.
5

1. Temperature control dial
2. Power control dial
3. Power light
4. Oscillation function button
(rear of the appliance)
12
3
PRODUCT OVERVIEW
4
6
WARNING: In order to avoid overheating,
do not cover the heater.

HOW TO TURN THE HEATER ON
1. Before connecting your appliance to the mains socket,
position the appliance upright on the floor, at least 70cm
away from the wall, curtains, furniture or wall coverings.
2. Insert the mains plug into a suitable wall mains socket.
3. Then turn the power control dial to select your desired
function: Fan ,Low 1200W (LOW), High 2000W (HIGH),
4. Turn the temperature control dial clockwise, when you
hear a “pop” sound this means that the temperature
control is active, continue to adjust the temperature
control dial to your desired temperature.
5. To set the heater to Oscillate, locate the Oscillation
function button at the rear of the appliance. Press the
button and the unit will start to oscillate..
USING YOUR HEATER
7

HOW TO TURN THE HEATER OFF
1. Turn the power control dial to the ‘OFF’ position.
2. Then turn the temperature control dial anticlockwise to its
initial position.
3. Unplug the heater from the mains socket and allow the
heater to cool before storing it away.
NOTE: This heater will cool down slowly after the power is
shut off. Allow the heater to cool prior to any movement, the
built in carry handle should be used for ease of movement.
Safety Protection Devices –This appliance is fitted with an
overheat and tip over protection system.
1. Overheat Protection –the power to the heating elements
will automatically cut off if the temperature of the heating
element exceeds a certain limit. In the event of
overheating, the heater will stop operating. Once the
appliance has completely cooled, the appliance will then
resume operating as normal.
2. Tip Over Switch –the appliance needs to be placed on a
flat, firm and stable surface to ensure that the unit
contacts the floor firmly and the internal tip over switch is
level. In the event that the unit tips over or is placed on an
uneven or very soft surface the appliance will not operate.
USING YOUR HEATER
8

CLEANING AND CARE
WARNING: Electrical Shock Hazard.
Before you clean the appliance, disconnect the mains plug from
the wall socket.
•Allow the appliance to cool down completely before
cleaning.
•Do not immerse cord, plug or appliance in any liquid or allow
moisture to come into contact with electrical parts.
•Clean the outer surface using a moist cloth and wipe over
with a dry, soft cloth.
•Do not use harsh detergents, abrasives or spray on cleaners.
•Don’t allow water to seep into the openings or come into
contact with electrical connections.
•Allow sufficient drying time before operating again.
•Clean the air inlets and outlets regularly with a vacuum
cleaner using the brush attachment (with a regular use, at
least twice a year).
•When the appliance is not in use. We recommend that, the
heater is re-packed in its original packaging and stored in a
cool, dry place.
9

PROBLEM SOLVING
My appliance does not work when I turn it on:
1. Check that your appliance is plugged in and the power is
turned on at the mains socket.
2. Try another mains socket.
3. Check the appliance is in an upright position.
4. Check that the thermostat setting has not been set too low.
5. If the appliance still doesn’t work, do not try to repair it
yourself.
If your appliance power is automatically cut off, follow the step
below:
1. Unplug your appliance from the mains socket and allow it to
completely cool down.
2. Inspect your appliance. Clean the air inlet and air outlet with
a vacuum cleaner if necessary. If there are any signs of
physical damage (e.g. melting, or burning of the case), do
not attempt to use the appliance. Please leave all
maintenance work to qualified personnel.
3. Plug in the appliance and switch it on again. If it cuts off
again, move the appliance to a better ventilated location.
10

At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Customer Service Team on
0345 209 7461
who will be more than happy to assist you.
This product is guaranteed for 12 months from the date of the original
purchase. If any defect arises due to faulty materials or workmanship,
the faulty product must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
• The product must be returned to the retailer with the original proof of
purchase.
• The product must be installed and used in accordance with the
instructions contained in this instruction guide and any other
instructions for use which are supplied.
• It must be used for domestic purposes only and for its intended use.
• This warranty does not cover wear and tear, damage, misuse or
consumable parts.
This does not affect your statutory rights.
GUARANTEE AND CUSTOMER
SERVICES
11

CONNECTION TO THE MAINS
SUPPLY
This appliance is designed to operate from a mains supply of
220-240V~50Hz.
Check that the voltage marked on the product corresponds
with your supply voltage.
How to change the fuse
1. Slot the end of a screwdriver into the recess in the fuse
holder of the plug.
2. Pull the fuse holder upwards until free of the plug and slide
the fuse out.
3. Replace the fuse and replace fuse holder, pushing down
until locked into place.
Important: Only ever use a 10 amp fuse.
12

SPECIFICATION
Model
RHFH1008
Voltage
220
–240V 50Hz
Power
Input (Heating)
2000W
Suitable Room Size
10 (m2)
Oscillation
60
°
Handle Type
Integrated
Number of Heat Settings
2
Overall Size (H x W x D)
24.8 x 18.7 x 16 (cm)
Weight (KG)
1.75
13

Specification
14
Information requirements for electric local space heaters
Model number
RHFH1008
Item
Symbol
Value
Unit
Item
Unit
Heat Output
Type of heat input, for electric storage local space heaters only
Nominal heat
output
Pnom
2.0
kW
Manual heat charge control, with
integrated thermostat
No
Minimum heat
output (Indicative)
Pmin
1.4
kW
Manual heat charge control with
room and/or outdoor temperature
feedback
No
Maximum
continuous heat
output
Pmax
, C
2.0
kW
Electronic heat charge control with
room and/or outdoor temperature
feedback
No
Fan assisted heat output
No
Auxiliary electricity consumption
Type of heat output/room temperature control
At nominal heat
output
elMax
N/A
kW
Single stage heat output and no
room temperature control
No
At minimum heat
output
elMin
N/A
kW
Two or more manual stages, no room
temperature control
No
In standby mode
elSB
0
kW
With mechanic thermostat room
temperature control
Yes
With electronic room temperature
control
No
Electronic room temperature control
plus day timer
No
Electronic room temperature control
plus week timer
No
Other control options (multiple selections possible)
Room temperature control, with
presence detection
No
Room temperature control, with
open window detection
No
With distance control option
No
with adaptive start control
No
With working time limitation
No
With black bulb sensor
No
Contact details
Made by Product Care Trading Limited under license from Spectrum Brands (UK) Limited. Product Care Trading Limited,
Wigan, WN2 4AY/ PCT (NI) Ltd, Belfast, BT5 5AD. Russell Hobbs is the registered trademark of Spectrum Brands (UK) Ltd.

NOTES
15

The ‘wheelie bin’ symbol is known as the 'Crossed-out wheelie bin Symbol'.
When this symbol is marked on a product/batteries, it means that the
product/batteries should not be disposed of with your general household
waste. Only discard electrical/electronic/battery items in separate collection
schemes, which cater for the recovery and recycling of materials contained
within. Your co-operation is vital to ensure the success of these schemes
and for the protection of the environment. For your nearest disposal facility,
visit www.recycle-more.co.uk or ask in store for details.
SEDEX –Connecting businesses and their global suppliers to share ethical
data and enabling improvement in ethical performance. Visit
www.sedex.org.uk for further information.
We reserve the right, due to possible changes to design, to alter the
instruction manual without prior notice.
Revision 1.8
Made by Product Care Trading Limited under license from Spectrum Brands
(UK) Limited. Product Care Trading Limited, Wigan, WN2 4AY/ PCT (NI) Ltd,
Belfast, BT5 5AD. Russell Hobbs is the registered trademark of Spectrum
Brands (UK) Ltd.
Russell Hobbs Support: call 0345 209 7461 or visit: mda.russellhobbs.com