Rutland county garden furniture Oakham User manual

Assembly Instructions

Oakham picnic bench

Before you commence the assembly process we recommend that you read these instructions

thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have

the correct components. If for any reason you need assistance, you can find our contact details on the

final page of these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible and that you

use another person to assist you if necessary.

Package contents

Tools required

1 x Table top

2 x Seats

2 x Table A-frames

2 x Cross braces

2 x Seat supports and braces (8ft version)

12 x 70mm M8 Coach screws

4 x 60mm M8 Coach screws (12 x for 8ft version)

24 x Cover caps

10mm socket or spanner

The Oakham picnic bench

Oakham picnic bench

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 1

Step 2

Ensure that you have all of the correct parts as listed

on the front page of these instructions, including any

fixings.

Lay the table top upside down on a clean, flat surface

taking care not to damage it. Now line up one of the

table A-frames centrally on the table top as shown in

step 3.

Step 3

Step 4

Place one of the table A-frames centrally against the

fixing batten ensuring that the gap at the table edge

is the same on both sides. Now, using 2 of the

supplied 70mm coach screws and the pre drilled

holes, secure the table A-frame to the fixing batten

on the table top.

Place a cross brace in position as shown, ensuring

that it is flush with the underside of the table A-frame

and proceed to step 5. If you are building the 3ft

version please refer to Step 7 before proceeding with

Step 5.

Oakham picnic bench

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 5

Step 6

Ensure that the brace is lined up centrally on the

table and attach it to the A-frame with a 60mm coach

screw.

Make sure that the brace is still aligned centrally on

the table and affix the other end to the table top with

a 60mm coach screw as shown. Repeat steps 3 -6 to

finish the table assembly and proceed to step 8.

Step 7

Step 8

For the 3ft version steps 4 - 7 should be carried out

but with the braces in an offset configuration as

shown above and not centred on the table top.

Now proceed with Step 5.

Turn the table assembly right side up in preparation

for attaching the seat panels.

Oakham picnic bench

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 9

Step 10

For an 8ft model, follow Steps 9 to 12. Place one of

the seat panels upside on a flat surface and place the

seat support adjacent to the centre batten...

...and aligned centrally on the seat panel before fixing

into place with 2 x 60mm coach screws as shown.

Step 11

Step 12

Now place the brace set support brace as shown

so that it is also aligned centrally...

...before fixing into place with a 60mm coach through

the brace into both the support and the underside of

the seat panel.

Oakham picnic bench

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 13

Step 14

Place one of the seat panels in position as shown as

and proceed to step 14.

Align the seat panel batten with the outer end of the

A-frame as shown and repeat for the other end of the

seat panel.

Step 15

Step 16

Using the 70mm coach screws provided attach the

seat panel to the A-frame at both ends of the bench.

Please note that the children's version will have only

one screw at either end.

Repeat steps 13-15 for the other seat panel.

Finally, cover any exposed coach screw heads with

the cover caps provided. Your Oakham picnic bench is

now complete.

We hope that you found your product quick and easy to assemble but if not and you require any

further assistance or have any questions you can contact us by telephone on: 01778 440803

Email: [email protected]

www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals