Rutland County Garden Furniture Tinwell picnic table and bench set User manual

Assembly Instructions
T
Tinwell picnic table and
bench set
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Table top
2 x Seats
2 x Table leg frames 2 x Seats
4 x Seat leg frames 2 x A frames
4 x Seat leg braces
2 x Table leg braces
12 x M8 Coach screws 70mm
12 x M8 Coach screws 60mm
26 x Cover caps
* 8ft version additionally includes - 2 x seat supports and braces, 8 x
60mm Coach screws and 8 x cover caps.
10mm socket or spanner
Tinwell Picnic table and Bench set

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings. Lay the table top upside down on a clean, flat
surface, taking care not to damage it.
Now line up one of the table leg frames centrally on
the table top as shown and secure in place using 2
70mm coach screws through the pre-drilled holes in
the fixing batten.
Step 3
Step 4
Line up one of the Table leg braces centrally on the
table top.
Attach it to the underside of the Table top using a
60mm coach screw as shown...

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
...and secure to the Table end frame by using another
60mm coach screw through the end frame.
Repeat Steps 2 to 5 so that both Table ends are
attached...
Step 7
Step 8
...before turning the table right side up.
For an 8ft model, follow Steps 8 to 11. Place one of
the seat panels upside on a flat surface and place the
seat support adjacent to the centre batten...

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
...and aligned centrally on the seat panel before fixing
into place with 2 x 60mm coach screws as shown.
Now place the brace set support brace as shown so
that it is also aligned centrally...
Step 11
Step 12
...before fixing into place with a 60mm coach through
the brace into both the support and the underside of
the seat panel. Proceed to step 12.
Place one of the seat panels upside down on a clean,
flat surface, taking care not to damage it.

Tinwell picnic table and bench set
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
5
Step 13
Step 14
Now line up one of the Seat leg frames centrally on
the table top as shown and secure in place using 2
70mm coach screws through the pre-drilled holes in
the fixing batten.
Line up one of the Seat leg braces centrally on the
Seat panel and fix in place with 2 60mm coach
screws.
Step 15
Step 16
Now repeat steps 13 & 14 for the other end of the
seat unit. Build the second seat unit in the same
fashion. Cover any exposed screw heads with the
black plastic cover caps provided.
Your Tinwell picnic table and bench set is now
complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk