Rutland county garden furniture The egleton log store User manual

Assembly Instructions

The Egleton Log Store

Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to

familiarise yourself with the assembly procedure and to also check that you have the correct components. If for any reason

you need assistance, you can find our contact details on the final page of these instructions.

We highly recommend that any assembly is carried out on an open flat, level surface if possible and with sufficient space.

Tools required:

No2 Pozidriv screwdriver (or electric driver).

Components

24 x 40mm screws,

8 x 50mm screws

16 x 60mm screws

6 x 100mm screws

4 x Dome head

screws

1 x Shelf

1 x Base

2 x Roof panel

1 x Right side panel

1 x Left side panel

1 x Back panel

1 x Roof gusset

4 x Eave panels

2 x Framing strip

1 x Flashing strip

The Egleton Log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 1

Step 2

Begin by placing the base in position close to the

intended final location with the chamfered supports ends

facing front as shown.

Now lower an end panel onto the base so that the outer

edges are flush with the base ...

Step 3

Step 4

…and fix into place with 3 x 100mm screws as shown.

Repeat with the other side panel.

The Egleton Log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 5

Step 6

Now lower the shelf into place, gently easing the side

panels apart, if necessary, until it is located on its

supports as shown.

Working from behind the assembly, manoeuvre the back

panel into place and secure with 2 x 60mm screws at the

end of each cross support as shown.

Step 7

Step 8

Take one of the roof panels and line up a roof gusset as

shown with the apex adjacent to the edge of the roof

panel and butted up against the inner edge of the roof

batten...

…and fix into place as shown here with 2 x 50mm screws.

Add the second gusset to the other side of the roof panel

in the same manner.

The Egleton Log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 9

Step 10

Add the second roof panel, butting it up to the first one

and fix into place with another 2 x 50mm screws through

each of the gussets as shown for each side.

Lower the completed roof panel onto the assembly...

Step 11

Step 12

…ensuring the roof battens fit over the front and back as

shown here.

Fix the roof into place into the at each corner with 2 x

60mm screws.

The Egleton Log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 13

Step 14

Line up an eave panel so that centremost end is aligned

with the roof panel joint and the face is vertical. Fix into

place with 3 x 40mm screws as shown. Repeat for the

other side, making sure to butt the centre join together.

Now repeat the process on the rear of the store.

Butt the angled end of a framing strip against the

underside of the roof and align its outer edge with the

side panel. Fix into place with a pair of 40mm screws

through the top, middle and bottom.

Step 15

Step 16

Place the flashing strip onto the apex of the roof and

secure with the 4 x dome head screws as shown.

Your Egleton log store is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any further assistance or have

any questions you can contact us by telephone on: 01778 440803

Email: info@rutlandcountygardenfurniture.co.uk www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals