Rutland county garden furniture Panel pergola User manual

Assembly Instructions

Rutland Panel Pergola

Before you commence the assembly process, we recommend that you read these instructions

thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have

the correct components. If for any reason you need assistance, you can find our contact details on the

final page of these instructions.

We strongly recommend that any assembly is carried out on an open flat, level surface if possible and

with sufficient space. You will also require the assistance of at least 2 adults to complete assembly

safely.

If for any reason you don’t feel confident in completing this project, we would recommend consulting a

qualified professional to undertake the work.

The Rutland Panel Pergola

Tools required:

10mm socket, No2 Pozidriv screwdriver (or electric driver), step ladder or

platform.

Rutland Panel Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Components list

18 x 65mm

woodscrews

6 x 90mm

woodscrews

16 x 70mm

coachscrews

6 x 120 mm

coachscrews

4 x Posts

2 x Runner

2 x Outer rafter

2 x Inner Rafter

1 x Centre rafter

2 x Upright lattice

2 x Roof lattice

Rutland Panel Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 1

Step 2

Begin by laying one the posts down on a flat, level surface

and then placing one of the runners with its batten side

down and orientated toward the length of the post, on

top of it…

...with the batten butted up against the post and the top

of the post flush with the top edge of the runner. Now fix

into place using 2 of the 70mm coachscrews.

Step 3

Step 4

Add another post to the other end of the runner in the

same manner. Repeat this process for the remaining posts

and runner.

Using your assistants, manoeuvre the previously

assembled runner/post assemblies into place, positioning

them opposite each other, approximately the length of a

rafter apart. Now place one the outer rafters, the batten

toward the bottom of the rafter and on the inner face,

across the top of the posts as shown.

Rutland Panel Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 5

Step 6

Now secure into place with 2 x 70mm coachscrews into

each post.

Fix the second outer rafter into place in the same way as

before.

Step 7

Step 8

Now drop the rafters into place using the markings on the

runner’s battens to align them. The two outer rafters

should have their battens facing the adjacent outer rafter

and the centre rafter will be identified by the fact that it

has no batten.

Fix each rafter into place with a 120mm coachscrew

driven down through each end as shown.

Rutland Panel Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 9

Step 10

Take one of the upright lattice panels and put it in place

adjacent to the post and parallel to the runner as shown….

...so that it vertically aligned with the post and it is centred

under the runner batten before screwing into the post with

3 x 65mm woodscrews placed at the top, centre and

bottom.

Step 11

Step 12

Now secure the top rail of the lattice by screwing down

through the runner batten into the top rail of the lattice with

3 x 90mm woodscrews as shown.

Now drop one of the roof lattice sections into place,

positioning it so that the long rails are toward the floor and

the corner cut outs are correctly aligned.

Rutland Panel Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 13

Step 14

Fix the roof lattice into place with 6 x 65mm woodscrews as

shown.

Add the second roof lattice in the same way.

Step 15

Your Rutland Panel Pergola is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any

further assistance or have any questions you can contact us by telephone on: 01778 440803

Email: [email protected]

www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals