Rutland County Garden Furniture Belton Bench User manual

Assembly Instructions
The Belton Bench
1
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We strongly recommend that any assembly is carried out on an open flat, level surface if possible and
with sufficient space to work safely.
If for any reason you don’t feel confident in completing this project, we would recommend consulting a
qualified professional to undertake the work.
The Belton Bench
Tools required:
10mm socket drive or spanner

The Belton Bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Component list
4 x 60mm Coachscrews
12 x 70mm Coachscrews
16 x Black cover caps
1 x Table Top
2 x Seat Panels
2 x A-Frames
2 x Braces

The Belton Bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 1
Step 2
Lay the table top, upside down on a clean, flat surface
taking care not to damage it. Place one of the A-frames
centrally against the fixing batten ensuring that the gap at
the table edge is the same on both sides. Use 2 of the
70mm coach screws, guided by the pre- drilled holes, to
secure the A-frame to the fixing batten on the table top.
Take the second A-Frame and attach it to the table end
batten in the same way.
Step 3
Step 4
Place a brace in position as shown, ensuring that it is flush
with the the table A-frame and secure it to the table top
with a 60mm coach screw.
Ensure that the brace is central and secure the other end
to the A-Frame with a 60mm coach screw as shown.
Add the remaining brace to the other A-Frame in the
same manner as shown in steps 3-4.

The Belton Bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 5
Step 6
Turn the table assembly right side up and lower one of the
seat panels in position as shown…
…and, after ensuring the batten ends are flush with the
frame ends, secure each end of the seat panel with 2 x
70mm coach screws. Repeat with the second seat panel.
Step 7
Cover any exposed screw heads with the black cover caps.
Your Bisbrooke Bench is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk