Ruwido Symphony User manual

300.000 models in one
The classic among replacement remote controls

offer immediate customer service thanks to programming at your shop

replace more than 300.000 original remote controls

save costs and reduce stock risk
With the Symphony remote control
you can replace every function of
more than 300.000 different original
remote controls, all within a few
seconds.
What you need
To program a Symphony at you shop,
you just need a PC with Internet
access and the Symphony interface
cable. Simply install the infrared
system of your customer’s original
remote control on the Symphony
replacement remote. The database
is continuously updated every day.
www.ruwido.com/symphony
Symphony interface cable

Registration
Please register at www.ruwido.com/symphony here:
This is only needed first time you are
using the Symphony database.
____________________________________________________________________________
Easy programming in 4 steps
1connect remote control to PC
Connect either a Symphony tv (for TV-
sets) or a Symphony digital (for digital
set-top boxes) to your PC with the
supplied interface cable.
2select original device mode
Select the device type (for Symphony
PRO either ‘TV’ or ‘STB’ are valid)
and brand of the remote you want to
replace. Filter the results by adding
the original RC code, spare part or
model number. Alternatively you can
search for original remote pictures.
3install IR system
After having selected the original device,
click on DOWNLOAD to download the
selected IR system and then open the
downloaded file and start it to install the
IR system on your Symphony tv or digital.
Please print the key layout reference
sheet as manual for your customer.
4insert batteries and fix USB cover
To complete the product, insert batteries.
In the battery case you will also find a
plastic cap to cover the USB port.