copyright 2017 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
ruwido_healthcare_RC12122_tantum_RC12123_manual_v13.docx 9 of 22
code lock
in order to prevent an accidentally reprogramming of your remote control, the programmed code
can be blocked.
1. press and hold and simultaneously until the signal LED ( ) flashes twice.
note:
your remote control exits the programming mode automatically if no further input is made
within 10 seconds or if any other key except the keys 0 to 9 is pressed.
2. use the number keys and enter the code 1 0 0 7. the signal LED ( ) flashes twice again.
3. your remote control is now blocked against any reprogramming.
note:
the code lock is active if the signal LED ( ) flashes long once (2 seconds) and not twice
briefly as usual when trying to programme it.
4. in case you want to deactivate the code lock repeat steps 1 to 3.
multi code remote control
for some LG, Philips, Vestel/Telefunken or Samsung hospitality series TV models up to 9 different
TV sets of the same model can be operated in a room without interferences. please consult the TV
manual for further information how to setup this feature in the TV menu. if the TV supports this
function the remote control needs to be programmed with following codes.
1. press and hold and simultaneously until the signal LED ( ) flashes twice.
note:
your remote control exits the programming mode automatically if no further input is made
within 10 seconds or if any other key except number keys 0 to 9 is pressed.
2. use the number keys and enter one of the following code numbers.
2 9 7 X LG (X… 0 no paring, X… 1 to 9 for pairing 1 to 9)
2 9 5 0 –2 9 5 3 Philips RC6 with exit (blue … no paring, red, green, yellow)
2 9 5 4 –2 9 6 3 Philips RC6 with exit (TV0 –TV9 pairing)
2 9 2 0 –2 9 2 3 Philips RC6 with back (blue … no paring, red, green, yellow)
2 9 2 4 –2 9 3 3 Philips RC6 with back (TV0 –TV9 pairing)
2 9 4 0 –2 9 4 3 Philips RC5 (MENU+1 …no pairing, MENU+2, MENU+3, MENU+4)
2 9 9 X Samsung (X… 0 no paring, X… 1 to 9 for pairing 1 to 9)
1 5 0 3, 1 1 5 0, 1 1 5 8, 1 1 6 1 Vestel/Telefunken (TV1 … no pairing, TV2-TV4)
example: 2 9 7 7 for LG pairing ID 7
the signal LED ( ) flashes twice, to indicate that the code has been accepted.