1SAFETY & GENERAL INFORMATION
Warning
⚠Read all instructions and warnings in this manual as well as the engine manufacturer's manual before
operating this equipment.
⚠Verify all seals and clamps for all connections are tightened before each use of this equipment.
⚠This equipment is designed for outdoor use only.
⚠Be sure to always wear personal protective equipment when operating this equipment.
⚠Carefully read all Material Safety Data Sheets (MSDS) for sealer products being used before operating this
equipment. Refined coal tar sealer can cause health risks if not properly handled.
⚠Only genuine replacement parts should be used for any replacements or repairs. Do not attempt to modify or
alter this product in any way.
⚠This equipment should only be used to spray refined coal tar emulsion sealer without additives such as:
polymers, sand, or any other chemical agents.
Required Tools
Required:
1/2" Wrench
10" Pipe Wrench (with 1.5" Jaw) or Vice
Adjustable Wrench (1.5")
Torque Wrench: Capable of tightening to 40-85 in-lbs
Optional:
Needle Nose Pliers
Adjustable wrenches to substitute for any wrench above
Additional Tools Required if Hose Reel purchased with System:
5/16"/ 8 mm Socket or Flat Head Screwdriver
10 mm wrench or socket
2 x 13 mm wrenches or sockets
2 x 17 mm wrenches or sockets
Utility Knife
#2 Phillips Screwdriver
